Skip to content
sl2365Public

About

After collaberating with OxoMusic on Synth2 to create a Windows version, here's a fork of that project.

Resources

Stars

3 stars

Watchers

0 watching

Forks

Repository files navigation

Synth2

Release Release Date

Latest Asset Downloads Total Downloads

The Synth2 panel

IMPORTANT:

This version is a fork of Chabs version. It provides several enhancements that Chab didn't include due to him wanting to keep a base version that is faithful to the original. This fork uses a different folder location than Chabs, so as not to cause conflicts. It's pretty much identical feature-wise and the sound engine is identical, though I added a new filter type: Notch.

Feature Chab's Synth2 Synth2 (sl23)
Filter types 5 types: LP12, LP24, HP12, BP12, LPDL 6 types, adding a resonant Notch filter with adjustable peaks
Arpeggiator 4 modes: Up, Down, Up & Down, Random Adds As Played, following the order notes are pressed
GUI layout editor Fixed interface layout Built-in editor to move controls, resize sections, save custom layouts, undo and redo changes
Custom layouts Factory layout only Custom layouts stored in layout.json, separately from factory positions
Preset favourites Standard preset browser Adds a virtual Favourites bank for quick access to preferred presets
Preset colour display Standard browser colouring Additional preset colour coding, with a user preference to enable or disable it
Theme storage Central themes.json, plus individual theme files Individual Themes*.json files only, with separate current-theme state
Theme customisation Standard palette editor Additional Windows-specific colours for the voice grid, preset browser and selection display
GUI interaction Original Windows control behaviour Improved LED double-click reset, control positioning, knob interaction and other refinements
Portable data Synth2_Data beside the VST3 bundle Also supports Synth2_Data beside the internal VST3 binary
Standard data folders Oxo Music\Oxo Synth2 under AppData and Documents Independent Synth2_Data folders under AppData and Documents
Plugin identity Oxo Synth2 / Oxo Music Synth2 (sl23) / Dead Channel Audio, with separate VST3 IDs
Version numbering Standard three-part version Four-part version, starting at v1.1.5.25. This will follow Chab's version as far as the first three digits are concerned.

Both versions retain the original synthesis architecture, including oscillators, envelopes, LFOs, effects, delay, chorus, unison and Synth1 preset support.

This fork deliberately preserves the sound of the five original filter algorithms. The additional Notch algorithm is the principal new DSP feature. The other enhancements primarily affect the GUI, workflow and data management.

Chab's upstream also supports Windows VST3, so the Windows port itself isn't a fork-only feature.

Original info

A free, open-source recreation of Synth1, the classic freeware synthesizer by Daichi Laboratory (website).

Synth1 has been my go-to synth for years, as it has for many musicians, with thousands of patches on the web. Sadly, it seems to have been abandoned in recent years. No updates, no email replies. Mac users can keep it on life support with Rosetta, but Rosetta will be gone in macOS 28 (see this article).

Synth2 aims to keep those sounds playable on modern computers. Open source, so that anyone can keep the project alive in the future.

  • Same parameters, same UI: Some UX improvements (MIDI Learn, themes, etc.), but nothing was changed in the synth engine.
  • Import patches: All Synth1 patches (.sy1 files and zip banks) load just like in Synth1.
  • Carefully modeled with Claude: Opus 5.5 generated ~ 3 GB of measurement data before modeling every parameter one by one.

Note: the original Synth1 was studied only through its audio output. The binary was never disassembled or decompiled (see the clean-room rule in AGENTS.md).

Formats: macOS VST3 + AUv2, iPad AUv3, Windows VST3 (x64).

Relationship to Synth1

Synth2 is an independent recreation of Synth1 by Daichi Laboratory. It is not affiliated with or endorsed by Daichi Laboratory. No Synth1 code, binaries or artwork are used. The sound was matched only by measuring the original plugin's audio output (clean-room; see tools/s1ref).

Chab emailed Daichi in January 2025 and October 2026 to propose open-sourcing or supporting Synth1, and even offered to raise funds for their time, but got no reply.

Synth1 is a trademark/work of its respective owner. Patches (.sy1) are loaded for compatibility only; no Synth1 banks are distributed.

Dear Daichi, if you're reading this: I hope you're well. I'm not trying to take over your project; I'd just love to keep Synth1 patches playable for future generations. Please contact me: if you'd rather this project didn't exist, I'll take it down. Above all, I would love to see YOUR original code released under an open-source license. I'd be happy to maintain it if you're open to it.

Where the Windows version keeps your files

The Windows Synth2 (sl23) fork uses its own Synth2_Data folders, separate from the official Oxo Synth2 installation. The built-in data-folder name is the same in portable and non-portable configurations.

Without portable mode:

  • Settings and user data: %APPDATA%\Synth2_Data\ (normally C:\Users\<WindowsUsername>\AppData\Roaming\Synth2_Data\). This is where settings.json, theme_current.json, Themes\*.json, midi_mappings.json, layout and other user-state/index files live. Custom themes are individual files in Themes; themes.json is not used.
  • Preset bank library: Documents\Synth2_Data\ (your Windows Documents known folder; it can be redirected, so it is not necessarily under C:\Users). Imported bank folders live under this library root.

With portable mode: create a folder named Synth2_Data in either of these locations (no installation or registry changes required):

  1. Beside the loaded VST3 binary: Synth2.vst3\Contents\x86_64-win\Synth2_Data\ (inside the VST3 bundle).
  2. Beside the outer VST3 bundle: <VST3 installation directory>\Synth2_Data\.

If both portable folders exist, the binary-adjacent folder takes precedence. Portable mode stores settings, individual themes and other user files in that Synth2_Data folder; preset banks live in its Presets\ subfolder. When neither portable folder exists, Synth2 uses the two Windows user folders listed above. Restart your DAW after adding, removing or relocating a portable folder so all plugin instances use the same selection.

Existing data is not migrated or deleted automatically. Older data in %APPDATA%\Oxo Music\Oxo Synth2\ and Documents\Oxo Music\Oxo Synth2\ is not read by this Windows fork. Keep a backup and manually copy any desired settings, themes or bank folders to the new locations before relying on them. When switching to portable mode, place bank folders under Synth2_Data\Presets\, not beside the settings files. This Windows-only folder change does not alter the macOS/iPad storage locations, VST3 identity, presets or sound engine.

License

The code is under the MIT License.

Third-party: Steinberg VST3 SDK (MIT), Apple AudioUnitSDK (Apache 2.0).

The names "Oxo", "Oxo Music" and "Oxo Synth2" and the app icons are not covered by the code license: forks must use their own name and icons.

About

After collaberating with OxoMusic on Synth2 to create a Windows version, here's a fork of that project.

Resources

Stars

3 stars

Watchers

0 watching

Forks

Releases

Packages

Contributors

Languages