Stars
altium-monkey is a Python toolkit for reading, writing, analyzing, and rendering Altium files directly from automation.
Turn any Icom transceiver into a web-accessible station. Headless wfview fork with browser-based control, audio streaming, SSB, FreeDV, AX.25, CW, JS8 and FT8.
MR-DOS / LowCapacitanceProbe
Forked from makerprobe/FETProbe_V21+ GHz AC Probe with low input capacitance
A tool to visualize differences of two PCB patterns created by KiCad
The Belfry OpenScad Library, v2.0. An OpenSCAD library of shapes, masks, and manipulators to make working with OpenSCAD easier. BETA
A modern web-based satellite tracking application designed for amateur radio operators and satellite enthusiasts. Zenith provides real-time satellite tracking, pass predictions, and radio integrati…
BLE Manager - Focus on Hardware, We've Got the Interface
Remotely open audio channels and a serial port to an Icom RS-BA1 server (for ex. Icom IC-705 transceiver).
G-code generator for 3D printers (RepRap, Makerbot, Ultimaker etc.)
APRS Software project device support LILYGO T-TWR Plus.
Control the Elecraft tuner T1 with an ESP32, which connects to the ICOM IC-705 via bluetooth
Unofficial Maker Faire badge which is also full development board based on ESP32-S2 module.
Hardware design files for Raspberry Pi 2/3/4 shortwave receiver
CH32V003 is an ultra-cheap RISC-V MCU with 2KB SRAM, 16KB flash, and up to 18 GPIOs that sells for under $0.10
A few standalones demodulators replacing GNU Radio flowcharts
🥧 A SDR Linux Distro for the Raspberry Pi and other SBC. Compatible out of the box with multiple SDR.
Firmware for the Magnetic Loop Congroller, as described here: https://sites.google.com/site/lofturj/to-automatically-tune-a-magnetic-loop-antenna