A driver for ublox gps

Extended Kalman Filter predicts the GNSS measurement based on IMU measurement

Arduino library for the fastest and simplest communication with u-blox GPS modules

Arduino and CMake library for communicating with uBlox GPS receivers.

A GPS setup to log your track lap times, based on ESP32, with the ability to interface with several mobile phone apps that log your speed and position via Bluetooth Low Energy, Bluetooth or WiFi

ROS2 drivers for U-blox ZED F9P

u-blox GNSS receiver library light weight for low power tracking application

Software for a Raspberry Pi based muon detector system of the MuonPi project.

Ublox Linux Library

eCAL interface to the linux gps service daemon

An Arduino-based GPS tracking solution. Uses one Arduino as the GPS tracker and the other to display the GPS location.

Ublox GPS I2C async library for mbed

Time interval counter based on TI TDC7200 chip with GPS modules for precise time standard comparison.

Sparkfun UBX GNSS Receiver monitor utility for ESP32 and VSCode / PlatformIO

This is a project I'm working on so I can have cruise control in my car. It uses GPS in order to monitor the speed of your vehicle, and shows your speed on the OLED display. It allows you to set your desired speed limit using two push buttons. If you speed, the device screams - the pitch changing with your speeding.

A sketch that not only parses NMEA sentences, but also allows sending UBX commands and decrypt answers from the ublox module

Empower your autonomous vehicle projects with custom-made flight computers and optimized code. Our DIY solutions offer the flexibility and control you need to take your vehicles to the next level. Visit our Discord Server at https://discord.gg/HCXPvBpP

Telemetry Tracking & Reporting System

Example of the UBlox driver using a STM32 microcontroller

An update to RAK1910_GPS_UBLOX7.ino that fixes missing N/S and E/W markers