spiffy

Build a spiffs file system binary for embedding/writing onto the nodemcu ESP8266 spiffs file system

spiffy builds a binary spiffs image for you to write_flash to a esp8266 runing nodemcu so you can get all the files onto your cool IoT device in one fell swoop.

git clone https://github.com/xlfe/spiffy.git
cd spiffy
mkdir build
make

mkdir files

and add your lua scripts, etc to ./files/

$ ./build/spiffy
Creating rom spiff_rom.bin of size 16384 bytes
Adding files in directory files
init.lua added to spiffs (66 bytes)
$ ll *.bin
-rw-rw-r-- 1 build build 16384 Jan  1 21:00 spiff_rom.bin

NB: The default rom size is 16k - you can edit main.c to change this

Thanks for the info The offset for spiffs file system:

• eagle.app.v6.flash.bin: 0x00000~len( eagle.app.v6.flash.bin )
• eagle.app.v6.irom0text.bin: 0x10000~0x10000 + len( eagle.app.v6.irom0text.bin )
• spiffs_embed.bin: (0x10000 + lengthof(iromtext) + 0x4000) & (0xFFFFC000)
• Ie: next to the irom0text.bin, but aligned to 4 * 4096 Bytes (0x4000).

For example:

uild@build:/opt/Espressif/nodemcu-firmware/bin$ ll
drwxrwxr-x  3 build build   4096 Dec 31 16:38 .
drwxrwxr-x 17 build build   4096 Jan  1 20:23 ..
-rw-rw-r--  1 build build  52064 Dec 31 16:25 eagle.app.v6.flash.bin
-rwxrwxr-x  1 build build 293568 Dec 31 16:25 eagle.app.v6.irom0text.bin

So to burn my image I would run:

esptool.py --port /dev/ttyUSB0 write_flash STARTADDR ../../spiffy/spiff_rom.bin

• Ie: STARTADDR = (0x10000 + lengthof(iromtext) + 0x4000) & (0xFFFFC000)