ILLUMINATION

LUXEON C ES Color Line

Maximum density and minimal area for
complex color arrays
LUXEON C ES Color Line is designed specifically for use in large LED

arrays under a single optic . Its larger die and small package enable

the total array area to be minimized, and LED arrangement optimized

while delivering high light output. The three-stripe pad enables

complex electronic circuits and provides superior thermal management

connections. For entertainment, architectural, and EVL applications where

significant output from large arrays is desired, LUXEON C ES is the clear

choice.

FEATURES AND BENEFITS PRIMARY APPLICATIONS

Best in class f​ or multi-color array mixing with minimum LED-to-LED spacing
Spotlights
needed for placement​
The 3-stripe footprint, offers the flexibility of design in a complex routing as it shortened
Wall Wash
electrodes for routing between LEDs while keeping LEDs maximally close-packed​
Large die in a small package provides high flux, low Vf, and low Pthermal​ Floodlights

High drive current enables output to be maximized and LED count minimized​ Landscape Lighting
Large thermal pad allows high drive currents and makes it possible to create
close-packed LED clusters​ More...

Superior reliability from a proven, robust package

RoHS
COMPLIANT
No. E352519
DS565 LUXEON C ES Color Line Product Datasheet ©2025 Lumileds Holding B.V. All rights reserved.
Table of Contents

General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Color Bin Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Peak Wavelength Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Dominant Wavelength Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

DS565 LUXEON C ES Color Line Product Datasheet 20250113 ©2025 Lumileds Holding B.V. All rights reserved. i
General Product Information

Product Test Conditions

LUXEON C ES Color Line LEDs are tested and binned with a DC drive current of 1000mA at a junction temperature, Tj, of 85°C.

Part Number Nomenclature

Part numbers for LUXEON C ES Color Line follow the convention below:

L 1 C 2 – A A A 1 0 0 0 0 0 0 0 0 0

Where:

A A A – designates color (DRD=Deep Red, RED=Red, PCA=PC Amber, MNT=Mint, LME=Lime, GRN=Green,
CYN=Cyan, BLU=Blue, RYL=Royal Blue)

Therefore, the following part number is used for a LUXEON C ES Red LED:

L 1 C 2 – R E D 1 0 0 0 0 0 0 0 0 0

Lumen Maintenance
Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long-
term performance of this product.

Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON C ES
Color Line is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment,
namely the RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the
following restricted materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or
polybrominated diphenyl ethers (PBDE).

DS565 LUXEON C ES Color Line Product Datasheet 20250113 ©2025 Lumileds Holding B.V. All rights reserved. 2
Performance Characteristics

Product Selection Guide

Table 1. Product performance of LUXEON C ES Colors at specified test current 1000mA, Tj=85°C.

DOMINANTor LUMINIOUS FLUX (lm) or

COLOR PEAK WAVELENGTH [1] (nm) RADIOMETRIC POWER [2] (mW) PART NUMBER
MINIMUM MAXIMUM MINIMUM TYPICAL
Deep Red 655 675 935 1100 L1C2-DRD1000000000
Red 624 634 106 125 L1C2-RED1000000000
PC Amber – – 264 310 L1C2-PCA1000000000
Mint – – 391 460 L1C2-MNT1000000000
Lime – – 425 500 L1C2-LME1000000000
Green 520 540 298 350 L1C2-GRN1000000000
Cyan 490 510 204 240 L1C2-CYN1000000000
Blue 465 485 94 110 L1C2-BLU1000000000
Royal Blue 440 460 1275 1500 L1C2-RYL1000000000
Notes for Table 1:
1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements. PC Amber, Mint and Lime are binned by chromaticity coordinates. Deep Red and Royal Blue are binned by peak
wavelength. All other colors are binned by dominant wavelength.
2. Deep Red and Royal Blue are binned by radiometric power. All other colors are binned by luminous flux.

