Communicating analog data over low-cost RF modules between Arduino microcontrollers

arduino nano as ioexpander controlled by esp8266 through TWI

An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on a straight Arduino

this repository shows how to control brushless motors using ATmega328p MCU.

This is a repository about remote controlled robot control using raspberry and hoverboards.

Converts animated GIFs to a custom format for playback on microcontrollers

✔🔓 Room Lighting using WS2811B LED-Strips

Interfaz USB XInput / Xbox 360 | Creado para AVR ATMega32u - Pro Micro (Genericos o Spark Fun) 5V 16MHz

Implémentation d'un chenillard à 8 LEDs

An Arduino driven I-Ching device, that allows one to cast the hexagrams associated with their consultation

NTC thermistor to 1-Wire converter on Arduino Nano

Wemos ESP8266 board receives data on sea water temperature and air temperature via the Internet at openweathermap.org and worldseatemp.com and transmits them via the UART protocol to the Arduino board for further display on LED modules.

MIDI control your DAW with a Wii Nunchuk, using Arduino Uno over USB

Capture The Flag for drones :)

Custom altimeter for rocket.

Arduino Nano firmware for Nixie_PCB

A C-library for a button functionality with Arduino

This is a light version of GRBL v1.1 with no spindle and coolant support. This version allow you to use coreXY with an arduino nano and a GRBL v4 board and get rid of the "Sketch too big." error in arduino IDE. I use It for my CNC plotter / drawing machine

Arduino reads from vesc and shows it nicely on a ssd1306 128x64 display via spi

Small project to automatically open a valve when a water container is filled to a certain point