Skip to content
sl2365Public

About

Multi-mode Delay plugin with Sequencer and preset browser

Resources

Stars

6 stars

Watchers

0 watching

Forks

Latest commit

 

History

39 Commits

Folders and files

Repository files navigation

Afterglow

Release Release Date Latest Asset Downloads Total Downloads

Afterglow is a stereo VST3 delay by sl23 for the Dead Channel Audio plugin suite.

Credits: Many thanks to Artvera for the logo.

Afterglow

Afterglow

Afterglow

Afterglow

Build and installation

Project root: _Projects\Afterglow, beside the shared _Projects\_Tools folder.

  1. Save the current PolyHostInterface project because the build closes PHI automatically.
  2. Double-click - Build.bat.
  3. Wait until BUILD SUMMARY shows all four checks as PASS.
  4. Use the portable Windows x64 plugin at dist\Afterglow.vst3.
  5. If the build fails, send the newly generated Results.log.

The build uses JUCE 9.0.4, CMake 4.4.2 and Visual Studio Community 2026 x64 from the existing shared tool folders. It does not install the plugin automatically.

Requirements

  • Windows x64
  • A 64-bit VST3 host
  • A writable VST3 folder if Afterglow's portable settings, presets, sequences and Models are to remain beside the plugin

Current delay modes

Digital

Uses dual read-head crossfades when the delay time changes. This avoids intentional varispeed pitch sweeps and keeps ordinary timing changes clean. Mod Amount and Rate drive a smoothly rounded triangle LFO whose physical excursion follows the delay time: short delays stay concentrated in the flanging range, while delays of 250 ms and longer can use the complete 35 ms range. Single uses matched left/right motion, Dual uses 90-degree quadrature, and Ratio and Ping-Pong use 180-degree antiphase movement. At flanger-length times, only the part that would cross the 0.25 ms safety floor moves forwards. Age reduces the floating-converter resolution from pristine to deliberately coarse without adding analogue drift or wear.

Tape I

Uses a continuously moving read head, delay-time-dependent drift, two-stage high-frequency head loss and soft tape saturation. Age progressively increases bandwidth wear and compression.

Tape II

Uses a separate inertia-based transport that continuously accelerates, glides and decelerates towards a changed Time setting. Its bounded varispeed avoids an instantaneous or mechanically linear pitch ramp, while a warm two-stage head response, subtle inherent wow/flutter and level-compensated asymmetric magnetic colour produce a smoother tape echo. Age increases bandwidth wear and magnetic compression. Stereo and Multi-Tap timing use the same transport model.

Colour

Uses independent responsive virtual-clock read heads for the Left and Right Time controls. Moving either Time produces one continuous Doppler glide instead of switching or crossfading between delay positions. The effective playback speed remains between 0.25x and 4x, while four-point cubic interpolation keeps both the waveform and its slope continuous during slow sweeps, quick changes and direction reversals. Mod, Wow and Flutter move those same bounded virtual-clock targets instead of being applied after the transport, keeping automated movement as fluid as manual Time changes without allowing a read head to stall or reverse. Age morphs continuously from the exact clean cubic read at 0% into restrained companding, progressively softer bandwidth, very low signal-tracked texture and asymmetric saturation. This processing sits in the repeat path so its character accumulates naturally through Feedback. EQ and DIST remain available, and Stereo and Multi-Tap timing use the same movement and character model.

