Candle Brooches

The Elephant's Trunk has a great idea I haven't seen before. She dressed up some plain candles with vintage brooches. They make the candles look so fancy!

.

See the Candle Brooches.

.

Pleated Ribbon Flowers!

The Pleated Poppy shows us how to make pleated flowers! Cute for hair, a brooch or pillows! Pleats rock!!!!!

See the pleated ribbon flower tutorial.

Guest Blogger - Cluck, Cluck, Sew - Scrappy Flower Pillow/Brooch

Hi I’m Allison from over at Cluck. Cluck. Sew.

I’m so excited to be posting here today! I love to sew!!! I especially love to sew quilts and I have tutorial for some of them on my blog.

Here is The Double Hourglass Quilt the EASY Way.

Or maybe you would like to make a Scrap Buster Fall Pillow.

If you like skirts, you will love this Drawstring Jersey Skirt !

I hope you come by to visit me at Cluck, Cluck, Sew.

Today, we are going to make this cute flower that is easy to make and uses up any leftover binding strips or jelly roll scraps (for all you sewers out there!). Mine is attached to my bag as you can see, and it looks so cute that I almost forget my bag is full of diapers and crumbled goldfish crackers. Now on the tutorial…

First you’ll need:

- 2.5” wide scraps of fabric in whatever colors your heart desires cut to various lengths. Mine were 3" long to 14" long. For fabric I used my leftover binding strips. My strips added up in length to about 2 yards, which made me a 5" flower. Add or take away strips or cut them shorter if you want a bigger or smaller flower. Shorter strips and more of them will make a more colorful flower.

- A sewing machine and a needle and thread.

-A piece of felt or other strong fabric, a hot glue gun, and a broach bracket.

Here are my various 2.5" wide strips. Put them in order from the color you want in the center of the flower, to the outside of the flower. Now sew them all together end to end, and press seams open.

Now folding your strip in half as you go, serge OR sew a zig zag stitch down the raw edges. Do the same on the ends.

With your sewing machine….increase the stitch length as high as it will go (a 4 on my machine) and increase the thread tension as high as it will go. Now sew down your strip again right along your sewn/serged edge. The strip should gather as you go. If it is gathering TOO much, lower the stitch length (see picture below for how much mine gathered)

**** I tried this gathering method on a computerized machine first and it would NOT work. When I switched to the older, manual machine it worked like a charm. So if this method isn’t working on your machine…you can either gather it by hand by folding and scrunching the sewn edge as you sew over it, or use a gathering foot. Because the strip is so long it won’t work to sew down it with a large stitch length and pull the bottom thread.

This is what it should look like after its sewn:

Starting with the end you want as the center of the flower, fold the raw edge down and make the center of the flower by folding the strip around it. Sew in place either by hand or machine with a few stitches.

Continue to wrap the sewn/serged edges around the center, securing the edges to the center with your needle and thread. I put the needle and thread all the way through the center for the first few layers.

As you continue adding the layers the center will have a tendency to stick out, but try to keep the sewn edges lined up and flat. Also as you add more and more layers, you can secure the layers to the previous layers with a stitch every half inch or so. If you secure the layers loosely to the previous layer, you’ll get a better result.

This takes a little bit of practice, but I’m also quite possibly the worst hand sewer ever, so chances are you’ll do it perfectly the first time.

When you get to the end, or the flower is as big as you want it, cut off the end and tuck the end to the back. Secure it with a stitch and knot your thread off.

Make sure your flower is just right and poke the center down a little if its sticking up too much to make the back flat.

Cut a circle out of your felt, just big enough to cover all of the sewn / serged edges.

With your hot glue gun, cover the backside of your flower with glue, then press the felt onto the back.

Then hot glue your broach bracket to the felt. (think I used enough hot glue??? I’m paranoid)

And there you have it, your cute scrappy flower you can attach to just about anything.

To make the cute pillow below, make an extra long strip (about 7 ft. long…you can cut the length off if its too long) and sew it onto the pillow, pleating it as you go instead of gathering the strip on your machine.

You can find more sewing, quilting and home projects over at my blog, Cluck. Cluck. Sew. Thanks Michelle for letting me visit your blog today! -Allison

Allison, Thanks for that tutorial. I love the pillow!!!! Cluck, Cluck, Sew is a great blog for those who love to sew and quilt. Beautiful pictures. Detailed tutorials. Amazing projects. I highly recommend this blog. Visit Cluck, Cluck, Sew and become a follower!

Linking to: Funky Junk - Saturday Nite Special, Tatertots and Jello - Weekend Round-up, Under The Table And Dreaming., Show and Tell - Be Different, Act Normal

Book Paper Flowers

While this flower made from book papers is meant to be an ornament at Dreaming Under The Table, I am seeing many different possibilities for it! A hair bow, brooch, adornment, etc. Even though paper not hold up the best, I think it could work. (Or some company should just print old book pages on material)!

See the book paper flowers!