Design and implement the following components of the SPI modules using verilog such that they match the requirements of the development testbench and match the SPI specifications: Master Slave Self-Checking Testbenches for the Master and Slave

My approach is using a SPI to collect 24-RGBs-Strips-Data and a SYNC from a impeded SoC. Another approach I came up with is to reuse the Adafruit-Neopixel-Library. I attached my FPGA_NeoPixel.h file. Technically it inherits from Adafruit_NeoPixel and overwrites the void show() with SPI-Code so you are able to use the methods from Adafruit_Neopix…

Energy Efficient SPI (Serial Peripheral Interface) Sensor Network

Popular bus implementations in Verilog HDL

Transferring data from SPI to UART using BMP280 sensor with Verilog

Modular Verilog system simulating an SPI-based temperature sensor, storing data in a FIFO, and transmitting over UART — built for embedded IoT-style applications.

Full SPI controller with variable speed clock

Two-way ASCII character transmission via SPI with display output

this is a college project of making SPI interface using verilog

8-Digit LED Display driver for FPGA

An advanced traffic light control system on the Digilent Nexys A7 FPGA

SPI module for Nexys 4 Artix-7 FPGA Trainer Board

SPI-Interface using the Master-Slave regular mode method

FPGA interface with RC522

A SPI master interface core for CPLD/FPGA

Project SEM2 - FPT jetking - CHIP DESIGN

Serial peripheral interface module written in verilog.

Improved version of http://web.mit.edu/6.111/volume2/www/f2018/tools/sd_controller.v

RTL Design of Serial Peripheral Interface