Twin Tape

Runs two independent virtual-tape read heads before the shared feedback delay. Left and Right Time define the two tape-cycle lengths. Each head can run forwards or backwards at Slow, Normal or Fast speed, corresponding to approximately half-speed, normal-speed or double-speed playback. The approved fixed-window forward pitch transport is retained for its dense musical echo. Reverse uses longer speed-aware Hann-overlapped loops: Normal spans one selected Time, Slow spans two and Fast spans half, while a responsive virtual transport eases Time adjustments into the reverse heads instead of rigidly resizing their grains. The Pitch panel becomes the TAPE I and TAPE II speed/direction selectors; the four character controls default to independent AGE I, SHINE I, AGE II and SHINE II; and the filter panel becomes GAIN I and GAIN II. The small amber LED between the character rows switches that panel to the original DIST, shared AGE, WOW and FLUTTER controls without changing either page's values. Per-head Age adds independent pitch warble, chorusing, event-like dropouts, signal-tracking texture and soft saturation, while Shine remains an independent head-brightness control. Shared Age adds common bandwidth wear and asymmetric saturation, and DIST, WOW and FLUTTER remain fully available for broader character. Spread moves continuously from two complete stereo tape layers at 0% to separately assigned Tape I/Tape II sides at either polarity. The Multi-Tap selector is hidden and inactive in this mode because the two virtual tapes already form its timing topology; its stored setup returns unchanged in other modes.

Twin Tape has a dedicated preallocated Freeze capture. Freeze retains each head's own cycle length, and speed, direction, Age, Shine and Gain remain live while the captured material repeats. Releasing Freeze crossfades back to the continuously running delay path. Feedback, Cross, Ducking, Diffusion, Modulation, Mix and Output remain available around the Twin Tape engine.

HiFi

Uses continuous varispeed delay movement like a studio reel-to-reel delay, while remaining much brighter and cleaner than Tape I. Gentle inherent saturation and drift distinguish it from Digital; Age adds restrained bandwidth wear and asperity texture.

Brigade

Models a deliberately dark bucket-brigade delay with two-stage, delay-dependent bandwidth loss, continuous clock movement, companding, progressively coarser resolution, signal-tracking noise and stronger controlled saturation.

Ghost

Uses a continuously moving analogue-style delay feeding a quadrature frequency shifter. Shift moves both channels from -1000 to +1000 Hz with fine resolution around zero; Detune adds 0-100 Hz of left/right separation around that central value. The spectral displacement accumulates naturally through the feedback loop, including Multi-Tap, while Age progressively darkens and saturates the shifted repeats.

Grain

Uses four constant-energy, Hann-overlapped forward grains per channel. Shift transposes the grain playback from -24 to +24 semitones and Detune separates the two channels; unlike Pitch, the overlapping grain stream remains active at a zero-semitone shift. Age shortens the windows, increases their stereo scatter and progressively reduces floating-converter resolution. Mod Amount expands the moving scatter and Mod Rate changes its speed. The complete granular return enters Feedback and is also available to every Multi-Tap head.

Pitch

Uses two overlapping, windowed read heads per channel to transpose each delayed return from -24 to +24 semitones. Detune offsets the left and right shifts around that central value. Age reduces the floating-converter resolution. The result enters the feedback loop, so the selected interval accumulates across successive repeats rather than acting as a one-off tonal treatment.

Pitch Rev

Uses two overlapping reversed grains per channel and places their transposed result inside the feedback loop. Each Time control sets that channel's splice length; Shift changes reverse playback pitch and Detune offsets the channels around it. Below 40 ms, the overlap progressively focuses around each micro-splice so settings such as 7.0/4.3 ms remain distinctly granular without creating hard boundaries. Age reduces the floating-converter resolution. Above-unity regeneration includes a small fixed loss proportional to transposition distance, allowing large shifts to move out of band and decay instead of locking the saturator into a permanent sub-bass tone. The result is a reversed, pitch-moving wash rather than Pitch mode played backwards after the delay.

LoFi

Uses a deliberately worn-tape path with permanent two-stage bandwidth loss, level instability, asymmetric odd/even harmonic colour, coarse texture and signal-tracking hiss. Stereo-decorrelated random drift, inherent wow/flutter and scrape motion remain active before any controls are raised, while Mod Amount, Mod Rate and Age intensify the instability. Its nonlinear stage is level-normalised so the character no longer masquerades as a longer or louder feedback decay.

Crystal

Uses a pristine bright digital path with smoothly rounded triangle-wave modulation and a nearly colourless soft-knee feedback limiter. Low Cut, High Cut and a steep Age-controlled low-pass filter colour the audible return outside the feedback loop, so the repeats retain their brightness instead of becoming progressively darker on every circulation.

