Tags: MrVan/u-boot

power: regulator: Kconfig: add SPL_DM_REGULATOR_FAN53555

Symbol CONFIG_SPL_DM_REGULATOR_FAN53555 is selected by
SPL_DM_PMIC_FAN53555 and used in a Makefile. But the
symbol definition is missing.

Add the missing configuration symbol.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8mp_evk: Enable the DWC EQoS iMX driver

Enable the EQoS i.MX driver in defconfig, also enable the PHYLIB
to facilitate the case that only has FEC enabled.

Signed-off-by: Ye Li <ye.li@nxp.com>

doc: imx8mp-evk: update after using binman

update doc after using binman to pack images

Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx: timer: Modify GPT timer driver for mx7

Modify the GPT common platform driver for mx7 which only use 24Mhz
OSC as clock source.

Note: at default, the mx7d will use system counter as timer. The GPT
is disabled.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>

imx8mq: configs: add support for distro boot commands

Supported boot device types in iMX8MQ: MMC, DHCP.

CONFIG_DISTRO_DEFAULTS is added for enabling the DISTRO_DEFAULTS option.

CONFIG_BOOTCOMMAND which is defined in include/configs/imx8mq_evk.h is
deleted because "run distro_bootcmd" is required to be the default boot
mode.

scriptaddr is the location in RAM where boot.scr.uimg/boot.scr will be
loaded to prior to execution.

kernel_addr_r is the location in RAM where the kernel will be loaded to.

Delete unnecessary environment variables because "run distro_bootcmd" is
set to be the default boot mode.

Signed-off-by: Alice Guo <alice.guo@nxp.com>

mmc: fsl_esdhc_imx: replace all readl/writel to esdhc_read32/esdhc_wr…

…ite32

Currently, readl/writel and esdhc_read32/esdhc_write32 are used. To align
the usage, change to only use esdhc_read32/esdhc_write32.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>

mmc: xenon_sdhci: Add missing common host capabilities

Use mmc_of_parse() to set the common host properties. That includes
"bus-width", so parsing it can be removed from the driver.

But more importantly, "non-removable" is now respected, which fixes
the usage of eMMC.

Signed-off-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Konstantin Porotchkin <kostap@marvell.com>
Tested-by: Marek Behún <marek.behun@nic.cz>

mmc: msm_sdhci: Use mmc_of_parse for setting host_caps

Since the introduction of 'get_cd' callback in sdhci core,
dragonboard410c's MMC interface is broken. It turns out that 'get_cd'
callback checks for the host_caps for validating the chip select. And
since the msm_sdhci driver is not parsing the host_caps from DT, not
all of the cababilities are parsed properly. This results in the MMC
interfaces to be broken.

Hence, fix this by adding a call to 'mmc_of_parse' during driver probe.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Aníbal Limón <anibal.limon@linaro.org>
Reviewed-By: Ramon Fried <rfried.dev@gmail.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>

mmc: sdhci: Use upper/lower_32_bits macros

Instead of recasting and shifting use macros which are designed for taking
upper/lower 32bit value from 64bit variable.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

imx8mm_evk: enlarge CONFIG_SYS_BOOTM_LEN

Enlarge CONFIG_SYS_BOOTM_LEN when booting FIT image with kernel.

Signed-off-by: Peng Fan <peng.fan@nxp.com>