Increasing the functionality of the segmented LCD on the MSP-EXP430FR4133.

This sketch implements a simple external hardware watchdog that can be loaded onto a low-end MSP processor to provide a watchdog reset signal. It should also work on AVR processors, although it has not been tested on AVRs

C++ objects that are drivers for various MSP430 peripherals and other chips controlled by a MSP430 using GPIO

Library and example for TI MSP430 LaunchPads and Energia that reads a card number from RFID_RC522 without RST pin

Electric bicycle main controller based on TI Launchpad. Software part.

IoT-WaterPump for automatic/smart irrigation or gardening

MSP430-based receiver hub using CC110L wireless modules.

A library for the CAP1293 touch sensor for atmega328p, ESP32, MSP430 or STM32 (or Wire.h)

MSP430-based wireless signal tester using CC110L BoosterPack.

MSP430-based low-power wireless temperature sensor using waterproof DS18B20 module. Demonstrates use of OneWire protocol and low-power wireless operation.

LLVM/clang toolchain for TI MSP430

Environment sensor with temperature, relative humidity and CO2, based on MSP-EXP430FR4133

Grant Forest (from https://www.43oh.com) DS18B20 library for TI TMS320 and MSP340 with Energia IDE

PID climate control for water heating

🗂️ Projetos com Microcontroladores

A library for the TMP112 temperature sensor for atmega328p, ESP32, MSP430 or STM32 (or Wire.h)

Sketch to take voltage measurements at regular intervals and store the data in non-volatile internal FRAM.

This repository is for Energia Projects

Sketch for MSP430-based repeater hub for an outdoor weather sensor using a CC110L BoosterPack. Listens on one channel and repeats packet on another channel.