Phaser

Places a selectable 2/4/6/8/10/12-stage stereo phaser inside the regenerating delay path. Mod Amount controls notch-sweep depth, Mod Rate controls speed, RES controls internal resonance and STAGE changes the notch count. AGE remains visible but disabled. All twelve stages stay warmed and stage changes crossfade smoothly instead of exposing cold filter state or switching abruptly. A fixed resonance-derived gain normalises only the Phaser signal returning to the outer delay loop, so Feedback below 100% remains decaying even when a sweeping resonant peak is stronger than unity; the audible first echo and Phaser resonance remain unattenuated.

Pitch Lush

Combines a pitch-shifted delay voice with a second stereo-detuned voice at the same overall delay time. Shift sets the main transposition, Detune separates the channels in both voices, and P MIX blends continuously from the detuned voice at 0% to the shifted voice at 100%. Positive shifts also introduce a restrained, energy-normalised upper voice as P MIX rises, giving octave-up settings a brighter cascading shimmer without raising the loop's nominal level. The combined result enters feedback so pitch structures build across repeats.

Chromatic

Uses its own continuous tape path with a cleaner transport, brighter two-stage head response, restrained inherent wow/flutter and higher feedback headroom than Tape I. Age moves from open and clean to dark, compressed head wear, while the mode deliberately omits tape-noise and splice-style artefacts.

Analogue

Uses a brighter, quieter bucket-brigade path with roughly twice Brigade's working bandwidth, finer companding resolution, restrained clock motion and approximately half its noise. Age progressively narrows the bandwidth, raises the clock texture and drives a thicker asymmetric analogue saturation stage.

Chaotic

Uses independently wandering delay intervals and pitch ratios for the two channels. The motion is smoothly interpolated rather than stepped, remains inside bounded delay and pitch ranges, and regenerates through the feedback path to form evolving forward patterns.

Pure Reverse

Uses overlapping reverse grains at the original pitch. Each Time control sets the grain length, while Feedback layers the reversed material without introducing the transposition of Pitch Rev.

Chaotic Rev

Combines overlapping reverse grains with the independently wandering delay and pitch motion of Chaotic. Feedback produces tumbling, irregular reverse layers while all motion and return levels remain bounded.

Forward Rev

Pairs a clear forward audible repeat with a separate reverse-grain regeneration path. The reverse feedback path has independent filtering and diffusion state, allowing a clouded reverse tail without smearing the first forward echo.

Controls

Timing and routing

  • Independent Left and Right delay times from 1 to 2000 ms with 0.1 ms precision below 100 ms.
  • The MULTI LED in the Timing panel switches between the normal stereo timing page and a compact four-tap page without discarding either page's settings.
  • Each of the four taps has its own Time, bipolar Pan, Volume and numbered On LED. The tap number is drawn inside the switch itself, removing the redundant row-number column. A single global SYNC LED changes all four Time knobs between their independently stored millisecond values and musical divisions, which keeps rhythmic patterns coherent while retaining per-tap timing.
  • Multi-tap page changes, tap enable changes, time movement, pan and volume are smoothed. Active tap levels use fixed RMS normalisation, preventing a four-tap pattern from creating an uncontrolled level jump without introducing envelope pumping.
  • Dedicated Left and Right Tempo Sync LEDs let either channel use milliseconds or musical note divisions independently. Straight choices run from 1/128 through 4/1; dotted and triplet choices begin at 1/64.
  • Link L/R makes the disabled Right Time knob follow the complete Left timing state—value and free/synced interpretation—without overwriting Right's stored millisecond, note-division or sync setting. Unlinking restores all three Right settings.
  • Switching either Tempo Sync LED never converts or overwrites that channel's stored millisecond and note values.

Mode selection and status

  • The Mode and Distortion Type choices use readable title case and are shown alphabetically while retaining their direct parameter identities. Both popups always open downwards with the first item at the top, use the selectors' text colour, a restrained dark hover rectangle inset from the two-pixel coloured border, and retain the current mode colour around that border. Wheel handling still advances exactly one item per physical movement from the first movement.
  • The two Tempo Sync LEDs illuminate green, Link L/R illuminates amber and Ping-Pong retains its teal status colour.

