A modern PL/M-80 compiler targeting Zilog Z80 assembly language.

PL/M-80 was the primary systems programming language for CP/M and other 8080/Z80 operating systems. This compiler can rebuild original CP/M utilities from their PL/M source code.

Repository: https://github.com/avwohl/uplm80

• Full PL/M-80 language support
• Targets Z80 instruction
• Multi-file compilation with cross-module optimization
• Multiple optimization passes (peephole, post-assembly tail merging)
• Generates relocatable object files compatible with standard CP/M linkers
• Produces code competitive with the original Digital Research compiler

Compiled output is comparable to the original Digital Research PL/M-80 compiler:

Quick install from PyPI:

pip install uplm80 um80 upeepz80

Platform-specific guides:

• Raspberry Pi: See README_RASPBERRY_PI.md
• General/Development: See INSTALL.md

Or install from source:

git clone https://github.com/avwohl/uplm80.git
cd uplm80
pip install -e .

uplm80 input.plm -o output.mac

Or run as a module:

python -m uplm80.compiler input.plm -o output.mac

Options:

• -m cpm or -m bare - Runtime mode (default: cpm)
  • cpm: For new PL/M programs, maximum stack under BDOS
  • bare: Original Digital Research compatible (jump to start-3)
• -o output.mac - Output file name
• -O 0|1|2|3 - Optimization level (default: 2)
• -D SYMBOL - Define conditional compilation symbol (can be repeated)

Compile multiple source files together for optimal cross-module optimization:

uplm80 main.plm helper.plm library.plm -o output.mac

When multiple files are provided:

• All files are parsed together before code generation
• A unified call graph is built across all modules
• Local variable storage (??AUTO) is optimally allocated based on which procedures can be active simultaneously across module boundaries
• A single combined output file is generated

This produces better code than compiling files separately, as the compiler can share local variable storage between procedures in different modules that never call each other.

Use your preferred Z80 assembler and linker. Example with um80/ul80:

um80 output.mac                              # Assemble to .rel
ul80 -o program.com output.rel runtime.rel   # Link to CP/M .com

PL/M-80 is a typed systems programming language with:

• Data types: BYTE (8-bit), ADDRESS (16-bit)
• Variables: Scalars, arrays, structures, BASED variables (pointers)
• Control flow: DO/END, DO WHILE, DO CASE, IF/THEN/ELSE
• Procedures: With parameters, local variables, recursion
• Built-in functions: HIGH, LOW, DOUBLE, SHL, SHR, ROL, ROR, etc.
• I/O: INPUT, OUTPUT for port access

Example:

hello: DO;
    DECLARE message DATA ('Hello, World!$');
    DECLARE i BYTE;

    print: PROCEDURE(addr) PUBLIC;
        DECLARE addr ADDRESS;
        /* CP/M BDOS print string */
        CALL mon1(9, addr);
    END print;

    CALL print(.message);
END hello;

See examples/hellocpm.plm for a complete working example. A drop-in Makefile that drives the full uplm80 → um80 → ul80 pipeline (with optional ud80/ux80 disassembly targets) is available at docs/example.Makefile — contributed by Martin Homuth-Rosemann (@Ho-Ro, issue #5).

For more on CP/M BDOS usage, see docs/BDOS_REFERENCE.md.

PL/M-80 v4.0 added conditional compilation. The directives are control lines — a leading $ at the left margin (column 1), exactly like $INCLUDE and $TITLE — so the same source can target different configurations (e.g., CP/M 2.2 vs CP/M 3, single-user vs MP/M). No enabling directive is required.

A comment-wrapped form (/** $if NAME **/) is also accepted for CP/M-3-style sources that embed the same directives in comment syntax.

$set (CPM3)
DECLARE
$if CPM3
    VERSION LITERALLY '30H',
$else
    VERSION LITERALLY '22H',
$endif
    MAXFILES BYTE;

Symbols can also be defined from the command line:

uplm80 pip.plm -D CPM3 -D MPM -o pip.mac

The compiler generates calls to these runtime routines (provide in a separate .rel file):

The first 100H bytes of a CP/M program's memory are reserved by the operating system (zero page, default FCB, default DMA buffer). All CP/M .COM programs load at address 100H, so a CP/M binary's contents start at offset 0 of the file — the linker takes care of relocating to 100H. PL/M source files should not declare 100H: themselves; doing so causes the assembler to emit a cseg org 100H, which the linker then honors by padding the binary with 256 zero bytes from 0–FFH. See the bare mode notes below for the one situation where a leading address constant is meaningful.

