Check if two or more network subnets are overlapping.
Requires Python 3.11 or newer.
uv tool install ipconflict(or run it once withuvx ipconflict ...)pip install ipconflict
ipconflict 10.0.0.0/22 10.0.1.0/24ipconflict 10.0.0.0/22 10.0.1.1-10.0.1.5ipconflict 172.16.0.0/22 172.16.1.0/24 172.16.3.0/27
ipconflict -p 10.0.0.0/24 10.0.0.100-10.0.0.105
ipconflict -f /path/to/subnets
echo "10.0.1.0/24 10.0.0.0/22" | ipconflict -i
echo "10.0.0.0/16" | ipconflict -i -f /path/to/subnets 192.168.0.0/24 172.25.1.17
A subnet can be specified in several ways:
- CIDR notation
192.168.0.0/24 - Single IP address
10.0.1.2 - IP range
10.0.0.5-10.0.0.20
This tool works both with IPv4 and IPv6.
0, one or more conflicts found1, no conflict found2, aborted or invalid input
The project is managed with uv, linted and formatted with Ruff and type checked with ty.
uv sync # create .venv with runtime and dev dependencies
uv run pytest # run the test suite
uv run ruff check # lint
uv run ruff format # format
uv run ty check # type check
uv run ipconflict --help # run the CLI from the source tree