Skip to content

Releases

Slab 0.0.24

Choose a tag to compare

@nooga nooga released this 16 Nov 20:56
v0.0.24
15062d2
  • Rhodes E-Piano barks. The pickup is refitted to a sampled 1977
    Mark I: hard notes swing past the pickup and growl, most in the bass,
    soft ones stay round, the bell ping is as faint as the real one, and
    notes ring as long as the instrument's. All four presets are redone.
    DRIVE and BELL mean something different now, so saved Rhodes parts sound
    different.
  • Fretwire slaps. BUZZ is now the frets themselves: a string that
    swings far enough hits the last fret and rattles. A new SLAP knob is a
    thumb that drives the string onto the fret, and the slap preset plays
    the low strings thumbed and E2 and up popped from one track; thumb and
    pop are each alone. Projects and presets with BUZZ above 0 sound
    different (it used to be a soft limiter); BUZZ 0 is unchanged.
  • Fretwire's fingered bass rings like the recording. The default,
    p-bass, fingers-bridge and pick presets (and the DECAY, HF DEC and
    KNEE defaults) are refitted to a sampled roundwound bass: the low
    mids sustain longer and the top dies sooner. Saved projects keep their
    own knob values; ones that load these presets by name sound different.
  • Skinwork Kit: the cymbals and hats are rebuilt as three ringing
    plates with real nonlinear coupling and no noise. They are bright from
    the hit, hard hits bloom, a second hit adds to a cymbal that is still
    ringing, and a closed hat chokes an open one. Kick, snare and tom
    overtones now die faster than the fundamental. Projects that use the kit
    will sound different, and each piece's level has been retrimmed.
  • Magnet Zither, a new instrument: ten strings in one of seven tunings,
    plucked from the keys, and two spinning magnet discs that make them drone
    with no note held. Sweep a disc's SPIN to walk through the tuning's
    partials. Magnet Zither FX is the same strings as an insert that
    answers the notes in whatever you feed it.
  • Tape Echo, a new effect: a tape loop past four playback heads. Short
    loops are a multi-head echo, SWELL smears the heads into a wash, long
    loops are sound on sound, and FREEZE holds the tape. Changing SPEED bends
    the pitch while the motor catches up, with wow, flutter, hiss and pops to
    taste.
  • Tonewheel Organ, a new instrument: 91 wheels that never stop, nine
    drawbars you can automate, percussion, scanner vibrato and chorus, key
    click that follows how hard you play, leakage and a preamp drive.
  • Rotary Speaker, a new effect: a treble horn and a bass drum turning
    in front of two microphones. Switch SPEED between STOP, SLOW and FAST
    and the horn follows in a second while the drum takes four or five.
  • Tune no longer roughens a voice. A tuned voice kept a gritty,
    bad-microphone edge in its upper harmonics; it now sounds as clean as
    the take (harmonics-to-noise at or above the source's on speech, from
    up to 2.6 dB below). Analysing a take for Tune takes about a third
    longer the first time.
  • Tune moves a voice's formants. The tune row's new FORM control
    (±12 semitones) shifts a tuned clip's resonances without changing its
    pitch: up for a thinner, synthetic voice, down for a darker one.
    slabkit: audio(…, tune=…, formant=3).
  • Add an experimental sound-matching dataset generator with paired Slab
    projects, correction labels, generation timing and disk-space guards,
    plus local correction-model training, controlled ablations, auraloss-guided
    parameter refinement and a local web app for fast blind listening labels.

Apple Silicon, macOS 13 or later. Built from v0.0.24, which is its complete source (GPL-3.0-or-later, see COPYING.md).

Install:

curl -fsSL https://github.com/nooga/slab/releases/latest/download/install.sh | bash

Or with Homebrew: brew install --cask nooga/tap/slab

Or open the DMG and drag Slab to Applications. It is not notarized, so the first launch needs System Settings > Privacy & Security > Open Anyway.

