Stars
a tool to automatically calibrate the pressure advance setting for FDM 3D printers running the Klipper firmware using a low cost USB (endoscope) camera and computer vision.
A hotend with an integrated load cell, for nozzle probing, and a lot more.
x86-64 symmetric multiprocessing MS-DOS extender
Scripts to build a trimmed-down Windows 11 image.
Everything I know about running LLMs locally
AkiraOS is a modular, security-focused embedded platform for resource-constrained devices. Built on Zephyr RTOS with WebAssembly (WASM) runtime support and container technology
An open-source RISC-V firmware platform for ESP32-C6(8MB Flash). Implements a BIOS/Payload architecture with a custom system call interface (ABI), independent LP-Core coprocessor management, and an…
A port of Quake (1996), powered by the PolyCSS 3D engine.
Bomfather tools used to demonstrate exploits and write better security
Nintendo 3DS homebrew application that embeds a full RISC-V emulator to boot a Linux environment inside the 3DS Horizon OS.
Linux payload implementing HV exploits to run a custom bootloader
An agnostic AI-driven exploratory test framework that intelligently explores, tests, and validates any application
This is a opensouce, cheap, with RGB indicator, common to Marlin's display, supports offline printing, resolution is 12864, display area is 2.4'', SD card holder can be side or vertical, convenient…
Registers calibration script for TMC drivers
µStreamer - Lightweight and fast MJPEG-HTTP streamer
Reduce the space taken up by games and programs on disk by using native Windows APIs
Filament Loading À la Prusa - A set of Klipper macros for filament loading
recepies for klipper, moonraker and mainsail and their dependencies