rk3328

ArchLinux ARM SD card images for quick start with ArchLinux on ARM SBC & TV Boxes

This source code builds openwrt for Rockchip Soc from upstream source code https://github.com/coolsnowwolf/lede

scripts for build beikeyun firmware

OpenWrt support for FriendlyElec NanoPi R2S RK3328 SoC board with 2x1000Mbps ports. This repository is not a fork of friendlywrt but a fork of upstream/openwrt.

Ubuntu 20.04 LTS Server for NanoPi R2S - Mainline Kernel 5.7.y / 5.8.y / 5.9.y / 5.10.y

Armbian 24.2.1 Bookworm with Linux 6.6.16-current-rockchip64 with Home Assistant Supervised 17.0

OpenWrt/Linux/u-boot for Radxa Rock Pi E

About EAIDK-310 board firmware.

rkdeveloptool v1.32 for MacOS. Homebrew Tap for Rockchip flashing and debugging tools

Migrate a Phrozen Arco to Debian Bookworm and Klipper v0.13. Community project, not affiliated with Phrozen.

RockPi E - Ubuntu 20.04 LTS (kernel 5.9.0-rc5)

Various stuff I've put together for running alternative Linux based operating systems on the Futurehome Cube-2v0-EU smarthub

Open-source bare-metal real-time operating system for ARMv8-A with multicore scheduling and EtherCAT master support.

Ultimate network stack optimization for NanoPi R2S on OpenWrt. Features 4-core RPS/XPS balancing, BBR, adaptive CAKE SQM, and SD-card protection. Low-latency, bufferbloat-free 500Mbps-1Gbps router.

Flash a BirdDog PLAY in Rockchip recovery mode from the browser over WebUSB, optionally injecting a .fw update package into the image

Turn a $20 RK3318 Android TV box into a browser-based IP-KVM with Armbian — HDMI capture, USB HID gadget, web UI — plus DisplayLink console and front-panel display

A GPIO timer for DerbyNet server (https://derbynet.org/)

patch for official kernel makefile of roc-rk3328

Unofficial (DIY) Armbian for the Futurehome cube-2v0-eu smarthub

Replacement OS turning a BirdDog PLAY (RK3328) into a Bitfocus Companion appliance — server, HDMI web UI and USB surfaces. Early beta.