Feedback, Freeze and stereo image

  • Feedback runs from 0% to 200%. The displayed 0-80% maps directly to loop regeneration. From 80-97%, a smooth transition reaches the high-feedback square-root response; 97-100% continues through exact unity. The displayed 100-200% range maps linearly to 100-125% internal regeneration. Above exact unity, a common unity-slope saturation fades in after each mode's own feedback colour, retaining self-oscillation while giving loud limit cycles a denser, warmer harmonic shape. Pitch Rev adds a small fixed transposition-dependent loop loss above unity so large shifts can leave the audible band instead of locking into a permanent sub-bass tone. Per-mode saturation and stereo-linked static wet-output safety keep extreme output bounded without envelope-following gain or compressor pumping. Cross Feedback remains continuously variable; at 100% Cross, each repeat feeds the opposite channel while retaining normal stereo input routing.
  • The compact snowflake button smoothly excludes new input and captures one complete recent wet-delay cycle for decay-free repetition. Stereo channels retain their own periods, Ping-Pong captures a complete two-leg circuit and Multi-Tap uses its longest active pattern. The live engine continues underneath, so releasing Freeze crossfades back to the ordinary tail rather than clearing it. The neighbouring LED selects MOMENTARY—the default, active only while held—or TOGGLE, which latches and releases Freeze on successive clicks.
  • Ping-Pong is a dedicated smoothed topology: it sums the input safely into the Left delay, transfers the processed Left output directly into the Right delay, then applies FDBK only when the Right output returns to Left. A complete stereo circuit receives one Feedback multiplication. Turning Ping-Pong off restores the Cross knob's normal stereo matrix without a hard switch.
  • Bipolar Spread from -100% to +100% controls delayed-signal width without changing the Cross-feedback rhythm: 0% centres the repeats, +100% gives full width and negative values reverse their left/right placement. It has a centre detent.

Ducking, diffusion and modulation

  • Duck from 0% to 100% reduces only the audible wet return while new input is present. The dry signal and internal feedback regeneration remain untouched, so repeats recover naturally instead of being erased from the delay loop.
  • Duck Attack ranges from 1 to 500 ms and Duck Release from 20 to 3000 ms. A stereo-linked peak envelope prevents the delayed image from shifting sideways while it ducks.
  • Diffusion Amount from 0% to 100% controls the coefficients, density and decay of a four-stage stereo allpass cascade; values below 1% bypass it, 68% gives a balanced fade-in/fade-out region and high settings can form a reverb-like tail without relying entirely on Feedback. Diffusion Size sets the network span from 2% to 100% of the displayed delay while the primary stereo or Multi-Tap read heads remain at their selected times, so increasing Size grows the cloud after each tap instead of pulling the tap earlier. Paired slow internal movement scales with the span and has no net delay-time drift.
  • Mod Amount from 0% to 100% controls delay-time movement. The available physical range begins at 2.5 ms for near-zero delays, increases with the selected delay time and reaches 35 ms at 250 ms. Digital and Crystal use rounded triangle motion; LoFi uses stereo-decorrelated random drift; Phaser uses the same 0-100% range for its notch sweep. Single uses matched stereo phase, Dual uses 90-degree quadrature, Ratio and Ping-Pong use 180-degree antiphase, and Quad staggers the four tap pairs. Mod Rate ranges from 0.02 to 10 Hz. Digital and Crystal move the otherwise-negative part of very short sweeps forwards from a 0.25 ms safety floor.

