PIC32MK USB device code using MPLAB Harmony V3

실내 온습도와 조도를 웹으로 실시간 관제하는 시스템

CH32X033 as a USB multitool that allows you to configure pin, UART, SPI, and I2C settings through a terminal.

Bridge CDC Interface to PWM and Freq.

Kernel Level Timer Interrupt Latency Test ( Kernel Level Cyclictest)

This example shows how to configure the Analog-to-Digital Converter (ADC) to trigger a conversion on a specific event. The Timer/Counter type A (TCA) overflow is used to trigger the ADC sample accumulation and ADC result is transmitted through USART.

Firmware for MTB-USB module v4

3 usb to serial channel on STM32 Bluepill

Hello World and Blink example for Olimex Esp32-S2-WROVER-DevKit-Lipo-USB Board

KMS module for CDC

In the example application, the ADC result will be sent to an android/iOS app over Bluetooth communication using the RN4870 Click board. The ADC result will also be sent to a serial terminal and a 4x4 RGB Click board is used to illuminate different LEDs corresponding to the applied force on the force sensor on the Force Click board

STM32 USB CDC Virtual COM Port

This is a sample CDC setup using debezium-connector for db2 as source and kafka topic as sink.

How to send integer data with CDC_Transmit_FS. A program has been written that sends the counter value every second with the systick counter.

C library for extending and redirecting the HAL IO drivers, and provides arduino like serial functions for printing and reading.

Fork of SoX with Tomb Raider specific formats

usb midi and cdc device running on Longan Nano

A Change Data Capture (CDC) example using Debezium for data streaming.

KMDF USB Driver for Windows for communicating with ESP32-USB

CD Changer Emulator for Nissan Maxima, Pathfinder and Infinity I30.