CherryUSB is a tiny and beautiful, high performace and portable USB host and device stack for embedded system with USB IP

CH32X033 as a USB multitool that allows you to configure pin, UART, SPI, and I2C settings through a terminal.

JSON output plugin for changeset extraction

Hello World and Blink example for Olimex Esp32-S2-WROVER-DevKit-Lipo-USB Board

Raspberry Pi Pico UART-USB flasher for ESP

Logical Replication extension for PostgreSQL 17, 16, 15, 14, 13, 12, 11, 10, 9.6, 9.5, 9.4 (Postgres), providing much faster replication than Slony, Bucardo or Londiste, as well as cross-version upgrades.

STM32 USB CDC Virtual COM Port

SAAB compact disc changer emulator with Bluetooth A2DP

Example STM32F411 Black Pill STM32CubeIDE project utilizing the FreeRTOS command line example code

PIC32MK USB device code using MPLAB Harmony V3

Raspberry Pico USB Device Driver library for CDC/ACM Serial Ports

Bridge CDC Interface to PWM and Freq.

KMDF USB Driver for Windows for communicating with ESP32-USB

USB keyboard to USB CDC converter using a Raspberry Pi Pico

How to send integer data with CDC_Transmit_FS. A program has been written that sends the counter value every second with the systick counter.

Lightweight USB device and host stack for STM32 and other MCUs. Ready for USB 3.0 device.

Firmware for MTB-USB module v4

低成本CMSIS-DAP V2调试器，IO时序SPI优化，速度级别200KB/S至450KB/S

In the example application, the ADC result will be sent to an android/iOS app over Bluetooth communication using the RN4870 Click board. The ADC result will also be sent to a serial terminal and a 4x4 RGB Click board is used to illuminate different LEDs corresponding to the applied force on the force sensor on the Force Click board

A Change Data Capture (CDC) example using Debezium for data streaming.