AUTOMOTIVE

LUXEON Altilon SMD

Automotive forward lighting source

LUXEON Altilon SMD is specifically designed and tested to meet

and exceed expectations for reliability, performance, and lifetime in

automotive forward lighting applications. It is designed to be assembled

with industry standard soldering reflow lines simplifying system

integration and lowering assembly costs.

LUXEON Altilon SMD provides industry-best thermal performance in

LED forward lighting applications, meeting both SAE and ECE color

specifications with finer granularity than existing systems. PPAP

documentation is available upon request. All LUXEON Altilon SMD LEDs

are IEC-60810 qualified.

Features and Benefits Primary ApplicationS

Higher drive current capability for increased flux performance Adaptive Lighting
Low thermal resistance and power consumption results in simplified thermal
management and system cost –– AFS

High flux output provides flexibility in styling and optical design Daytime Running Lights

Surface mount device to reduce overall costs Front Fog

Headlight

–– Low Beam

–– High Beam

–– Static Bending

RoHS
COMPLIANT

DS175 LUXEON Altilon SMD Product Datasheet ©2017 Lumileds Holding B.V. All rights reserved.
Table of Contents

General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Absolute Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Forward Current and Voltage Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Color Shift Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Operating Limits Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Designing with LUXEON Altilon SMD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Color Bin Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Color Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Product Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

DS175 LUXEON Altilon SMD Product Datasheet 20181021 ©2018 Lumileds Holding B.V. All rights reserved. i
General Product Information

Product Test Conditions

LUXEON Altilon SMD LEDs are tested and binned using a 20ms monopulse (MP) at 1000mA drive current, case temperature,
Tc, of 85ºC.

Part Number Nomenclature

Part numbers for LUXEON Altilon SMD follow the convention below:

A 1 S B – 5 8 5 0 B D H 0 C C C C 0

Where:

B – designates number of die (2, 3, 4 or 5)

C C C C – designates minimum flux bin

Therefore, the following part number is used for a LUXEON Altilon SMD with 3 die and a minimum of 780 lumens:

A 1 S B – 5 8 5 0 3 D H 0 0 7 8 0 0

Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON Altilon SMD
is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the
RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted
materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE).

DS175 LUXEON Altilon SMD Product Datasheet 20181021 ©2018 Lumileds Holding B.V. All rights reserved. 2
Performance Characteristics

Product Selection Guide

Table 1. Product selection for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C.

CONFIGURATION Part Number

1x2 A1SB-58502DH0xxxx0
1x3 A1SB-58503DH0xxxx0
1x4 A1SB-58504DH0xxxx0
1x5 A1SB-58505DH0xxxx0

Optical Characteristics
Table 2. Typical optical characteristics for LUXEON Altilon SMD at 1000mA, Tc=85°C.

Correlated Color Temperature Typical Total Included

Typical Viewing Angle [2]
Part Number Angle [1]
θ1/2
Minimum Maximum θ0.90V

A1SB-58502DH0xxxx0 5500K 6250K 140° 120°

A1SB-58503DH0xxxx0 5500K 6250K 140° 120°
A1SB-58504DH0xxxx0 5500K 6250K 140° 120°
A1SB-58505DH0xxxx0 5500K 6250K 140° 120°
Notes for Table 2:
1. Total angle at which 90% of total luminous flux is captured.
2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.

DS175 LUXEON Altilon SMD Product Datasheet 20181021 ©2018 Lumileds Holding B.V. All rights reserved. 3
Electrical and Thermal Characteristics
Table 3. Typical electrical and thermal characteristics for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C.
PERFORMANCE
Parameter
1x2 1x3 1x4 1x5
min 5.5 8.2 11.1 13.8
Forward Voltage, Vf [1]
max 7.0 10.3 13.6 16.9
typ 2.2°C/W 1.8°C/W 1.5°C/W 1.2°C/W
Electrical Thermal Resistance, Rth j-c electr [2]
max 2.5°C/W 2.1°C/W 1.8°C/W 1.5°C/W
typ 3.2°C/W 2.6°C/W 2.2°C/W 1.8°C/W
Real Thermal Resistance, Rth j-c real [3]
max 3.5°C/W 3.0°C/W 2.6°C/W 2.2°C/W
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
2. Rth j-c electr: Electrical thermal resistance (junction to case).
3. Rth j-c real: Real thermal resistance (junction to case) with wall plug efficiency included. Reference JESD51-51, JESD51-14, 4.1.3.