The mode to use for new PL/M-80 programs. The compiler emits a small entry preamble that takes maximum stack space under BDOS and returns cleanly to CP/M:

• The compiler emits the entry code at the start of the .com image — do not write 0100H: in your source. The linker (ul80) defaults to origin 100H, which is what CP/M wants.

• Entry preamble (auto-generated):

  ld   hl,(6)       ; load BDOS base from address 6
  ld   sp,hl        ; stack grows down from just below BDOS
  call MAIN         ; run your main procedure
  jp   0            ; warm-boot return to CP/M when MAIN returns

• Stack: maximum available — everything between program end and BDOS.

• Requires CP/M stubs in your runtime: MON1, MON2, MON3, BOOT.

• System variables: BDISK, MAXB, FCB, BUFF, IOBYTE.

The mode required to rebuild original Digital Research utilities (PIP.PLM, ED.PLM, etc.) byte-compatibly. These programs follow the Intel PL/M-80 convention of jumping to start − 3 to skip over a local stack area:

• Entry preamble (auto-generated):

  jp   ??START      ; skip over the stack buffer
  ds   64           ; 64-byte local stack
  ??STACK:          ; top of stack
  ??START:
  ld   sp,??STACK   ; use the local stack
  jp   MAIN         ; jump (not call) into MAIN

• The program controls its own exit — no automatic warm boot. Original DR utilities reboot or chain by writing to memory directly.

• Custom entry points: because the entry preamble lives in the first few bytes of the image, original programs sometimes prepend a DECLARE … DATA(...) block to forge a different jump (see PIP.PLM, which fakes a JMP table at page 1). In bare mode the leading address constant (e.g. 0100H: or 0200H:) is meaningful — it sets the assembler org for the bare image.

• Compatible with original Intel/DR PL/M-80 sources.

uplm80/
├── compiler.py      # Main compiler driver / CLI
├── frontend.py      # plox-driven lexer + LR parse → AST
├── preprocess.py    # PL/M preprocessor ($INCLUDE, $if, LITERALLY, ...)
├── ast_nodes.py     # AST definitions
├── ast_optimizer.py # AST-level optimizations
├── codegen.py       # Z80 code generator
├── runtime.py       # Runtime helpers
├── symbols.py       # Symbol table
├── errors.py        # Diagnostic exception types
└── data/            # Pre-built plox grammar bundle (plm_full.json)

Peephole optimization is provided by the external upeepz80 package; the front-end is generated from plox grammars (plm_pre + plm_full) and loaded at import time from the JSON bundle in data/.

This project is licensed under the GNU General Public License v3.0 or later - see the LICENSE file for details.

Contributions are welcome! Please feel free to submit issues and pull requests.

• 80un - Unpacker for CP/M compression and archive formats (LBR, ARC, squeeze, crunch, CrLZH)
• cpmdroid - Z80/CP/M emulator for Android with RomWBW HBIOS compatibility and VT100 terminal
• cpmemu - CP/M 2.2 emulator with Z80/8080 CPU emulation and BDOS/BIOS translation to Unix filesystem
• ioscpm - Z80/CP/M emulator for iOS and macOS with RomWBW HBIOS compatibility
• learn-ada-z80 - Ada programming examples for the uada80 compiler targeting Z80/CP/M
• mbasic - Modern MBASIC 5.21 Interpreter & Compilers
• mbasic2025 - MBASIC 5.21 source code reconstruction - byte-for-byte match with original binary
• mbasicc - C++ implementation of MBASIC 5.21
• mbasicc_web - WebAssembly MBASIC 5.21
• mpm2 - MP/M II multi-user CP/M emulator with SSH terminal access and SFTP file transfer
• romwbw_emu - Hardware-level Z80 emulator for RomWBW with 512KB ROM + 512KB RAM banking and HBIOS support
• scelbal - SCELBAL BASIC interpreter - 8008 to 8080 translation
• uada80 - Ada compiler targeting Z80 processor and CP/M 2.2 operating system
• uc80 - ANSI C compiler targeting Z80 processor and CP/M 2.2 operating system
• ucow - Unix/Linux Cowgol to Z80 compiler
• um80_and_friends - Microsoft MACRO-80 compatible toolchain for Linux: assembler, linker, librarian, disassembler
• upeepz80 - Universal peephole optimizer for Z80 compilers
• uplox - Compiler front-end generator (lexer DFA + LR parser + typed auto-AST) that uplm80 uses for PL/M-80 parsing
• z80cpmw - Z80 CP/M emulator for Windows (RomWBW)