Showing posts with label fortification. Show all posts
Showing posts with label fortification. Show all posts

Friday, April 30, 2010

Tower & Zariba - Post #3

I made some more progress on the tower and zariba, and even on one of the gun emplacements (from several posts ago).

The Watch Tower

Here the tower has received an initial coat of medium gray paint.  I'll highlight this with lighter gray and white and also throw in some lighter brown and tan drybrushing.  The hillock still needs its terraining application applied.

The roof was constructed of a piece of 60 point cardstock and covered with a piece of white washcloth which has been painted with a watered down gray same as the rest of the tower.  The roof will receive a brown, tan, and green drybrushing to simulate vegetation covering.

The Zariba

I applied Durham's Rock Hard Water Putty to the base and then painted the whole thing Sandstone.  The vegetation was applied with Tacky glue.  I'll spray it with a diluted glue later and apply some more vegetation.

Here are two 2" sections sheltering a couple of Ral Partha British Naval landing party figures.
 
The Artillery Emplacement

Finally I added some interior planking and supports to one of the gun emplacements.  I'll do the same with the other two prior to applying the terraining.
 
All Three Pieces

Here's an overview of all three pieces.

Thursday, April 15, 2010

Artillery Emplacement

As I continue preparations for my June convention game, I needed some field fortifications for the supply post at Wadi Zoum-Zoum.  Using some of the 1/2" blue foam that I rescued from a dumpster, I created three small artillery emplacements, each capable of holding one gun and its four man crew.


I used my battery powered hot wire cutter to shape the foam and then cut out a small base of Masonite (a type of hardboard invented in my home state of Mississippi), beveling the edges with a wood rasp.  The base was spray painted with a sand camouflage color and the walls of the emplacement was painted with a sandstone color craft acrylic.  The two were then glued together with Elmer's white glue.  Good enough right now for the first play-test on Saturday, they will eventually have interior wooden slat walls and a terrain application on the outside and the "floor" of the interior.  I anticipate that I can use these for just about any period from the mid 1700s to modern times.

Here's another view from a slightly higher angle.

The Krupp gun and the Egyptian gunners are Ral Partha figures.