Computer Engineering student focused on low-level embedded systems development.

I work close to the hardware, building systems from the ground up using C and assembly, interacting directly with microcontroller registers, interrupts, and peripherals.

My focus is not frameworks or abstractions — it is understanding how systems actually behave at the hardware level.

• Bare-metal firmware development
• Register-level peripheral control
• Interrupt-driven system design
• DMA-based data handling
• Real-time system behavior
• Hardware/software interaction
• Debugging using hardware tools (debugger, oscilloscope, logic analyzer)

• C (primary)
• C++
• Assembly (ARM / AVR / PIC)

• AVR (ATmega328P)
• ARM Cortex-M (STM32F4 series)
• PIC16F887

• UART
• SPI
• I2C
• PWM
• ADC
• DMA
• NVIC / Interrupt systems

• Git / GitHub
• STM32CubeIDE / GCC toolchain
• MPLAB X IDE (PIC development)
• Debugging via SWD / JTAG / ICD
• Oscilloscope & Logic Analyzer

• CPU registers and instruction execution
• Stack operations and function call behavior
• Interrupt entry and exit sequences
• Memory-mapped I/O access
• Bit-level manipulation and control
• Understanding compiler-generated behavior

• Register-level GPIO control (TRIS, PORT, LAT)
• Timer modules (Timer0, Timer1)
• Interrupt handling (INTCON and peripheral interrupts)
• ADC configuration and usage
• Peripheral interfacing and timing control
• Understanding of 8-bit microcontroller architecture

• Memory organization (Flash, SRAM, stack)
• Interrupt vector tables and handling
• Clock configuration and system timing
• Peripheral register mapping
• Boot process of microcontrollers
• Deterministic execution in embedded systems

• GPIO, Timers, Interrupts, ADC, UART
• Direct register programming
• Completed multiple hardware-based projects

• NVIC, DMA, peripherals at register level
• Driver development without HAL dependency
• FreeRTOS integration
• Real-time system design

• Deeper RTOS concepts
• Embedded Linux fundamentals
• PCB design and hardware integration
• Advanced communication protocols and system design

To become a strong embedded systems engineer capable of designing and implementing reliable, efficient, and real-time hardware-software systems from scratch.