Samsung SmartThings SmartApps and Device Handlers
HA integration for CH/DHW and HVAC systems that use the RAMSES-II RF protocol
An interface for the RAMSES-II RF protocol, as used by Honeywell-compatible HVAC & CH/DHW systems.
RAMSES-II is a Honeywell RF protocol for HVAC and CH/DHW
An asyncio Python client to the Resideo TCC web API
A simple web based schedule editor for the evohome heating control system
Evohome2mqtt bridge inspired to the mqtt-smarthome project.
Home Assistant Honeywell Evohome Climate Zone Card
Plugin for Jeedom 3.x & 4.x, regarding the Honeywell systems : Evohome, Round And Lyric.
Homie v3 for Honeywell Thermostats
ESP32-S3 Ethernet(W5500) MQTT Gateway for Evohome/Ramses II protocol.
This service adds presence detection and other cost saving measures to any Honeywell Evohome installation.
For ESP32, If you want to use the smart Thermostats but have a serial heating system, where one radiator off means all are in the line, this manages it so they all open until the room you want to be at the right temperature is reached, then it closes them all off.
Indigo plugin for the RAMSES-ESP USB gateway — local Honeywell Evohome control over RAMSES-II radio, no cloud. Each zone also reports its radiator valves' battery and whether they are still answering, with a valve that has not spoken yet reported as unknown rather than silent.
Indigo plugin for 24/7 Evohome TRV heating control across 12 zones — timed boost, an En Suite drying run on cold mornings through the summer shut-off, morning schedules with a warm-morning skip, whole-house summer shut-off, window-aware floor heating, overheat prevention, and Away, Both-Out and Guest modes.
To associate your repository with the evohome topic, visit your repo's landing page and select "manage topics."