Slab 0.0.23

Choose a tag to compare

@nooga nooga released this 04 Nov 19:55
v0.0.23
472e5b4
  • Notes don't get stuck. A note no longer hangs when you edit a clip
    while it plays (deleting, adding, moving, retuning or shortening notes
    under the playhead), when the arpeggiator is switched on or off, added or
    removed mid-note, when a key is held through a stop, when the editor
    moves to another track while a key sounds, or in a rack lane playing
    two keys. A seek or a loop ends the arpeggiator's notes too.
  • Stopped, a note rings out. A note played with the transport stopped
    sounds until its tail has died away, instead of cutting off three
    seconds after the key went up, and a track that sends to a bus (a send
    reverb, a group) is heard through it. Something that never dies away
    (a drone) fades out after 30 seconds and doesn't come back on the next
    play.

Apple Silicon, macOS 13 or later. Built from v0.0.23, which is its complete source (GPL-3.0-or-later, see COPYING.md).

Install:

curl -fsSL https://github.com/nooga/slab/releases/latest/download/install.sh | bash

Or with Homebrew: brew install --cask nooga/tap/slab

Or open the DMG and drag Slab to Applications. It is not notarized, so the first launch needs System Settings > Privacy & Security > Open Anyway.

Slab 0.0.22

Choose a tag to compare

@nooga nooga released this 02 Nov 19:40
v0.0.22
8e9529b
  • CONVO, a convolution reverb. Play a track through a recorded or made
    space: an impulse response, any WAV. It ships with a synthetic stereo
    hall and a bowed cymbal that every note swells through, and takes
    PREDELAY, LO CUT, HI CUT, WIDTH, LEVEL and MIX. Effect machines can ask
    for an impulse response of their own (docs/49).

  • Unison can be a wall. The UNI panel has a WALL switch. On, a stack
    gets louder as voices are added (about +6 dB at 5) instead of staying at
    one voice's level, and its voices spread across the stereo field in
    pitch order, so the channels beat apart and the stack sounds wider.
    Off by default; existing projects sound the same.

  • Menus scroll. A menu or submenu taller than the window (a bank of
    128 presets) scrolls with the wheel, the arrow keys and PgUp/PgDn, with ▴ and ▾
    marking more rows; the rows per menu went from 72 to 256.

  • Ambika. A new instrument after Mutable Instruments' six-voice polysynth,
    ported from its firmware: two digital oscillators with 38 shapes (the CZ
    family, FM, vowel, 16 wavetables), a mixer with sync, ring, xor, fold and
    bit cross-modulation, a sub-oscillator or transient, noise, fuzz and a
    sample-rate crusher, then a four-pole filter, three envelopes, four LFOs
    and the 14-slot modulation matrix with four modifiers. Values are the
    hardware's. It ships with ten presets of ours and the 358 programs of the
    unit's golden card. The SVF board's band- and high-pass and tempo-synced
    LFOs are not in yet (docs/48).


Apple Silicon, macOS 13 or later. Built from v0.0.22, which is its complete source (GPL-3.0-or-later, see COPYING.md).

Install:

curl -fsSL https://github.com/nooga/slab/releases/latest/download/install.sh | bash

Or with Homebrew: brew install --cask nooga/tap/slab

Or open the DMG and drag Slab to Applications. It is not notarized, so the first launch needs System Settings > Privacy & Security > Open Anyway.

Slab 0.0.21

Choose a tag to compare

@nooga nooga released this 02 Nov 17:41
v0.0.21
c22998e
  • MP3 export. The Export sheet's FORMAT has MP3 at 128, 192, 256 or 320
    kb/s (44.1 or 48 kHz), with title, artist, album, year and BPM tags, for
    the mix and for stems. From the command line, --render out.mp3 --kbps 192.
    It's built in: nothing to install.
  • Exports, bounces and freezes no longer freeze the window. Starting one
    while Slab is still analyzing audio used to block everything until the
    analysis finished; now the window keeps drawing ("Analyzing sources…") and
    the export starts by itself. A render that stops advancing is reported in
    the status line and in slab.log, and quitting no longer waits forever for
    it: the project is saved for recovery and Slab exits after five seconds. A
    failed export setup can no longer leave the Export sheet busy for good.
    slab.log now also records the GPU, the display's scale, and a note when
    the window stops drawing, for reports of freezes and misdrawn screens.