Absolute Ratings
Table 4. Absolute ratings for LUXEON Altilon SMD.
PERFORMANCE
Parameter
1x2 1x3 1x4 1x5
Minimum DC Forward Current 100mA
Maximum DC Forward Current 1500mA
Operating Case Temperature at 700mA [1, 2] -40°C to 130°C
Maximum Junction Temperature [1, 2. 3] 150°C
Operating Case Temperature at Maximum Current -40°C to 125°C
Maximum Junction Temperature
175°C
for Short Time Applications [4]
Maximum Vf at 1500mA & -40°C [1, 3]
7.8 11.6 15.4 19.3
Minimum Vf at 1500mA & 150°C 5.5 8.1 11.0 13.6
LED Storage Temperature -40°C to 130°C
Soldering Temperature JEDEC 020c 260°C
Allowable Reflow Cycles 2
ESD Sensitivity [5]
8kV HBM, 2kV CDM, 400V MM
Reverse Voltage (Vreverse) LUXEON Altilon SMD LEDs are not designed to be driven in reverse bias
Notes for Table 4:
1. Proper current derating must be observed to maintain junction temperature below the maximum, so that the LED is maintained below the maximum rated operating case temperature.
2. LUXEON Altilon SMD LEDs driven at or above the maximum rated operating case temperature may have shorter lifetime.
3. Please consult with Lumileds for more information on maximum time durations and forward currents for these temperatures.
4. Short time operations of less than 200hrs.
5. Measured using human body model (per JESD22 A114), machine model (per JESD22 A115) and charged device model (per JESD22 C101).

DS175 LUXEON Altilon SMD Product Datasheet 20181021 ©2018 Lumileds Holding B.V. All rights reserved. 4
Characteristic Curves

Spectral Power Distribution Characteristics

Figure 1. Typical normalized power vs. wavelength for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C.

Light Output Characteristics

Figure 2a. Typical normalized light output vs. case temperature for LUXEON Altilon SMD at 1000mA, 20ms MP.

DS175 LUXEON Altilon SMD Product Datasheet 20181021 ©2018 Lumileds Holding B.V. All rights reserved. 5
 Figure 2b. Typical normalized light output vs. forward current for LUXEON Altilon SMD at Tc=85°C.

Forward Current and Voltage Characteristics

Figure 3a. Typical forward current vs. forward voltage for LUXEON Altilon SMD 1x2 at Tc=85°C.

DS175 LUXEON Altilon SMD Product Datasheet 20181021 ©2018 Lumileds Holding B.V. All rights reserved. 6
 Figure 3b. Typical forward current vs. forward voltage for LUXEON Altilon SMD 1x3 at Tc=85°C.

Figure 3c. Typical forward current vs. forward voltage for LUXEON Altilon SMD 1x4 at Tc=85°C.

DS175 LUXEON Altilon SMD Product Datasheet 20181021 ©2018 Lumileds Holding B.V. All rights reserved. 7
 Figure 3d. Typical forward current vs. forward voltage for LUXEON Altilon SMD 1x5 at Tc=85°C.

Figure 3e. Typical forward voltage shift vs. case temperature for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C.

DS175 LUXEON Altilon SMD Product Datasheet 20181021 ©2018 Lumileds Holding B.V. All rights reserved. 8
Color Shift Characteristics

Figure 4a. Typical color shift in CIE 1931 x and y coordinates for LUXEON Altilon SMD at 1000mA, 20ms MP.

Figure 4b. Typical color shift over angle for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C.

DS175 LUXEON Altilon SMD Product Datasheet 20181021 ©2018 Lumileds Holding B.V. All rights reserved. 9
Radiation Pattern Characteristics

Figure 5. Typical radiation pattern for LUXEON Altilon SMD at 1000mA, 20ms MP.

Operating Limits Characteristics

Figure 6. Maximum forward current vs. case temperature for LUXEON Altilon SMD.

