Stars
Small footprint and configurable SDCard core
USB-enabled bootloaders for the nRF52 BLE SoC chips
A lightweight Repeater Daemon implemented in Python, built using the pymc_core library.
RNode is an open, free and flexible digital radio interface with many uses
Raspberry Pi Zero shield with the SX1255 RF transceiver chip
SDR design based on the AT86RF215 transceiver with IQ LVDS / FPGA DDR (dual-data-rate) interface
An breakout board for the AT86RF215 dual band (sub-gigahertz & 2.4 gigahertz) IEEE 802.15.4 transceiver
A tool to resample, filter, shift, and correct I/Q data streams from files or SDRs.
Create your own AirTag with OpenHaystack, but without the need to own an Apple device
Spicing up the first and (no longer) the only EU FPGA chip with a flashy new board, loaded with a suite of engaging demos and examples => https://www.chili-chips.xyz/open-cologne | Also see https:/…
QCSuper is a tool communicating with Qualcomm-based phones and modems, allowing to capture raw 2G/3G/4G radio frames, among other things.
A 5G Standalone cellular network telemetry tool, for network measurement and performance optimization
An Open-source LTE Downlink/Uplink Eavesdropper
free5GRAN is an open-source 5G RAN stack. The current version includes a receiver which decodes MIB & SIB1 data. It also acts as a cell scanner. free5GRAN works in SA mode.
Flashrom/serprog compatible firmware for the Raspberry Pi Pico
Framework for tracking and building your own Google Find My Device / Find Hub trackers 🧭
A PCB to neatly package a rp2350b with two 12bit high speed adc and four channel audio input for use with hsdaoh
MacroSilicon MS2109 research, code and information
Firmware for Raspberry Pico to work as JTAG debugger using OpenOCD
Line rate Ethernet interface for RP2XXX.
Tools for Working with the CC13XX and CC26XX RF Core