Optical Characteristics
Table 2. Optical characteristics for LUXEON C ES Colors at 1000mA, Tj=85°C.
TYPICAL TEMPERATURE
TYPICAL SPECTRAL TYPICAL TOTAL TYPICAL
COEFFICIENT OF DOMINANT
COLOR PART NUMBER HALF-WIDTH [1] INCLUDED VIEWING
or PEAK WAVELENGTH
(nm) ANGLE [2] ANGLE [3]
(nm/°C)
Deep Red L1C2-DRD1000000000 22 0.16 144 116
Red L1C2-RED1000000000 18 0.06 142 119
PC Amber L1C2-PCA1000000000 76 -0.01 145 129
Mint L1C2-MNT1000000000 116 0.00 138 125
Lime L1C2-LME1000000000 105 0.01 146 131
Green L1C2-GRN1000000000 33 0.04 147 123
Cyan L1C2-CYN1000000000 28 0.03 146 122
Blue L1C2-BLU1000000000 27 0.02 147 123
Royal Blue L1C2-RYL1000000000 21 0.04 143 124
Notes for Table 2:
1. Spectral half-width is the spectral bandwidth at 50% of the peak intensity.
2. Total angle at which 90% of total luminous flux is captured.
3. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.

DS565 LUXEON C ES Color Line Product Datasheet 20250113 ©2025 Lumileds Holding B.V. All rights reserved. 3
Electrical and Thermal Characteristics
Table 3. Electrical and thermal characteristics for LUXEON C ES Color Line at 1000mA, Tj=85°C.

FORWARD VOLTAGE [1] (Vf) TYPICAL TEMPERATURE TYPICAL THERMAL

COLOR PART NUMBER COEFFICIENT OF FORWARD RESISTANCE—JUNCTION
MINIMUM TYPICAL MAXIMUM VOLTAGE [2] (mV/°C) TO SOLDER PAD (°C/W)

Deep Red L1C2-DRD1000000000 2.00 2.20 2.80 -0.7 1.4

Red L1C2-RED1000000000 2.00 2.20 2.80 -1.5 1.8
PC Amber L1C2-PCA1000000000 2.50 2.95 3.30 -1.8 2.6
Mint L1C2-MNT1000000000 2.50 2.95 3.30 -1.8 2.2
Lime L1C2-LME1000000000 2.50 2.95 3.30 -1.8 2.2
Green L1C2-GRN1000000000 2.70 3.20 3.50 -3.2 2.8
Cyan L1C2-CYN1000000000 2.70 3.37 3.50 -3.0 2.6
Blue L1C2-BLU1000000000 2.70 3.37 3.50 -3.9 2.3
Royal Blue L1C2-RYL1000000000 2.50 2.95 3.30 -1.8 1.7
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.
2. Measured between 25°C and 85°C.

Absolute Maximum Ratings

Table 4. Absolute maximum ratings for LUXEON C ES Color Line.

MAXIMUM PERFORMANCE
PARAMETER
RED AND PC GREEN AND BLUE AND ROYAL
DEEP RED MINT AND LIME
AMBER CYAN BLUE
DC Forward Current [1, 2] 1400mA 2100mA 2100mA 2100mA 2450mA
Peak Pulsed Forward Current [1, 3]
1750mA 2600mA 2600mA 2600mA 3000mA
LED Junction Temperature [1] (DC & Pulse) 135°C 135°C 135°C 135°C 135°C
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 1A
LED Storage Temperature -40°C to 135°C
Soldering Temperature JEDEC 020c 260°C
Allowable Reflow Cycles 3
Reverse Voltage (Vreverse) LUXEON LEDs are not designed to be driven in reverse bias
Notes for Table 4:
1. Proper current derating must be observed to maintain junction temperature below the maximum allowable junction temperature.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:
– The frequency of the ripple current is 100Hz or higher
– The average current for each cycle does not exceed the maximum allowable DC forward current
– The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current
3. At 10% duty cycle with pulse width of 10ms.

DS565 LUXEON C ES Color Line Product Datasheet 20250113 ©2025 Lumileds Holding B.V. All rights reserved. 4
Characteristic Curves

Spectral Power Distribution Characteristics

Figure 1a. Typical normalized SPD vs. wavelength for LUXEON C ES Direct Colors at 1000mA, Tj=85ºC.

Figure 1b. Typical normalized SPD vs. wavelength for LUXEON C ES Phosphor Converted Colors at 1000mA, Tj=85ºC.

DS565 LUXEON C ES Color Line Product Datasheet 20250113 ©2025 Lumileds Holding B.V. All rights reserved. 5
Light Output Characteristics

Figure 2a. Typical normalized radiometric power vs. junction temperature for LUXEON C ES Deep Red at 1000mA.

Figure 2b. Typical normalized luminous flux vs. junction temperature for LUXEON C ES Red at 1000mA.

DS565 LUXEON C ES Color Line Product Datasheet 20250113 ©2025 Lumileds Holding B.V. All rights reserved. 6
 Figure 2c. Typical normalized luminous flux vs. junction temperature for LUXEON C ES PC Amber, Mint and Lime at 1000mA.

