An APRS library for the Arduino IDE

Advanced repeater system software with EchoLink support for Linux including a GUI, Qtel - the Qt EchoLink client

Digital Speech Decoder - Florida Man Edition

Pluto DVB2 Firmware for DATV based on maia-sdr scripts

OpenAvnu - an Avnu sponsored repository for Time Sensitive Network (TSN and AVB) technology

Motorola MotoTRBO IPSC Client

WIP: Port of Reticulum Network Stack to C++ specifically but not exclusively targeting ESP32 and better MCUs.

RNode is an open, free and flexible digital radio interface with many uses

MicroModem-compatible PCB shield for Arduino Nano by LY2EN

The cryptography-based networking stack for building unstoppable networks with LoRa, Packet Radio, WiFi and everything in between.

QMesh: a synchronized flooded mesh network for voice over LoRa

HBNet is a fork of HBlink that includes a web GUI, APRS, SMS decoding, and other features.

Used to encode and decode AMBE

This is a fork of Egzumer https://github.com/egzumer/uv-k5-firmware-custom

Open re-implementation of the Quansheng UV-K5 firmware

Complete yocto project for Raspberry PI with GUI, WiFi, SSH, Manual, Layers, and modules

The Crazyflie Nano Quadcopter client for Android OTG or BLE enabled devices

Forks the version of Klipper modified by Desuuuu, to integrate DWIN_SET with Klipper through the motherboard/display UART interface.. Use only with this DWIN_SET: https://github.com/Thinkersbluff/D…

MakeCode UF2 bootloader for STM32 Blue Pill

Control of PixMob IR Wristbands via DMX/ArtNet

OO C++ RepRap Firmware

A Cura plugin that adds simple shapes (cube, cylinder, tube) and also 24 Calibration and test parts + 7 Postprocessing scripts

An open source firmware for JYE Tech DSO-150 Digital Storage Oscilloscope

ChibiOS fork for Raspberry PI experimentation. See wiki for Pi-specific information.

[WIP] EEPROM driver for ChibiOS/RT (SPI and I2C)

Speech and Vision Based Intelligent Personal Assistant

Eagle library for the ESP8266

whitecat with compiled and sources libraries to build whith Allegro 4.4.2, opencv 2.4, Openlayer 2.1, libharu 2.0.8, MidiShare etc...

Arduino and Raspberry Pi driver/libraries for nRF24L01