npm install fe-mock
将以下代码加入项目启动文件中：（webpack.proxy 例）
require('fe-mock')();
webpackDevServerConfig.proxy = {
'/api/**': {
target: 'http://127.0.0.1:9998'
}
}
你可以使用任何代理服务，但映射端口必须指向femock.conf.json中的设置
femock.conf.json 例：
{
"confDir": "mock_conf/",
"dataDir": "mock/",
"port": "9998",
"exceptionStatus": {
"404": {
"ret": 404,
"retMsg": "url is not found!"
},
"500": {
"ret": 500,
"retMsg": "request is error!"
}
}
}
business.conf 例：
{
"des": "interface of the business",
"api": "/api/project",
"type": "get",
"defaultJson": "project.json",
"ifArr": [
{
"ifState": "page==2",
"returnJson": "project2.json"
}
],
"httpCode": 500,
"timeout": 0
}
npm start
confDir 接口配置文件所在目录/The directory where the interface configuration file is located
dataDir 本地数据文件目录，全使用http网络数据可不填/Local data file directory,ignore this if you get data from internet
port 模拟数据服务启动端口/Analog data service startup port
exceptionStatus 设置异常状态时返回的数据/The data returned when the exception status is set
des 接口描述/Interface description
api 访问接口路由地址/Access the interface routing address
type 路由请求类型/Route request type
defaultJson 默认接口数据/default data
ifArr 条件表达式返回数据，选填/Conditional expression returns data,Optional
httpCode 异常状态码，选填/Http status code,Optional
timeout 延迟返回，单位：毫秒，为负数时会请求中断/Delayed return in milliseconds,a request is interrupted when it is negative
npm install fe-mock
Add the following code to the project startup file：（webpack.proxy example）
require('fe-mock')();
webpackDevServerConfig.proxy = {
'/api/**': {
target: 'http://127.0.0.1:9998'
}
}
You can use any proxy service as long as the configuration is configured into the port of 'femock.conf.json'
femock.conf.json example：
{
"confDir": "mock_conf/",
"dataDir": "mock/",
"port": "9998",
"exceptionStatus": {
"404": {
"ret": 404,
"retMsg": "url is not found!"
},
"500": {
"ret": 500,
"retMsg": "request is error!"
}
}
}
business.conf example：
{
"des": "interface of the business",
"api": "/api/project",
"type": "get",
"defaultJson": "project.json",
"ifArr": [
{
"ifState": "page==2",
"returnJson": "project2.json"
}
],
"httpCode": 500,
"timeout": 0
}
npm start