DS175 LUXEON Altilon SMD Product Datasheet 20181021 ©2018 Lumileds Holding B.V. All rights reserved. 10
Product Bin and Labeling Definitions

Designing with LUXEON Altilon SMD

Flux bins supportable for car programs depend on product color and program start- and end-of-production date. Flux roadmaps
by year and product color are maintained and available from the sales representative. Please contact a local sales representative
to request the flux bin range with best supportability for program timing.

Decoding Product Bin Labeling

In the manufacturing of semiconductor products, there are variations in performance around the average values given in the
technical datasheets. For this reason, Lumileds bins the LED components for luminous flux or radiometric power, forward voltage,
color point, peak wavelength, or dominant wavelength.

The CAT code identifies the flux and color bin of each part. The CAT code can be found in two distinct places, the package label
and the TnR label. LUXEON Altilon SMD LEDs are labeled using a 4-digit alphanumeric CAT code following the format below:

A B C D

Where:

A – designates minimum luminous flux per die (F=280, G=290, K=320, etc.)

B – designates number of die (2, 3, 4 or 5)

C D – designates color bin (example: 1D, 2C, 3B, 4A, etc.)

Therefore, a LUXEON Altilon SMD 1x5 with a minimum luminous flux of 280 and a color bin of 3B has the following CAT code:

F 5 3 B

DS175 LUXEON Altilon SMD Product Datasheet 20181021 ©2018 Lumileds Holding B.V. All rights reserved. 11
Luminous Flux Bins
Table 5 lists the standard luminous flux bins for LUXEON Altilon SMD emitters. Product availability in a particular bin varies by
color and platform start of production date. Contact your local sales representative for best supportability of programs.

Table 5a. Luminous flux bin definitions for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C.

Luminous Flux [1] (lm) per Die

Bin
Minimum Maximum

H 300 310
J 310 320
K 320 330
L 330 340
M 340 350
N 350 360
Notes for Table 5:
1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements.
2. Product availability in a particular bin varies by color and platform start of production date.
3. Contact local sales representative for best supportability of programs.

Table 5b. Luminous flux bin definitions for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C.
2 3 4 5
Bin
(1x2) (1x3) (1x4) (1x5)

H 600 900 1200 1500

J 620 930 1240 1550
K 640 960 1280 1600
L 660 990 1320 1650
M 680 1020 1360 1700
N 700 1050 1400 1750

The total flux bin is defined on a per die basis, the first letter on the flux bin will define the minimum flux per die and the second
letter will define the number of die in the device, i.e. C4 where C will designate a minimum flux per die of 250 lm and 4 will
designate that the part has four die, therefore the total flux from the device will be a minimum of 1000 lm.

This will allow for better flux bin granularity, as a 1x2 will have 20 lm flux bin increments, a 1x3 30 lm, a 1x4 40 lm and a 1x5 50 lm.
The flux bin is defined on the total flux of the device as die are not individually measured.

DS175 LUXEON Altilon SMD Product Datasheet 20181021 ©2018 Lumileds Holding B.V. All rights reserved. 12
Color Bin Structure
0.38

0.37

0.36
e
urv
d yC
0.35 k bo
c
Bla
y

0.34

0.33

0.32
at ion
ific
Spec
e
W hit
ECE
0.31
/
SA E

0.3
0.3 0.31 0.32 0.33 0.34 0.35 0.36
x

Figure 7a. Color bin structure in CIE 1931 color space for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C.

0.38
1E 1F

0.37

0.36

0.35
y

0.34

0.33

0.32

0.31

0.3
0.3 0.31 0.32 0.33 0.34 0.35 0.36
x

Figure 7b. Additional color bin structure in CIE 1931 color space for LUXEON Altilon SMD at 1000mA, 20ms MP, Tc=85°C.

