stm32g0

STM32 core support for Arduino

All CMSIS and HAL code for the STM32 microcontrollers bundled together in one repository.

Next Generation Electrostimulation Machine Development Kit

x-cube-usb-pd STM32 Expansion Package related to USB-IF Type-C Power Delivery protocol is no more recommended for new design. The USB power delivery PHY is now integrated in the new STM32 series. See below link.

General purpose power controller, capable of driving soldering irons using different voltages and probe types.

STM32G0 examples

STM32G0 device-specific USB Power Delivery middleware library for managing the Type-C physical layer.

Embedded software tutorials based on stm32g0 includes assembly and register level bare metal c codes

stm32g0 series display driver (spi, dma). Supports ili9341, st7789

L2 R2: ST 64MHz Cortex-M0 MCU (STM32G030/STM32G031)

H₂H³ | Twin USB Host Switch × Triple USB Hub (with OLED Telemetry)

X-CUBE-AZRTOS-G0 (Azure RTOS Software Expansion for STM32Cube) provides a full integration of Microsoft Azure RTOS in the STM32Cube environment for the STM32G0 series of microcontrollers.

Lightweight UART bootloader for STM32 with dual-slot firmware storage, CRC32 verification and BCP control protocol

This is an example tailored to different STM32 Nucleo boards demonstrating that the STM32 FDCAN can reach 8Mb/s during the data phase.

8 bit Audio Recorder & Player using STM32G031K8 which is based ARM CORTEX M0+

X-CUBE-UCSI is an STM32 expansion SW to manage USB Type-C connector for an MPU using standardized UCSI protocol

小四轴

STM32G0xx - just 2 files, 20 lines of C code and only 176 bytes of code. No libraries.

STM32-Based Adaptive Cruise Control and Collision Avoidance System using STM32 NUCLEO-G071RB, HC-SR04 Ultrasonic Sensor, PWM Motor Control, and Embedded C.