Skip to content
mupqPublic

About

Provides common files for instances of mupq, e.g., for pqm4 and pqriscv

Resources

Stars

15 stars

Watchers

7 watching

Forks

Repository files navigation

mupq

Provides common files for instances of mupq, e.g., for

Several boards on one host

When more than one debug adapter is attached, the flash step has to be told which one to use. Two environment variables select the adapter by its serial number:

Variable Used by Effect
MUPQ_OPENOCD_SERIAL OpenOCD, OpenOCDITM passed to OpenOCD as adapter serial <serial>
MUPQ_ST_FLASH_ARGS StLink extra arguments to st-flash, e.g. --serial <serial>

Unset, the flash commands are unchanged.

The serial numbers of the attached ST-LINK adapters are listed by

st-info --probe

or, on macOS, by

system_profiler SPUSBHostDataType

For example, to flash a board through OpenOCD and another through st-flash on the same host:

export MUPQ_OPENOCD_SERIAL=066BFF575550897767144107
export MUPQ_ST_FLASH_ARGS="--serial 066CFF485648756687012533"

Serial baud rate

The serial platforms (OpenOCD, StLink) read the board's output at 38400 baud by default. MUPQ_BAUD sets another rate, which must match the rate the firmware was built with:

export MUPQ_BAUD=115200

License

Different parts of mupq have different licenses. Each subdirectory containing implementations contains a LICENSE file stating under what license that specific implementation is released. The files in common contain licensing information at the top of the file (and are currently either public domain or MIT). All other code in this repository is dual-licensed under Apache-2.0 and under the conditions of CC0.

About

Provides common files for instances of mupq, e.g., for pqm4 and pqriscv

Resources

Stars

15 stars

Watchers

7 watching

Forks

Releases

Packages

Used by

Contributors

Languages