Notes for Figures 7a and 7b:

1. Lumileds supports the following bins for LUXEON Altilon SMD: H2 and HC.
2. LUXEON Altilon SMD historical large color notations. Color bins must be ordered by fine bin designators, shown below.
• H2 = 2A, 2B, 2C, 2D
• H3 = 3A, 3B, 3C, 3D
• HC = 1D, 2C, 3B, 4A
• HC=1E, 1F

DS175 LUXEON Altilon SMD Product Datasheet 20181021 ©2018 Lumileds Holding B.V. All rights reserved. 13
Color Codes

Table 6. Color code definitions for LUXEON Altilon SMD at 1000mA 20ms MP, Tc=85°C.

Code x [1, 2] y [1, 2] Typical CCT (K) Code x [1, 2] y [1, 2] Typical CCT (K)

0.3109 0.3382 0.3242 0.3506

0.3161 0.3432 0.3325 0.3579
1A 6390 3A 5680
0.3169 0.3353 0.3325 0.3493
0.3120 0.3306 0.3246 0.3424
0.3120 0.3306 0.3246 0.3424
0.3169 0.3353 0.3325 0.3493
1B 6390 3B [3] 5680
0.3177 0.3277 0.3324 0.3410
0.3131 0.3232 0.3249 0.3344
0.3161 0.3432 0.3325 0.3579
0.3242 0.3506 0.3412 0.3652
1C 6050 3C 5350
0.3246 0.3424 0.3406 0.3562
0.3169 0.3353 0.3325 0.3493
0.3169 0.3353 0.3325 0.3493
0.3246 0.3424 0.3406 0.3562
1D [3] 6050 3D 5350
0.3249 0.3344 0.3401 0.3476
0.3177 0.3277 0.3324 0.3410
0.3109 0.3211 0.3249 0.3344
0.3177 0.3277 0.3324 0.3410
2A 6460 4A [3] 5680
0.3185 0.3203 0.3323 0.3329
0.3120 0.3139 0.3253 0.3266
0.3120 0.3139 0.3253 0.3266
0.3185 0.3203 0.3323 0.3329
2B 6460 4B 5680
0.3192 0.3131 0.3323 0.3251
0.3131 0.3070 0.3256 0.3191
0.3177 0.3277 0.3324 0.3410
0.3249 0.3344 0.3401 0.3476
2C [3] 6050 4C 5350
0.3253 0.3266 0.3396 0.3392
0.3185 0.3203 0.3323 0.3329
0.3185 0.3203 0.3323 0.3329
0.3253 0.3266 0.3396 0.3392
2D 6050 4D 5350
0.3256 0.3191 0.3392 0.3310
0.3192 0.3131 0.3323 0.3251
0.3169 0.3353 0.3208 0.3388
0.3285 0.3458 0.3325 0.3493
1E 5970 1F 5780
0.3288 0.3298 0.3323 0.3329
0.3185 0.3203 0.3219 0.3234
Notes for Table 6:
1. LUXEON Altilon SMD emitters are tested and binned by x and y coordinates.
2. Lumileds maintains a tester tolerance of ±0.005 on x and y coordinates.
3. Color bins 1D, 2C, 3B and 4A are currently supportable. Ask your sales representative about supportability of the different color bins.

DS175 LUXEON Altilon SMD Product Datasheet 20181021 ©2018 Lumileds Holding B.V. All rights reserved. 14
Mechanical Dimensions

ANGULARITY TOLERANCE
2.70 ±0.075* 2.5 at 2 PLACES
0.84 ±0.075* 0.13 0.35 1.05 (2x)
1.06 CL 0.13

0.88
R0.13 (8x) 1.20 (2x)
1.06

3.00 ±0.075*
0.50
ANODE

1.05 (2x)

R0.25 (8x)
2X LIGHT EMITTER 0.45 1.00 (2x) CATHODE
LASER MARK
2.21 0.3x1.1

Figure 8a. Mechanical dimensions for LUXEON Altilon SMD 1x2.

ANGULARITY TOLERANCE
2.5 at 3 PLACES 0.12
3.85 ±0.075*
0.84 ±0.075*
1.06 CL 0.13 0.35 1.63 (2x)

0.88 R0.13 (8x)

1.20 (2x)
1.06
3.00 ±0.075*
ANODE
0.50

1.05 (2x)

R0.25 (8x)
LASER MARK 0.55 1.53 (2x)
B 3X LIGHT EMITTER CATHODE
3.36 0.3x1.1

Figure 8b. Mechanical dimensions for LUXEON Altilon SMD 1x3.

