ARM ICE, JTAG, SWD

MMDVModem for SDR apps - mmdvm firmware port for running on x86/ARM Linux

Digital Speech Decoder - Florida Man Edition

Cross-mode conversion tools for MMDVM software

Noise Generator with precise spectrum and crest factor control

C++ implementation of RAVENNA AES67 ST2110-30 for desktop and (virtual) servers

Pluto DVB2 Firmware for DATV based on maia-sdr scripts

OpenAvnu - an Avnu sponsored repository for Time Sensitive Network (TSN and AVB) technology

AES70/OCA device framework (for embedded devices) // WORK IN PROGRESS

I only use github for source distribution, not version control. I am unlikely to see pull requests or issues raised here

Timecode(LTC) signal to OSC translator

Amateur Radio Emergency Data Network (AREDN)

HamMessenger is a portable device that uses a ham radio and the APRS protocol as a medium to send and receive text messages.

Dashboard SVXReflector V2 is the second improved version of the Dashboard SvxReflector by CN8VX.

Tools for reading and writing the Motorola Jedi series radios, specifically the MTS2000.

Motorola MotoTRBO IPSC Client

Hardware and pcb designs for the ft8900 interface

firmware for the FT8900 interface unit

.NET Standard 2.0 library implementation of the Open Media Transport protocol

Cross-platform Qt 6.9 VoIP client for amateur radio operators. Connect to SvxReflector networks with native iOS/Android apps featuring Opus codec, tap-to-talk, and background operation.

CAT control for the TYT TH-9800 radio using the serial protocol between the radio body and the radio head.

Implementation of communication channels to interact with LLM/NLU bot assistants.

Tetra_Link_boardIWQZZ

The Nucleo TNC is a breadboard implementation of the Mobilinkd TNC3 using a STM32L432KC Nucleo32 board. This TNC faithfully implements the audio section and EEPROM storage of the TNC3. It omits the…

Wrapper for easy use of ESP-NOW on ESP32 and ESP8266

Yet another ESP8266 (ESP-03) based ultra low power weather logger with 4 sensors

Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...

Running Tailscale on Ubiquiti EdgeOS