Apple Silicon, macOS 13 or later. Built from v0.0.21, which is its complete source (GPL-3.0-or-later, see COPYING.md).

Install:

curl -fsSL https://github.com/nooga/slab/releases/latest/download/install.sh | bash

Or with Homebrew: brew install --cask nooga/tap/slab

Or open the DMG and drag Slab to Applications. It is not notarized, so the first launch needs System Settings > Privacy & Security > Open Anyway.

Slab 0.0.20

Choose a tag to compare

@nooga nooga released this 02 Nov 13:00
v0.0.20
9679a22
  • Updates from GitHub. Slab checks for a newer release when it starts and
    turns the SLAB logo into an UPDATE offer. In Slab.app, UPDATE downloads the
    release, checks it and swaps it in on a restart; Homebrew installs get EXIT &
    UPGRADE, which quits, runs brew upgrade and reopens Slab. SKIP passes on a
    version, a switch turns the check off, and About has an UPDATES button to
    check now. (Updates are offered from 0.0.20 on: earlier versions can't check.)

Apple Silicon, macOS 13 or later. Built from v0.0.20, which is its complete source (GPL-3.0-or-later, see COPYING.md).

Install:

curl -fsSL https://github.com/nooga/slab/releases/latest/download/install.sh | bash

Or with Homebrew: brew install --cask nooga/tap/slab

Or open the DMG and drag Slab to Applications. It is not notarized, so the first launch needs System Settings > Privacy & Security > Open Anyway.

Slab 0.0.19

Choose a tag to compare

@nooga nooga released this 01 Nov 17:17
v0.0.19
9e6dcf7
  • Drum lanes you can read. On a kit the piano roll's key column widens to
    fit the lane names, and the key button cycles ALL KEYS, KIT KEYS and CLIP
    KEYS, which shows only the lanes the clip has notes on, top aligned. Kits
    open on KIT KEYS.

  • Clips show their notes at a readable size. A clip on a track draws its
    notes over its own pitch range instead of a fixed one, so low notes no
    longer squash into a line.

  • Metronome. CLICK on the transport bar clicks on every beat while
    playing, with a slider for its level. It follows the meter, including odd
    and changing ones: the downbeat and each group start are accented. It is
    heard live only: never in bounces or renders, and not through master effects.

  • A tidier transport bar. AUTO moved into the input menu (the caret beside
    REC, which lights red while automation recording is armed). KEYS and LEARN
    are single buttons that open into their controls only when on. On a narrow
    window the bar gives up the stats, then the master meter's width, the song
    length and those buttons, in that order, instead of cutting off its right end.


Apple Silicon, macOS 13 or later. Built from v0.0.19, which is its complete source (GPL-3.0-or-later, see COPYING.md).

Install:

curl -fsSL https://github.com/nooga/slab/releases/latest/download/install.sh | bash

Or with Homebrew: brew install --cask nooga/tap/slab

Or open the DMG and drag Slab to Applications. It is not notarized, so the first launch needs System Settings > Privacy & Security > Open Anyway.

