Minimal mgetty-like PPP answer daemon for a serial modem line.
It opens and locks a serial line, initialises the modem, waits for a call,
answers it, waits for CONNECT, and either hands the stream to pppd
(detected by a PPP LCP frame) or falls back to a login prompt.
makesudo make install
sudo systemctl daemon-reloadmake install copies the binary to $(PREFIX)/sbin (default
/usr/local/sbin) and the unit to /etc/systemd/system; override with
PREFIX=, SBINDIR=, SYSTEMD_DIR=, or stage with DESTDIR=. make uninstall removes both. The manual equivalent is:
sudo install -m 755 m2ppp /usr/local/sbin/
sudo cp m2ppp@.service /etc/systemd/system/
sudo systemctl daemon-reloadm2ppp [options] [-- pppd-args...]
Arguments after -- are passed through to pppd.
-d device serial device (default /dev/ttyds01)
-b baud initial line speed (default 38400)
-i string init chat (without CR) (default AT&F14+IF5+IM4;S0=0;E0;V1#CID=9)
-a string answer chat (default ATA)
-t seconds answer timeout (default 30)
-L dir lock directory (default /var/lock)
-p path pppd binary (default /usr/sbin/pppd)
-g path login program (default /bin/login)
-u user run pppd as user; if it cannot be changed, quit
-w seconds PPP frame detection window (default 60)
-P seconds show login prompt after N sec (default 6)
-c seconds pause before waiting again (default 0)
-I minutes hang up an idle PPP session after N min (default 10)
-r seconds modem-reinit/select interval (default 900; 0 disables)
-o seconds wait for the modem OK after init (default 2)
-T string TERM for login sessions (default vt100)
-v trace every step of the call flow to stdout
-F do not add /etc/ppp/options.<device> to pppd
-h show this help and exit
The instance name after @ is the device name without /dev/:
sudo systemctl enable --now m2ppp@ttyds01.service
journalctl -u m2ppp@ttyds01.service -fStop and disable:
sudo systemctl disable --now m2ppp@ttyds01.service./m2ppp -d /dev/ttyds01 -v