Pitch and mode-specific controls

  • In Grain, Pitch, Pitch Rev and Pitch Lush modes, bipolar Shift selects -24.00 to +24.00 semitones. Bipolar Detune selects a -1.000 to +1.000-semitone total stereo difference in 0.001-semitone (0.1-cent) steps: Left receives half below the Shift value and Right half above it; a negative Detune reverses that relationship. One semitone equals 100 cents, so this Detune range is exactly -100 to +100 cents.
  • Shift and Detune have centre detents in the pitch modes. In Ghost the panel attaches to separate Hertz parameters: bipolar Shift covers -1000 to +1000 Hz and unipolar Detune covers 0-100 Hz. In Phaser the same panel becomes active RES and stepped STAGE controls; elsewhere it is visibly unavailable.
  • In Twin Tape the same panel becomes two stepped tape controls. Each selects REV FAST, REV NORM, REV SLOW, SLOW, NORMAL or FAST. The character and filter panels simultaneously expose the matching per-head Age, Shine and Gain parameters.

Filtering, distortion and output

  • Per-mode saturation and a stereo-linked static wet-output knee keep dense tails controlled without envelope detection, compressor pumping or time-varying gain inside the feedback loop. The safety stage is exactly transparent below -2 dBFS, approaches a -0.5 dBFS wet ceiling and remains before MIX and OUT so deliberate output boosting is still available.
  • MIX balance and OUT gain.
  • MIX has a 50% centre detent; OUT has a 0 dB centre detent. Their indicator arcs grow outwards from their centre positions.
  • The padlock beside the main MIX control preserves the current Mix level across preset changes. Its icon turns yellow while locked, and adjusting either visible Mix knob updates the retained level.
  • Double-clicking any audio knob restores that parameter's value from the current preset or host-saved state. Saving or Save As establishes the new reset values immediately. Theme remains a global interface setting and keeps its independent reset.
  • Low Cut and High Cut applied to every echo, including the first.
  • DIST sets the input-distortion amount. Distortion Type contains 17 choices: SOFT CLIP, the established dense tanh circuit; SATURATION, a more open arctangent curve; TUBE, an asymmetric rounded valve-like curve; RECTIFY, an octave-rich full-wave fold; CRACKLE, signal-responsive broken-contact pops; LIGHTNING, sharp clipping charged with signal-tracked noise; AMP, cascaded asymmetric amp-style stages; BUMPY, frequency-shaped nonlinear ripples; ASYM, contrasting positive and negative transfer curves; RAZOR, bright upper-mid pre-emphasis and ridged shaping; PIXELATED, progressively coarser sample hold and bit reduction; COMB, a short damped resonant circuit; STRESSED, compressed asymmetric folding; SAMURAI, dead-zone slicing with a metallic edge; FRESH, high-band excitation over cleaner saturation; HARD CLIP, clean flat-threshold clipping; and FUZZ, high-gain asymmetric clipping with compressed sustain, DC removal and a darker post-clip tone. Type changes crossfade smoothly, stateful choices use bounded preallocated state and DC removal where required, and input distortion never re-processes recirculating repeats.
  • Wow and Flutter add user-controlled movement in every ordinary mode. Tape I, Tape II, Chromatic, Brigade, Analogue, HiFi and LoFi retain mode-specific movement so selecting the mode alone changes its character. Twin Tape replaces these two controls with independent AGE II and SHINE II controls; each tape head already has its own speed variation and wear motion.
  • Age reduces floating-converter bit depth in Digital, Pitch and Pitch Rev; shortens and scatters the forward grains in Grain; deepens head loss and saturation in Tape I; adds head wear and magnetic compression in Tape II; morphs Colour from exact-clean into restrained companding, bandwidth softening and asymmetric saturation; controls head wear in Chromatic, bandwidth/compander texture in Brigade, quieter bucket-brigade wear in Analogue, restrained wear and asperity in HiFi, spectral wear in Ghost, instability in LoFi, and steep output low-pass filtering in Crystal. It is disabled in Phaser, replaced by P MIX in Pitch Lush, and becomes the independent AGE I control in Twin Tape.

