KinCony ESP32-S3 Core Development Board RTU, I2C, 1-wire Demo Application, demonstrates sensor interfacing over serial MODBUS, over I2C, and one-wire.

Monitors, loggs and generate of 2D line plots using a Raspberry Pi 1-wire temperature sensors. Written in PHP and R.

Pools remote ds18b20 sensors and sends data to ThingSpeak.com (or local RRD database)

Go implementation of 1-Wire protocol.

A realtime monitoring system to keep track the temperature of various spots in your system

Reading data from the temperature sensor DS1820 and writing to MySql

SensorWatcher is a firmware for the ESP32 family of microcontrollers that automatically detects I2C, 1-Wire, or BLE sensors and uploads the sensor measurements to backends using HTTP, MQTT, or UDP.

Heltec LoRa 32 LoRaWAN Node

How-To-DS18B20 on Raspberry Pi

Allows to manage a 1-Wire bus through a digital pin of an ATmega chip.

Family of FHEM modules to support the Esera 1-wire controller and various sensors and actors.

A simple Wi-Fi based temperature logger for Steady-State or Dynamic thermal testing needs.

LCD Clock for HD44780 16x2 display over I²C by PCF8574 bus expander with 1-wire Thermal Sensor extension for DS1820

Python Script for sending 12 W1 1 wire sensors into a Home Assistant Instance via MQTT Discovery.

1-Wire-to-NTC adapter built on Arduino Nano Every

PioT: Off-Grid Farm Automation with Raspberry Pi

Read Dallas temperature (DS12B20) over serial port

Home Climate Control ESP32 based edge device firmware

Board fitting into wall switch, support for 1Wire, quadrature encoder, and much more. RS-485

DS2482 I2C to 1-Wire master ChibiOS 16.x driver on STM32F103C8T6