ESP32 + CC1101 (433MHZ) MQTT Auto-Discovery, Control for Lucci ceiling fan: speed, airflow direction.

About Arduino script for receiving and decoding the Drop Rain Gauge via 433 CC1101 - TFA Dostmann 30.3233.01 Regenmesser

RemoteSwitch library for Arduino

NewRemoteSwitch library for Arduino. Made by Randy Simons

A .net package to get the communications going with a HomeWizard. You can use this package to control switches/dimmers and read all the data from the HomeWizard.

433 MHz daemon, forked from xkonni. Support: Dimming Plugs, 32bit Hard-coded code, IPv6

ATTINY13A 433MHz receiver

ESP32 RF button press detect using non blocking RMT for common EV1527 and many others without a library in Arduino

Homey support for LEDS-C4 Ceiling Fans

GPS NMEA offline drone locator using Arduino, display, internal GPS and remote tracked GPS through radio

Send a 433mhz packet whenever an mqtt message gets received

串口型315,433模块使用esp8266连接wifi远程控制

RemoteSensor library for Arduino to transmit and receive data from weather stations

A pure python client to connect to a pilight daemon. Sendind and receiving commands can be asynchronous.

Use wall mount switches that trigger MQTT commands

RESTful API for the node-rcswitch binding based on Node.js/restify.

RF.Guru High power LoRa APRS Tracker for automobile use, 433mhz 500mW 13.8v

The unofficially supported ioquake3 engine by pedrxd for the game Urban Terror 4.2/4.3

A dirty, but easy, way to capture and replay 433mhz messages