Advanced firmware to add native Apple HomeKit and custom configurations, compatible with any SoC based on ESP32, ESP32-S, ESP32-C and ESP8266 series. (Shelly, Sonoff, Electrodragon, Tuya...)
Espressif ESP32 Based Smarthome screen for MQTT
Arduino Core for Silicon Labs devices
基于STM32的智能家居系统，运用贝壳物联服务器。主要模块包括ESP8266、DTH11、烟雾传感器、红外传感器、蜂鸣器组成。其中DTH11检测环境温湿度，烟雾传感器检测是否有着火现象，红外传感器检测是否有人异常闯入，通过蜂鸣器报警和通过邮箱等通知用户。
Лампа-будильник на адресных светодиодах и esp8266. Добавлена интеграция с MQTT и Discovery Home Assistant, Apple Home Kit, Яндекс Алисой и Node-Red
I build my own clone of "LaMetric"-smartwatch but with some Colorduino for Twitch, YouTube, Twitter, CSGO, etc.. (Working)
mTower is Trusted Execution Environment specially designed to be used on MicroController Units (MCUs) supporting ARM TrustZone technology (e.g., Cortex-M23/33/35p). mTower operates well under restrictions typical for such environment – small RAM and ROM sizes, relatively low performance, absence of rich OSes providing variety of services availab…
libzwaveip - Control Z-Wave devices from your IP network
CUx-Daemon – a universal interface between the HomeMatic CCU logic layer (ReGaHSS) and third-party (EnOcean, M-Bus, 1-Wire, ArtDMX, etc.) external and virtual devices.
Home Assistant (HA) Dashboard for Lilygo T5 4.7 inch E-Paper display
A runtime-configurable Home Assistant wall panel for ESP32-P4 touchscreen devices. Build your dashboard directly on the device — no YAML edits, no firmware rebuilds.
WiFi smart blinds controller for ESP32
WIP project to control your home-automation using Domoticz and a CYD (Cheap touchscreen).
A compact industrial-grade 64-channel Modbus RTU output module.
To associate your repository with the smarthome topic, visit your repo's landing page and select "manage topics."