An RP2350 microcontroller video game harness.
- resetcoms 0.1 - send reboot command to all com ports with path "USB\VID_2E8"
this document - https://github.com/nitrologic/vidbit
◎ ◎
◎ ◎
◎ ◎
6 4 2 1 3 5
| pin | GPIO | name |
|---|---|---|
| 1 | GP0 | +Data |
| 2 | GP2 | rx0 |
| 3 | GND | |
| 4 | VCC | |
| 5 | GP1 | +Clock |
| 6 | GP3 | tx0 |
◎ ◎ ◎ ◎ ◎
◎ ◎ ◎ ◎
1 2 3 4 5
6 7 8 9
| pin | name |
|---|---|
| 1 | Up |
| 2 | Down |
| 3 | |
| 4 | |
| 5 | Paddle B |
| 6 | Paddle A |
| 7 | VCC |
| 8 | GND |
| 9 | Button |
"rect":"▪▫■□▢▣",
"hatched":"▤▥▦▧▨▩",
"pointChars":"◯⊙⊚⦾⦿◉◎◍❂○●◦◌",
"starChars":"✩✪✫✬✭✮✯✰✱✲✳✴✵✶✷✸✹✺✻✼✽✾✿❀❁",
"circles":"◐◒◑◓◔◕",
"markdown":"↩↪↗↘↖↙◀▶✳✴",
"square":"🔳🔲✅❎",
"upper": "𝙰𝙱𝙲𝙳𝙴𝙵𝙶𝙷𝙸𝙹𝙺𝙻𝙼𝙽𝙾𝙿𝚀𝚁𝚂𝚃𝚄𝚅𝚆𝚇𝚈𝚉" "lower": "𝚊𝚋𝚌𝚍𝚎𝚏𝚐𝚑𝚒𝚓𝚔𝚕𝚖𝚗𝚘𝚙𝚚𝚛𝚜𝚝𝚞𝚟𝚠𝚡𝚢𝚣" "digits": "𝟶𝟷𝟸𝟹𝟺𝟻𝟼𝟽𝟾𝟿"
import unicodedata clean = unicodedata.normalize("NFKC", "𝟶𝟷𝟸𝟹") # → "0123"