Editing and contextual information

  • The fixed two-line contextual information area occupies the lower-left 683 design pixels inside the coloured surround. The lower-right area beneath the last two panels remains clear for future buttons, and the eight-pixel bottom margin matches the side margins.
  • Hover help identifies the actual control in its first line instead of using a generic Afterglow or Sequencer heading. The Preset Browser button is included.
  • The main !!! button randomises only the delay controls, including Mode, Dist Type and Echo Offset. It never changes sequence steps, Gate states, target assignments, sequencer controls, power or Freeze; the sequencer's own menus provide independent step and Gate randomisation.
  • Echo Offset is active only in the Chaotic and reverse-family modes that use it; its label, guide and handle visibly dim elsewhere.
  • Rotary value fields retain their normal appearance, while clicking one opens an 18-pixel-high editor that displays the complete typed value without clipping its lower edge.
  • Top-right Power indicator uses a clearer green illumination while processing is active and remains unlit while bypassed. Host bypass automation remains conventional, uses a smoothed dry/processed transition and leaves the delay engine running.

Panel layout

  • FDBK, CROSS and SPREAD share a shallow upper panel aligned with Hi Cut.
  • DUCK, ATTACK and RELEASE share a matching lower panel aligned with Lo Cut.
  • DIFF AMT–DIFF SIZE and MOD AMT–MOD RATE each occupy a dedicated vertical panel.
  • MIX–OUT is the rightmost panel because it is last in the audible signal chain.
  • The coloured frame has equal left and right insets around the control panels.
  • The complete upper and lower control rows retain the enlarged separation between Feedback and Ducking. The LED — TEMPO SYNC — LED row sits directly beneath the Left and Right Time knobs, with Link L/R and Ping-Pong on the lower timing-switch row.

Colour and header

  • The main panel background follows the selected mode. Tape I uses RGB 61, 100, 6; Brigade 100, 35, 70; HiFi 193, 69, 33; Ghost 130, 67, 110; and Forward Rev 89, 71, 107. The remaining modes retain their established colours.
  • Every rotary indicator and combo-box arrow uses a restrained warm yellow, while LEDs retain their dedicated status colours.
  • The Link L/R and Ping-Pong captions use the same muted colour as the Theme caption for a quieter, consistent switch row.
  • The small Theme knob beside Power has no numerical readout. Turning it clockwise fades only the large surround from charcoal into the selected mode colour. The seven-pixel strip is always painted above it at the selected mode's exact colour and full opacity—its colour and alpha never change. At maximum Theme the surround reaches that same colour, so the unchanged strip naturally blends into it.
  • The strip has a two-pixel clear gap above the control panels. The surround extends ten pixels beyond the panels at both sides, matching the panels' ten-pixel top inset.
  • Artvera's transparent 701×167 Afterglow logo sits at the upper left. Clicking anywhere on the logo opens the GUI Zoom menu. The compact version label is directly above the Power button, leaving the middle of the header clear for preset navigation.
  • Mode, Dist Type and the compact Freeze controls occupy the left side of the header. A rounded current-preset field is followed by adjacent, equal-sized previous/next buttons and the list-icon preset-browser button. The arrows use the selectors' stroked yellow chevron, rotated left and right. Wheel movement over the field loads one preset, while clicking it opens a two-pixel mode-coloured popup with at most 20 visible, scrollable rows.
  • Theme and Power use matching 30×30 controls on the same lower header baseline. The Theme label is two pixels lower for better visual alignment without moving either control.