Slab 0.0.18

Choose a tag to compare

@nooga nooga released this 01 Nov 14:25
v0.0.18
a794af5
  • Song length and a time readout. The transport bar shows the song's
    length in minutes and seconds next to the position (tempo changes and
    ramps counted, up to the END marker or else the last clip). Click the
    position to switch it between bar.beat.sub and minutes:seconds.
  • Overlapping clips are marked, and ⌘T trims them. Where a clip lies
    over another on a track, a hatched strip along its foot shows the stretch
    it covers. ⌘T (or "Trim overlaps" in the clip menu) cuts the clips on the
    tracks you have selected so none overlap: the one on top keeps its
    stretch, and a clip lying wholly under another goes.
  • Velocity stems of a chord are separate. In the piano roll's velocity
    lane the notes of a chord used to sit on one line, and only the topmost
    could be grabbed (anywhere along its whole length). Now they fan out side
    by side where there is room, and where there is not, the lowest draws in
    front; a click picks the stem whose cap is nearest the pointer, and only
    the stem itself is a target.
  • Box select scrolls. Drag a box on the tracks or in the piano roll to
    the edge of the view and it scrolls along (faster the
    further out), so you can select past what is on screen.
  • Pinch to zoom. On a trackpad, pinching zooms time around the pointer
    in the arrangement, the piano roll and the audio editor; ⌥-pinch sizes
    the piano roll's rows.

Apple Silicon, macOS 13 or later. Built from v0.0.18, which is its complete source (GPL-3.0-or-later, see COPYING.md).

Install:

curl -fsSL https://github.com/nooga/slab/releases/latest/download/install.sh | bash

Or with Homebrew: brew install --cask nooga/tap/slab

Or open the DMG and drag Slab to Applications. It is not notarized, so the first launch needs System Settings > Privacy & Security > Open Anyway.

Slab 0.0.17

Choose a tag to compare

@nooga nooga released this 01 Nov 13:09
v0.0.17
9f7601c
  • Your work survives a crash. Slab saves a recovery copy of the project
    every 30 seconds while it has unsaved changes, the untitled project
    included, and restores it at the next start (docs/46).
  • Logs and crash reports. Slab keeps ~/Library/Logs/Slab/slab.log and
    writes a crash-*.txt with a backtrace when it crashes; send that folder
    with a bug report (docs/46).
  • Undo and redo are fast. They used to rebuild every machine in the
    project and could stall for seconds; now only the tracks an edit touched
    are rebuilt, and your track and clip selection stays.
  • Moving several clips keeps their layout. A selection dragged to other
    tracks shifts as a whole (it stops at the first or last track instead of
    squashing), and a ghost of each clip shows where it will land. Box-selecting
    on the tracks also selects the automation points inside the box, and
    selected points move together with clips or with each other, across lanes.
  • The machine menu is A to Z with marks. "+" and the replace menu list
    every machine alphabetically, racks included, with a mark for instruments,
    effects and presets (and the arpeggiator).

Apple Silicon, macOS 13 or later. Built from v0.0.17, which is its complete source (GPL-3.0-or-later, see COPYING.md).

Install:

curl -fsSL https://github.com/nooga/slab/releases/latest/download/install.sh | bash

Or with Homebrew: brew install --cask nooga/tap/slab

Or open the DMG and drag Slab to Applications. It is not notarized, so the first launch needs System Settings > Privacy & Security > Open Anyway.