Figure 2d. Typical normalized luminous flux vs. junction temperature for LUXEON C ES Green, Cyan and Blue at 1000mA.

DS565 LUXEON C ES Color Line Product Datasheet 20250113 ©2025 Lumileds Holding B.V. All rights reserved. 7
 Figure 2e. Typical normalized radiometric power vs. junction temperature for LUXEON C ES Royal Blue at 1000mA.

Figure 3a. Typical normalized radiometric power vs. forward current for LUXEON C ES Deep Red at Tj=85ºC.

DS565 LUXEON C ES Color Line Product Datasheet 20250113 ©2025 Lumileds Holding B.V. All rights reserved. 8
 Figure 3b. Typical normalized luminous flux vs. forward current for LUXEON C ES Red at Tj=85ºC.

Figure 3c. Typical normalized luminous flux vs. forward current for LUXEON C ES PC Amber, Mint and Lime at Tj=85ºC.

DS565 LUXEON C ES Color Line Product Datasheet 20250113 ©2025 Lumileds Holding B.V. All rights reserved. 9
 Figure 3d. Typical normalized luminous flux vs. forward current for LUXEON C ES Green, Cyan and Blue at Tj=85ºC.

Figure 3e. Typical normalized radiometric power vs. forward current for LUXEON C ES Royal Blue at Tj=85ºC.

DS565 LUXEON C ES Color Line Product Datasheet 20250113 ©2025 Lumileds Holding B.V. All rights reserved. 10
Forward Current Characteristics

Figure 4a. Typical forward current vs. forward voltage for LUXEON C ES Deep Red and Red at Tj=85ºC.

Figure 4b. Typical forward current vs. forward voltage for LUXEON C ES PC Amber, Mint and Lime at Tj=85ºC.

DS565 LUXEON C ES Color Line Product Datasheet 20250113 ©2025 Lumileds Holding B.V. All rights reserved. 11
 Figure 4c. Typical forward current vs. forward voltage for LUXEON C ES Green, Cyan, Blue and Royal Blue at Tj=85ºC.

DS565 LUXEON C ES Color Line Product Datasheet 20250113 ©2025 Lumileds Holding B.V. All rights reserved. 12
Radiation Pattern Characteristics

Figure 5a. Typical radiation pattern for LUXEON C ES Deep Red, Red, Green, Cyan and Blue at 1000mA, Tj=85°C.

Figure 5b. Typical radiation pattern for LUXEON C ES PC Amber, Mint, Lime and Royal Blue at 1000mA, Tj=85°C.

DS565 LUXEON C ES Color Line Product Datasheet 20250113 ©2025 Lumileds Holding B.V. All rights reserved. 13
 Figure 6a. Typical polar radiation pattern for LUXEON C ES Deep Red, Red, Green, Cyan and Blue at 1000mA, Tj=85°C.

Figure 6b. Typical polar radiation pattern for LUXEON C ES PC Amber, Mint, Lime and Royal Blue at 1000mA, Tj=85°C.

DS565 LUXEON C ES Color Line Product Datasheet 20250113 ©2025 Lumileds Holding B.V. All rights reserved. 14
Product Bin and Labeling Definitions

Decoding Product Bin Labeling

In the manufacturing of semiconductor products, there are variations in performance around the average values given in the
technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or
dominant wavelength and forward voltage.

LUXEON C ES Color Line LEDs are labeled using a 4-digit alphanumeric CAT code following the format below.

A B C D

A – designates luminous flux/radiometric power bin (luminous flux bin example: A=90 to 95 lm, B= 95 to 100 lm;
radiometric power bin example: Deep Red C=1040 to 1100mW, Royal Blue G=1320 to 1390 mW)

B C – designates color bin, peak wavelength bin or dominant wavelength bin (peak wavelength bin example: Deep
Red 10=655 to 665nm; dominant wavelength bin example: Red 40=624 to 634 nm)

D – designates forward voltage bin (example: A=1.80 to 2.00 V, B=2.00 to 2.20 V)

Therefore, a LUXEON C ES Red LED with a lumen range of 110 to 115 lm, a dominant wavelength of 624 to 634 nm and a forward
voltage range of 2.20 to 2.40 V has the following CAT code:

E 4 0 C

DS565 LUXEON C ES Color Line Product Datasheet 20250113 ©2025 Lumileds Holding B.V. All rights reserved. 15
Luminous Flux Bins
Table 5 lists the standard photometric luminous flux bins for LUXEON C ES Color Lines emitters. Although several bins are
outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in
all CCTs.