Scaling and preset browser

  • Dragging the bottom-right corner scales the complete interface from 75% to 300% at a fixed aspect ratio. Clicking the Afterglow logo opens a conventional GUI Zoom menu with fixed choices from 75% through 300% in 25% steps. While resizing, the contextual-help area shows the current percentage and exact pixel dimensions.
  • The last scale and Theme setting are stored globally in Root\Afterglow_Data\Settings\Settings.ini, outside audio presets and host project state. On first use, an existing Root\Afterglow folder is renamed automatically with its complete contents intact.
  • The list-icon button hides the inner control panels and contextual-help strip, then opens the browser inside the coloured surround without changing the GUI height. The left 30% presents the folders beneath Root\Afterglow_Data\Presets without showing the parent Presets folder itself. The preset area uses two name columns beside a vertical column of three matching 26x26 action buttons.
  • A permanent virtual Favourites folder appears first in the folder panel. Every listed preset has a grey star; clicking it turns yellow and adds that original file to Favourites. Unstarring removes only the reference and never deletes, moves or duplicates the preset. Favourite paths are stored portably in Root\Afterglow_Data\Settings\Favourites.ini.
  • Right-click a preset and choose Copy preset, then right-click a real folder, a preset row or empty preset-list space and choose Paste preset here to create an independent file. Existing names are protected with automatic Copy, Copy 2 and later suffixes. The virtual Favourites folder deliberately cannot receive pasted files.
  • Right-click the folder panel for New folder... and Delete folder.... New creates a child of the selected real folder; using it from the virtual Favourites entry creates a top-level preset folder. Delete is unavailable for Favourites and always asks for confirmation before moving the complete folder and its contents to the system Recycle Bin or Trash.
  • Single-click or Return loads a preset. Loading a preset keeps the selected browser folder in view. The header arrows or wheel-scrolling the preset field move through the current preset's folder in natural filename order and wrap at both ends. The floppy-disk icon overwrites the current preset, or invokes Save As when no preset has yet been saved or loaded; the floppy-disk-with-pencil icon always creates a new file or copy; and the folder icon opens the selected preset folder. Afterglow presets use the .agpreset extension and the current state schema only. The active preset reference survives editor and host-project reopening but is stripped from preset files; Theme, GUI scale and browser state remain global rather than becoming preset data.
  • While the preset browser is open, the header Theme control is temporarily replaced by a compact MIX copy. It controls the same Mix parameter as the main knob, has no numerical readout and cannot be dragged to a sequencer target. Closing the browser restores Theme.

Sequencer

Opening, clock and playback

  • The SEQ button at the lower-right opens or closes a second panel beneath the delay interface. Closing it restores the original GUI height; it does not stop or reset the sequence. Turning the sequencer ON LED off greys and disables every other sequencer control while preserving its complete pattern and settings; the ON control remains available to restore it.
  • The sequencer provides 32 editable steps, draggable Start and End range targets, linked range movement, independent step-value and Gate Left/Right nudge buttons, Loop, Bounce, Reverse, Played and Random directions, and rates from 1/128 to 1/1 including the available triplets.
  • Host Sync follows the DAW timeline. Played direction instead restarts from the first selected step when a new MIDI phrase begins, so Afterglow accepts MIDI input for that trigger mode.

Drawing and pattern tools

  • Click or drag vertically in the main grid to draw step values. Right-click the grid for Zero, Max, Min, Random, Reset, Save Sequence..., Copy and Paste commands.
  • Each step has a Gate button beneath it. Clicking cycles OFF, SHORT, LONG and REST: Off closes the selected Gate path for the complete step, Short and Long keep it open for the duration selected by their knobs, and Rest provides continuous 100% throughput. The Short range is 10-60% and the Long range is 65-95%.
  • The LED/label beside Long cycles the complete Gate row between INPUT, WET, FEEDBACK and OFF. Input stops new sound entering while established repeats continue; Wet rhythmically chops the audible delay tail without disturbing its internal regeneration; Feedback interrupts regeneration while allowing the current echo through. Off bypasses Gate processing without changing the Gate steps or their Short/Long settings. Each active route uses the same fast anti-click smoothing.
  • Right-click the Gate row to set every Gate to Short, Long, Rest or Off, randomise all Gate states, restore the saved Gate pattern, or copy and paste the complete Gate pattern between presets. The dedicated Gate arrows rotate only the Gate states and wrap the first and final values; the original Nudge arrows now rotate only the main step values.
  • Attack and Release shape movement into and out of each value; the bright line over the steps shows the resulting transition envelope. Their readouts are always shown as percentages, including immediately after loading a preset, and use wider fields so the text remains naturally proportioned.
  • The Waveform menu writes one of 14 ready-made shapes into the grid. Saved .agseq patterns are stored in Root\Afterglow_Data\Sequences and can be recalled from the User menu.

