ESP32 + CC1101 (433MHZ) MQTT Auto-Discovery, Control for Lucci ceiling fan: speed, airflow direction.

About Arduino script for receiving and decoding the Drop Rain Gauge via 433 CC1101 - TFA Dostmann 30.3233.01 Regenmesser

RemoteSwitch library for Arduino

ESP32 RF button press detect using non blocking RMT for common EV1527 and many others without a library in Arduino

ATTINY13A 433MHz receiver

NewRemoteSwitch library for Arduino. Made by Randy Simons

GPS NMEA offline drone locator using Arduino, display, internal GPS and remote tracked GPS through radio

Send a 433mhz packet whenever an mqtt message gets received

433 MHz daemon, forked from xkonni. Support: Dimming Plugs, 32bit Hard-coded code, IPv6

RemoteSensor library for Arduino to transmit and receive data from weather stations

串口型315,433模块使用esp8266连接wifi远程控制

Homey support for LEDS-C4 Ceiling Fans

Use wall mount switches that trigger MQTT commands

RESTful API for the node-rcswitch binding based on Node.js/restify.

RF.Guru High power LoRa APRS Tracker for automobile use, 433mhz 500mW 13.8v

A dirty, but easy, way to capture and replay 433mhz messages

PiFunk Radio Transmitter - with FM/AM-Modulation for HAM-Bands (CB 27 & PMR 446)

A .net package to get the communications going with a HomeWizard. You can use this package to control switches/dimmers and read all the data from the HomeWizard.

The unofficially supported ioquake3 engine by pedrxd for the game Urban Terror 4.2/4.3