Notes for Figures 8a and 8b:

1. Drawings are not to scale.
2. All dimensions are in millimeters.

DS175 LUXEON Altilon SMD Product Datasheet 20181021 ©2018 Lumileds Holding B.V. All rights reserved. 15
 ANGULARITY TOLERANCE
2.5 at 4 PLACES
5.00 ±0.075* 0.42
0.84 ±0.075*
1.06 CL 0.13 0.50 1.83 (2x)

0.88
R0.13 (8x)
1.20 (2x)
1.06

3.00 ±0.075* ANODE 0.50

1.05 (2x)

R0.25 (8x)
4X LIGHT EMITTER 0.65 1.76 (2x) CATHODE
LASER MARK
4.51 0.3x1.1

Figure 8c. Mechanical dimensions for LUXEON Altilon SMD 1x4.

ANGULARITY TOLERANCE
2.5 at 5 PLACES
6.15 ±0.075*
0.58 0.50 2.25 (2x)
0.84 ±0.075*
1.06 CL 0.13

0.88
R0.13 (8x)
1.20 (2x)
1.06

3.00 ±0.075* ANODE

0.50

1.05 (2x)

R0.25 (8x) 0.75 2.13 (2x) CATHODE

LASER MARK
5.66 5X LIGHT EMITTER 0.3x1.1

Figure 8d. Mechanical dimensions for LUXEON Altilon SMD 1x5.

Notes for Figures 8c and 8d:

1. Drawings are not to scale.
2. All dimensions are in millimeters.

DS175 LUXEON Altilon SMD Product Datasheet 20181021 ©2018 Lumileds Holding B.V. All rights reserved. 16
Reflow Soldering Guidelines

Figure 9. Visualization of the acceptable reflow temperature profile as specified in Table 7.

Table 7. Reflow profile characteristics for LUXEON Altilon SMD.

PROFILE FEATURE Lead Free Assembly

Preheat Minimum Temperature (Tsmin) 150°C

Preheat Maximum Temperature (Tsmax) 200°C
Preheat Time (tsmin to tsmax) 60 to 180 seconds
Ramp-Up Rate (Tsmax to Tp) 3°C / second maximum
Liquidus Temperature (TL) 217°C
Time Maintained Above Temperature TL (tL) 60 to 150 seconds
Peak / Classification Temperature (Tp) 260°C
Time Within 5°C of Actual Temperature (tp) 20 to 40 seconds
Ramp-Down Rate 6°C / second maximum
Time 25°C to Peak Temperature 8 minutes maximum
Notes for Table 7:
1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body.

JEDEC Moisture Sensitivity

Table 8. Moisture sensitivity levels for LUXEON Altilon SMD.
Floor Life
level
TIme Conditions
1 Unlimited ≤30°C / 85% RH

DS175 LUXEON Altilon SMD Product Datasheet 20181021 ©2018 Lumileds Holding B.V. All rights reserved. 17
Solder Pad Design
Details for recommended solder pad designs that provide low thermal resistance will be published in a separate application brief.
These recommendations are not intended to represent specifications for soldering LUXEON Altilon SMD LEDs.

Thermal Thermal

Anode Cathode

Figure 10. Recommended PCB solder pad layout for LUXEON Altilon SMD.

Notes for Figure 10:

1. All dimensions are in millimeters.
2. The thermal pads are electrically isolated from the anode and cathode contact pads.

Packaging Information

Pocket Tape Dimensions

A A

Ao: 3.25±0.10
Bo: 2.95±0.10
Ko: 1.30±0.10
K1: -
Pitch: 8.00±0.10

Width: 12.00±0.15

Figure 11a. Pocket tape dimensions for LUXEON Altilon SMD 1x2.
Notes for Figure 11a:
1. Drawings are not to scale.
2. All dimensions are in millimeters.

DS175 LUXEON Altilon SMD Product Datasheet 20181021 ©2018 Lumileds Holding B.V. All rights reserved. 18
 B

A A

Ao: 3.25±0.10
Bo: 4.10±0.10
Ko: 1.30±0.10
K1: -
Pitch: 8.00±0.10

Width: 12.00±0.15

Figure 11b. Pocket tape dimensions for LUXEON Altilon SMD 1x3.