Slab 0.0.16

Choose a tag to compare

@nooga nooga released this 31 Oct 23:04
v0.0.16
a513b2a
  • An arpeggiator, in a new note slot. Every instrument track can take
    a note machine ahead of its instrument: "+" in the machine bay, then
    ARPEGGIATOR. Nine modes, rates from 1/4 to 1/32 with dotted and triplet
    values, 1 to 4 octaves, gate, swing, humanize, accent, latch and a
    16-step rest/note/accent/tie pattern. It arpeggiates clips, KEYS and a
    MIDI keyboard, locked to the song's beat, and is saved in the project
    (docs/45).
  • MIDI keyboards and pads. Plug in a MIDI device and it plays the
    selected track at its own velocity, and REC records it into a clip,
    with or without KEYS on. LEARN on the transport bar binds a knob to the
    control you last touched, a pad to PLAY/STOP, STOP, REC, LOOP, track
    or knob-page steps, or a knob to one of the eight knob slots, which
    drive the selected instrument's controls a page at a time. An Akai MPK
    mini 3 works out of the box (docs/44).
  • A loudness stage for the master. The FX Rack has a new master-loud
    preset: glue compression, a diode clip that rounds off the peaks, and a
    limiter, behind four macros. LOUD drives the clip and the limiter
    together, so the mix gets denser instead of just hotter: on neon_tide it
    takes -13 LUFS to -11 at the default, -9 at 0.8 and -8 at full, with the
    peak-to-average gap falling from 15 dB to 11. GLUE, CLIP and CEIL
    trim it. Put it last on the master.
  • The machine menu shows every machine again. The "+" and replace
    menus stopped at 40 rows, so FX Rack, Rack and the newest effects (the
    harsh pack) were cut off the end. The cap is 72, and "+" on the master
    lists effects only. Dropping an effect or rack preset from the browser
    onto the machine bay while the master is selected now lands on the
    master chain, not the first track. In the mixer, dropping a preset on a
    strip (a track, a bus or the master) loads it there.

Apple Silicon, macOS 13 or later. Built from v0.0.16, which is its complete source (GPL-3.0-or-later, see COPYING.md).

Install:

curl -fsSL https://github.com/nooga/slab/releases/latest/download/install.sh | bash

Or with Homebrew: brew install --cask nooga/tap/slab

Or open the DMG and drag Slab to Applications. It is not notarized, so the first launch needs System Settings > Privacy & Security > Open Anyway.

Slab 0.0.15

Choose a tag to compare

@nooga nooga released this 22 Oct 13:34
v0.0.15
c98582d
  • The SM-24 Mono has a patch panel. Its new PATCH page holds four
    cords. Drag a jack from the dock onto a ringed knob (LPF CUT, HPF CUT,
    PW, VCO2 PITCH, LVL, MG FREQ), or pick SRC and DEST on a cord row. The
    jacks are FENV, AENV and AENV inverted, MG, MG PUL, S&H, NOISE, KBD, VEL,
    PRESS, VCO1, VCO2 and VCA OUT. The cords run at audio rate, so VCO2 can
    FM the cutoff and the output can feed back into the filter. A patch
    with no cords sounds exactly as before. Five new patches show it off
    (patch-*), with the demo songs/ms20_patch_bay.py.

  • Squelch 33, an acid bassline synth. A new mono machine built on the
    HOT/WET filter the SM-24 Mono used to have: one SAW or SQR oscillator,
    CUT, RES, ENV MOD, DECAY, ACCENT and SLIDE. Loud notes (the ! in a
    slabkit seq) are accented: louder, brighter, and a run of them climbs
    higher with RES up. Overlapping notes slide. Presets: classic-squelch,
    square-bounce, wet-scream, round-line; demo songs/squelch_acid.py.

  • SM-24 Mono sounds like an MS-20. Its LPF MODE gains K35 and
    OTA, the early and late MS-20 filters. Bass stays full at any PEAK,
    the peak sits on CUT, and both the HPF and LPF resonate up to
    self-oscillation. K35 is the default: grittier and lopsided when driven.
    OTA is cleaner and sings. HOT and WET are still there for the acid
    sound. New presets: k35-scream, k35-round-bass, ota-singing-lead.
    A new SM-24 starts from a re-voiced init patch; saved songs and presets
    keep their mode and sound as before.

  • A harsh effects pack (docs/43).

