This repository contains all my practice codes of TM4C123GXL coded in CCS7. The Texas Instruments Tiva C LaunchPad board TM4C123G is used for the code. The TM4C123GXL Launchpad has the TM4C123GH6PM microcontroller which is based on the ARM Cortex-M4F microcontroller architecture and clocked at 80 MHz (with 100 DMIPS)

ARM Cortex-M3/M4 drivers and projects made on TI Tiva-C and STM32F103.

A simple template to write, compile and flash code for the TM4C123G Launchpad board on a Linux system.

Minimal TCP/IP stack for non OS based micrcontroller enviornment.

Tiva C: UART, I2C, SPI, SSI

A development environment for Texas Instruments Tiva C Series microcontrollers using Docker and Visual Studio Code

IMU Sensor integration with Tiva Launchpad

Controlling LEDs with Tiva-C by a GUI that send commands to the MCU using UART

Driver library for the TM4C123GH6PM Microcontroller

GPIO management library for Tiva-C Series TM4C123G

This repository contains all my practice codes of TM4C123GXL coded in IAR Workbench. The Texas Instruments Tiva C LaunchPad board TM4C123G is used for the code. The TM4C123GXL Launchpad has the TM4C123GH6PM microcontroller which is based on the ARM Cortex-M4F microcontroller architecture and clocked at 80 MHz (with 100 DMIPS).

DHT11 Bare-metal driver for TM4C123GH6PM

Programmed in C using Keil IDE with ARM Cortex architecture

AUTOSAR Port driver based on Tm4c123gh6pm

Course of EE447 "Introduction to Microprocessors", given in Fall 2022 Semester in METU. Software is developed in ARM Cortex-M assembly and C. Labs run on the TM4C123 board.

This is a driver for 128x32 oled screens that use SSD1306 and communicate through the I2C protocol.

The goal of this project is design a system capable of measuring resistance, inductance (and ESR), and capacitance

RTOS solutions for an M4F controller that implements a cooperative and preemptive RTOS solution with support for semaphores, yielding, sleep, priority scheduling, priority inheritance, and a shell interface.

EK-TM4C123GXL project set up with CMake/gcc/vscode

TM4C123 controlled ADAU1701 based headphone amplifier