A A

Ao: 3.25±0.10
Bo: 5.25±0.10
Ko: 1.30±0.10
K1: -
Pitch: 8.00±0.10

Width: 12.00±0.15

Figure 11c. Pocket tape dimensions for LUXEON Altilon SMD 1x4.
Notes for Figures 11b and 11c:
1. Drawings are not to scale.
2. All dimensions are in millimeters.

DS175 LUXEON Altilon SMD Product Datasheet 20181021 ©2018 Lumileds Holding B.V. All rights reserved. 19
 B

A A

Ao: 3.25±0.10
Bo: 6.40±0.10
Ko: 1.30±0.10
K1: -
Pitch: 8.00±0.10

Width: 12.00±0.15

Figure 11d. Pocket tape dimensions for LUXEON Altilon SMD 1x5.
Notes for Figure 11d:
1. Drawings are not to scale.
2. All dimensions are in millimeters.

Reel Dimensions

SPI=1000

Figure 12a. Reel dimensions for LUXEON Altilon SMD 1x2.

Notes for Figure 12a:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
3. SPI=1000 (SPI is the number of LEDs per reel). For Altilon SMD, all reels ship with 1000 LEDs.

DS175 LUXEON Altilon SMD Product Datasheet 20181021 ©2018 Lumileds Holding B.V. All rights reserved. 20
 SPI=1000

Figure 12b. Reel dimensions for LUXEON Altilon SMD 1x3.

SPI=1000

Figure 12c. Reel dimensions for LUXEON Altilon SMD 1x4.

Notes for Figures 12b and 12c:

1. Drawings are not to scale.
2. All dimensions are in millimeters.
3. SPI=1000 (SPI is the number of LEDs per reel). For Altilon SMD, all reels ship with 1000 LEDs.

DS175 LUXEON Altilon SMD Product Datasheet 20181021 ©2018 Lumileds Holding B.V. All rights reserved. 21
 SPI=1000

Figure 12d. Reel dimensions for LUXEON Altilon SMD 1x5.

Notes for Figure 12d:

1. Drawings are not to scale.
2. All dimensions are in millimeters.
3. SPI=1000 (SPI is the number of LEDs per reel). For Altilon SMD, all reels ship with 1000 LEDs.

DS175 LUXEON Altilon SMD Product Datasheet 20181021 ©2018 Lumileds Holding B.V. All rights reserved. 22
Product Labeling
LUXEON Altilon SMD LEDs are packaged in moisture barrier bags on reels. Both moisture barrier bag and reels have printed
information providing part numbers with CAT codes that indicate luminous flux, color and forward voltage bins.

Figure 13. Example of a product label for LUXEON Altilon SMD.

Notes for Figure 13 – Outer Box Label descriptions for customer use:
Field labels not described are for Lumileds internal use only.
1. Total number of LED emitters in a shipment box.
2. Lumileds part number
3. Customer part number for custom requests only.
4. LED test date in YYWW format.
5. Unique product lot identification number. This number is required for traceability purposes.
6. Country code of origin of manufacturing of part (e.g. MY for Malaysia, CN for China) according to ISO 3166-1 alpha-2 document.
7. Product bin 4-digit alphanumeric CAT code.

DS175 LUXEON Altilon SMD Product Datasheet 20181021 ©2018 Lumileds Holding B.V. All rights reserved. 23
About Lumileds
Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with
them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions
company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the
inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,
quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is
making the world better, safer, more beautiful—with light.

To learn more about our lighting solutions, visit lumileds.com.

©2018 Lumileds Holding B.V. All rights reserved. Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages,
LUXEON is a registered trademark of the Lumileds direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds
Holding B.V. in the United States and other countries. Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials
and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates
lumileds.com warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding
B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and
user agreement with the download or use of the provided materials, information and data. A listing of Lumileds
product/patent coverage may be accessed at lumileds.com/patents.
DS175 LUXEON Altilon SMD
Product Datasheet 20181021