    • Octaver gives one and two octaves down the way analog divider
      pedals do, with a GLITCH knob to make it chatter, plus an
      Octavia-style octave-up fuzz.
    • Wobble is a filter or wah swept by a synced LFO, a 16-step
      sequence, the playing's envelope (auto-wah) or a pedal, and doubles
      as a tremolo or gate.
    • Folder is an anti-aliased wavefolder.
    • Grinder stacks ten distortion curves up to four deep, from a
      rounded overdrive to a dead zone, with sizzle, bass-driven flux and
      phase distortion.
  • Harsh rigs. Twelve FX Racks under harsh/, among them Wobble
    Oktaver, the distortion-chorus-distortion Sandwich, Octavia Portal,
    Kodiak (big, gnarly bass), Cross Bass (Justice-style) and Four Slot.
    songs/kodiak_club.py is a demo built from them.

  • OTT and Supercharge. Multi's RATIO now reaches 100 and its UP 4:1,
    with an OTT preset; Char has a Supercharge preset.

  • Chorus can choke. FEEDBACK, WET HP and INVERT go past the Juno:
    inverted at half mix, it hollows out a distorted bass for a second
    distortion to bring back. Existing chorus settings sound the same.

  • Building from source needs Zig 0.17. 0.16 no longer builds Slab,
    and 0.17 no longer fails on the build script (#3).

  • Rigs. Rack and FX Rack sit under a RACKS heading in the machine
    picker, with factory rigs in their preset menus: Fretwire Clean Rig and
    Crunch Rig, Bass DI + Amp, and Parallel Squash (an FX Rack). A rig
    opens folded to its named macro knobs; the fold button shows the lanes.
    The old split and layer racks are rewritten as lanes.

  • Group into a rack. Shift-click devices in the bay to select a run,
    then ⌘G moves them into a new Rack (or FX Rack) with their settings and
    automation; ⌘⇧G on a one-lane rack takes them back out. ⌘G still groups
    tracks when no devices are selected.

  • Rack panel. KEY, VEL and CHAIN tabs edit each lane's zones as bars,
    inserts reorder by dragging their title strip, MAP outlines every
    control it can map, and turning a mapped control by hand moves its
    macro.

  • Automate inside a rack. Controls of the machines in a rack's lanes
    now get automation lanes, named with the machine (AMP2 GAIN), and
    they keep working when lanes or inserts move. Files write them as
    paths such as fx1/2.1:amp-gain (docs/22).

  • slabkit builds racks. rack(), .lane(), .macro() and .map()
    make racks in Python, song.track("Bass", "rack", "bass-di-amp") loads
    a rig, and slab --describe lists Rack and FX Rack with their macros.
    songs/rack_rigs.py is a demo.

  • Rack macros. Racks and FX Racks get eight macro knobs (rk-m1…rk-m8)
    and a CHAIN control that automate like any knob. MAP, then click a
    control inside the open lane (or a lane's LV or PN), puts it on the
    picked macro; each mapping has a MIN and MAX in the control's own units
    and an optional formula such as x^2 or x * (1 - m4). A macro can
    drive a rack nested inside. Mapped controls light their automation LED
    and follow the macro smoothly, and macros save with the rack's presets.

  • Headless renders play Racks. slab --render and --stems rendered
    a track with a Rack on it as silence; they now load it as the app does.

  • Rack lanes take effects, and there's an FX Rack. Each lane of a Rack
    now holds a chain: its instrument and up to 16 inserts, shown beside the
    lane list the way the bay shows a track's, each with its own preset
    menu, bypass, replace and remove, and + to add one. The new FX Rack goes in an effect slot and runs its
    lanes in parallel on the track's signal; an empty lane is the dry path.
    Lanes get SOLO, racks fit inside racks three deep, and a lane with a
    latent insert no longer smears against the others: the rack lines them
    up and reports the latency. Old racks open and sound as before
    (docs/42).

  • Hammerwork Grand, a physically modeled piano. Felt hammers strike up
    to three detuned strings per key, which ring into a soundboard through
    a moving bridge. Velocity changes the tone the way a real hammer does,
    bass and treble keep their own inharmonicity and decay, and the
    unisons give the piano's two-stage decay. PEDAL lifts the dampers on
    held notes too. Six presets. See docs/41.

