tools accomodating my cnc
Parse EdingCNC logs and extract the measured tool length. This will help setting the approximate length for making the rapid move downwards to the tool length sensor.
Example output:
T# Len
T1 30 1/8" x 22mm Zweischneider gerade 29.155 29.074 29.088 29.091 29.647
T2 40 6x32 Zweischneider gerade 39.55 39.313 38.932 38.274 38.475 38.121 37.678 37.355 37.355 37.042 36.552 36.202 35.974 35.416 36.049 37.766 37.724 34.277 34.264 34.342
T3 25 2x15mm Zweischneider gerade 22.2 22.327 22.1 22.807 23.56 23.557 23.555 24.742 24.663 24.017 24.077 22.506 22.872 22.923 22.839 22.614 22.49 22.381 22.301 22.254
T4 41 4mm x 32mm Zweischneider gerade 40.152
T5 24 1/8" x 15mm Zweischneider gerade 21.799 22.9 21.775 22.708 23.191 23.124 23.989 22.33 21.042 22.561 20.797
T6 32 20mm Bosch Planfräser 29.011 28.957 28.824 31.233 30.138 30.175 30.066 29.899 29.91 30.388 31.816 28.679 28.606 28.44 28.531 28.606 27.825 27.7 28.067
T8 36 8x32 Zweischneider gerade 35.777 34.713
T9 45 abgebrochen 10° Gravur 43.503 43.489 43.302 43.457 43.235 43.333 44.874 44.486 42.84 42.794 42.879 42.9 42.95 44.079 43.795 42.979 43.026 43.151 42.939 42.928 43.05 42.915 42.678 42.973 42.942
T10 40 6x32mm Ball Endmill 37.836 39.636 39.227 39.225 38.574 39.3 38.853 38.342 38.225 37.296
T11 47 8x12mm Ball Endmill 36.991 36.952 46.238 34.372
T15 49 Schruppfräser 8mm 48.733 48.661 48.686 47.309 47.34
T21 25 Spiralverzahnt 1,5mm (grün) 24.249 24.11 24.107
T33 25 Spiralbohrer 3mm 24.1
T34 24 Spiralbohrer 2,7x12mm gold 19.424 23.939 22.908
T42 30 4mm x 22mm Zweischneider gerade 29.917 29.808 25.834
T44 29 20° Gravur 4mm 28.006 27.925 28.276 27.994 27.9
T62 30 6x22 Zweischneider gerade 27.814 27.757 29.222 27.264 27.149 27.139 27.1 26.824 26.539 26.375 26.324 25.145 25.094 25.086 27.286 27.198 27.065 27.056 27.417 27.254 27.14 27.272 27.025 26.987 26.648 26.576 26.451 26.275 26.275 25.053 24.275 27.342 27.148 27.006 26.934 26.654
T65 54 6x45 Sorotec Holzfräser Z2 53.378 53.516 53.116 53.205 52.903 53.308 51.39 51.634
T84 33 8mm 2x45° Fase 32.825
T86 75 8x62 Zweischneider gerade 74.3
T89 27 PCD 8mm 90° Fase 23.602 23.552 23.699 23.558 23.575 23.703 24.927 25.069 24.867 24.7 25.047 24.808 24.803 26.333 24.83 24.933 25.046 24.866 24.808 24.825 24.874 23.308 23.334 22.562 22.476 22.942 23.065 22.931 22.619
T92 21 Zinkenfräser 14,3 mm 20.472
Parse EdingCNC logs and detect, which tools are being used most frequently. This should help to identify the amount of tool holders you really need.
Example output:
Logs go back until: 2021-10-29
Most frequently used tools:
36x tool(s) [62]
29x tool(s) [89]
25x tool(s) [9]
20x tool(s) [2, 3]
19x tool(s) [6]
11x tool(s) [5]
10x tool(s) [10]
8x tool(s) [65]
5x tool(s) [1, 15, 44]
4x tool(s) [11]
3x tool(s) [21, 34, 42]
2x tool(s) [8]
1x tool(s) [4, 33, 84, 86, 92]