Renode - Antmicro's open source simulation and virtual development framework for complex embedded systems

Open-source reverse engineering and firmware development for the FNIRSI 2C53T oscilloscope/multimeter/signal generator

Repository with RP2040 simulation models.

Reverse engineering the Motorola sensorhub firmware

A plugin for Ghidra for automatic analysis of the binding of individual registers and their layouts.

Run your tests in a configurable, emulated Linux environment with a custom kernel and access to virtual peripherals

A custom Cargo runner that runs Rust firmware in the renode emulator

Rust bootloader, firmware and CLI tools for the AirGradient PRO

Embassy firmware emulated with Renode

Compile C code for an ARM Cortex-M micro-controller and run it in Renode

Firmware development for a low-cost Vaccine Refrigerator (VARE) using the STM32F407G-DISC1 Microcontroller programmed in C with PlatformIO IDE using the STM32 HAL Library and simulated with Renode™.

FPGA support for anode using CFU Playground

Firmware Project for counting people using STM32F4x microcontroller

Use this repository to create a reproduction case for your Renode issue

Renode GitHub action for testing software in the Renode environment

A simple Renode example with Robot Framework tests for an STM32 board.

Tiny CNN cat/dog classifier for RISC-V edge AI, with PyTorch training, quantized firmware export, and Renode simulation benchmarks.

renode script writer with web interface