  • Skinwork Kit, a physically modeled drum kit. Kick, snare with
    rattling wires, side stick, three toms, closed, pedal and open hats,
    crash, ride and ride bell on the GM drum map. Toms and kick drop in
    pitch when hit hard, cymbals bloom into a wash, and a closed hat chokes
    an open one. Five presets. See docs/41.

  • Fretwire gets pickups, wiring and bodies. The bass and guitar have
    a second page. Choose the neck pickup, the bridge pickup, both, or both
    out of phase. Pick single coil, P-90, humbucker or split coil, and set
    how close the magnets sit. Real tone and volume pots roll the tone into
    the mids and clean up an amp's drive. The strings now share a body,
    SOLID, SEMI, HOLLOW or ACOUSTIC, that colors their decay and can be
    miked (AIR). There is also an under-saddle piezo, and open strings that
    ring in sympathy. New presets include twin-humbucker, p90-crunch,
    semi-hollow, out-of-phase and acoustic guitars, and jazz-both, p-bass,
    hollow and acoustic basses. Saved bass and guitar parts now sound
    slightly different on the default solid body's dead spots; set COUPLE
    to 0 for the old sound. See docs/41.

  • Separate STOP and PLAY. Pressing STOP again while stopped returns
    to the loop's start, or to the song's start with the loop off.

  • Musical typing. Turn on KEYS in the transport bar to play the
    selected track from the computer keyboard. PIANO is one chromatic row.
    GRID is four rows in fourths like a Push, in key when a scale is set.
    CHORD plays in-key chords on the bottom row under a melody on the rows
    above it. With KEYS on, REC records what you play into the open clip
    or a new one, layering pass after pass on a loop (docs/40).

  • Octaves and scale in the piano roll. A pressed key lights the same
    note faintly in every octave on the keys and the grid. In DRAW mode a
    ghost shows the note a click would add, with outlines in its other
    octaves. A picked scale now marks its keys with a stripe (solid on the
    root), greys the keys outside it, and tints its rows in the track's
    color.

  • New Project no longer crashes while a reverb rings. Starting a new
    project, or opening one, while the old project's master effects were
    still sounding could crash Slab.

  • Juniper-8, a Roland Jupiter-8. Eight voices of two VCOs with
    exponential cross mod, VCO-2 synced to VCO-1, and PWM on both pulses. A
    6 dB HPF feeds the IR3109 filter, with 24 dB and its thinner 12 dB tap.
    Two envelopes with key follow and an inverting ENV-1, and one LFO
    shared by every voice, with delay. It ships with all 64 of Roland's
    factory patches, read off the original patch sheets. See docs/39.

  • C-Beam 80 ships every CS-80 factory preset. All 22 of Yamaha's
    presets as their Channel I + II pairings (STRING 3/4, CLAVICHORD, ORGAN,
    GUITAR and FUNKY 1-4 are new), and the Owner's Manual's ten programming
    examples, clarinet to timpani, under manual/. The presets it shipped
    with read the charts about 13 % low; they now match them.

  • Verb's rooms and halls can turn dense right away. A new DENSITY
    switch sets VELVET, which scatters every echo inside the reverb's loop
    [a velvet feedback matrix, Schlecht and Habets 2020]. A hall with no
    input diffusion becomes a smooth wash about three times sooner (64 ms
    instead of 190), with no flutter and DECAY still accurate. New presets
    velvet-hall and velvet-room. CLASSIC, the default, sounds exactly
    as before.


Apple Silicon, macOS 13 or later. Built from v0.0.15, which is its complete source (GPL-3.0-or-later, see COPYING.md).

Install:

curl -fsSL https://github.com/nooga/slab/releases/latest/download/install.sh | bash

Or with Homebrew: brew install --cask nooga/tap/slab

Or open the DMG and drag Slab to Applications. It is not notarized, so the first launch needs System Settings > Privacy & Security > Open Anyway.