Modulation range and targets

  • A target control's saved value is its modulation reference. Bipolar DEPTH scales the complete sequence shape: negative values shrink it, 0% leaves the drawn curve unchanged and positive values expand a smaller curve towards the available Unipolar or Bipolar limit. OFFSET moves the resulting shape up or down without changing it. Both vertical faders draw a coloured stalk from their zero centre point to the current tab, clearly showing direction and travel while retaining the complete neutral guide rail.
  • The polarity LED cycles through three clearly labelled states. UNIPOLAR + uses the original full-height positive step display and moves from the saved target value towards the parameter maximum. BIPOLAR displays both positive and negative steps around its centre line and moves equally above and below the saved value, limited by the nearer boundary. UNIPOLAR - uses the same full-height unipolar pattern upside down and moves from the saved value towards the parameter minimum. The fixed-position LED is Aqua, rose or medium purple respectively.
  • Drag a knob's dotted label or small dotted handle into TARGETS. Up to 16 controls can be assigned. Each row has its own 0-100% Depth knob whose arc follows the currently selected Delay mode colour: 0% leaves that destination at its saved value, 50% applies half of its available movement in normalised parameter space and 100% retains the full movement set by the master sequencer DEPTH. Drag the small knob vertically, hold Shift for fine movement, use the wheel over it, or double-click it to return to 100%. Click a target's coloured dot to bypass it without removing it and click its cross to remove it. When more rows are assigned than can be shown, native clickable chevrons indicate earlier or later rows and the wheel scrolls anywhere outside a Depth knob.
  • The bold borderless !!! control sits against the upper-left of TARGETS with matching top and left visual insets. It independently randomises all target assignments, their enabled states and their individual Depths without altering the step pattern, Gate pattern or any delay control.
  • Stereo and Multi-Tap Time handles remain assignable under Tempo Sync. The same sequencer target follows the visible control, modulating milliseconds when Sync is off or musical-note divisions when Sync is on.
  • Attack, Release, DEPTH, OFFSET, START, END, SHORT and LONG can also be assigned as targets. These sequencer controls use the preceding evaluated sequence value to avoid a circular modulation dependency.

Display, colour and saved state

  • Host Sync and Animate sit above the Waveform and User selectors at the left of the upper sequencer panel. The complete upper control group is aligned five pixels farther left, giving Waveform equal left and bottom inset within the panel. Rate, Start, End, the compact range link and Direction continue alongside them, while Short, Long and the Gate-route selector occupy the space before HUE, SAT and LUM. The closed Waveform, User and Direction selectors use compact boxes and text without reducing their popup-menu fonts.
  • HUE and SAT set the sequence colour and readable target highlights. LUM adjusts the step display only, preventing assigned-target labels and the colour knobs from becoming too dark to read. All three default and double-click reset to 50%.
  • ANIMATE makes assigned controls visually follow their effective sequenced values without changing their stored values or writing host automation. The latest calculated display position is retained continuously between audio blocks, preventing the stored knob position from flashing through. Turning ANIMATE off immediately returns every control display to its saved position while audible modulation continues. Switching Afterglow's main Power off, bypassing it in the host or stopping its processing callback releases the animation overlay so targeted knobs follow manual adjustments; their animated display resumes when processing is restored.
  • Steps, Gate states, Short and Long Gate lengths, targets, every target's individual Depth, sequencer controls and HUE/SAT/LUM are stored with the plugin or preset state. Saved .agseq files also retain their Gate pattern and lengths. ANIMATE and whether the sequencer panel is open remain global interface preferences.
  • Turning the sequencer's ON switch off completely bypasses target modulation while retaining the pattern and target assignments.

Current limitations

  • Afterglow remains under active development.
  • Wow and Flutter currently have fixed internal rates.
  • Ducking currently listens to the main stereo input with a fixed detector sensitivity; external sidechain input is not implemented yet.
  • Adjustable frequency-shift controls, deeper granular processing, alternate diffusion types, A/B comparison and advanced LFO routing remain future stages.
  • Final trademark clearance for the Afterglow name has not been completed.

About

Multi-mode Delay plugin with Sequencer and preset browser

Resources

Stars

6 stars

Watchers

0 watching

Forks

Releases

Contributors

Languages