Table 5. Luminous flux bin definitions for LUXEON C ES Color Lines

LUMINOUS FLUX [1] (lm)
BIN
MINIMUM MAXIMUM
A 90 95
B 95 100
C 100 105
D 105 110
E 110 115
F 115 120
G 120 130
H 130 140
J 140 150
K 150 160
L 160 180
M 180 200
N 200 220
P 220 240
Q 240 260
R 260 280
S 280 300
T 300 320
U 320 350
V 350 380
W 380 410
X 410 440
Y 440 480
Z 480 520
1 520 560
2 560 600
Notes for Table 5:
1. Lumileds maintains a tolerance of ±6.5% on luminous flux measurements.

Radiometric Power Bins

Table 6. Radiometric power bin definitions for LUXEON C ES Deep Red and Royal Blue.
RADIOMETRIC POWER [1] (mW)
COLOR BIN
MINIMUM MAXIMUM
A 900 970
B 970 1040
Deep Red
C 1040 1110
D 1110 1180
H 1390 1460
J 1460 1530
Royal Blue
K 1530 1600
L 1600 1670
Notes for Table 6:
1. Lumileds maintains a tolerance of ±6.5% for radiometric power measurements.

DS565 LUXEON C ES Color Line Product Datasheet 20250113 ©2025 Lumileds Holding B.V. All rights reserved. 16
Color Bin Definitions

Figure 7. Color bin structure for LUXEON C ES PC Amber for Table 7

0.59

0.57
Lime Bin 10
0.55

Mint Bin 22
0.53

0.51
Mint Bin 24

0.49
y
0.47

0.45

0.43

0.41

0.39

0.37
0.31 0.33 0.35 0.37 0.39 0.41 0.43

Figure 8. Color bin structure for LUXEON C ES Mint and Lime for Table 7

DS565 LUXEON C ES Color Line Product Datasheet 20250113 ©2025 Lumileds Holding B.V. All rights reserved. 17
Table 7. Color bin definitions for LUXEON C PC Amber, Mint, Lime and PC Blue.

COLOR PART NUMBER BIN x y

0.5622 0.4372
0.5576 0.4326
PC Amber L1C2-PCA1000000000 20
0.5775 0.4132
0.5843 0.4151
0.3972 0.4986
0.3830 0.5077
22
0.3703 0.4825
0.3846 0.4749
Mint L1C2-MNT1000000000
0.3846 0.4749
0.3703 0.4825
24
0.3608 0.4639
0.3752 0.4572
0.3819 0.5055
0.4191 0.5790
Lime L1C2-LME1000000000 10
0.4327 0.5655
0.3972 0.4986
Notes for Table 7:
1. Lumileds maintains a tolerance of ±0.005 on x and y color coordinates measurements.

Peak Wavelength Bins

Table 9. Peak wavelength bin definitions for LUXEON C ES Deep Red and Royal Blue.
PEAK WAVELENGTH (nm)
COLOR PART NUMBER BIN
MINIMUM MAXIMUM

10 655 665
Deep Red L1C2-DRD1000000000
20 665 675
30 440 445
40 445 450
Royal Blue L1C2-RYL1000000000
50 450 455
60 455 460
Notes for Table 9:
1. Lumileds maintains a tolerance of ±2.0nm on peak wavelength measurements.

DS565 LUXEON C ES Color Line Product Datasheet 20250113 ©2025 Lumileds Holding B.V. All rights reserved. 18
Dominant Wavelength Bins
Table 10. Dominant wavelength bin definitions for LUXEON C ES Red, Green, Cyan and Blue at 1000mA, Tj=85°C.
DOMINANT WAVELENGTH[1] (nm)
COLOR PART NUMBER BIN
MINIMUM MAXIMUM

Red L1C2-RED1000000000 40 624.0 634.0

10 520.0 525.0
20 525.0 530.0
Green L1C2-GRN1000000000
30 530.0 535.0
40 535.0 540.0
10 490.0 496.0
20 496.0 500.0
Cyan L1C2-CYN1000000000
30 500.0 505.0
40 505.0 510.0
10 460.0 465.0
20 465.0 470.0
Blue L1C2-BLU1000000000 30 470.0 475.0
40 475.0 480.0
50 480.0 485.0
Notes for Table 9:
1. Lumileds maintains a tolerance of ±0.5nm on dominant wavelength measurements.

DS565 LUXEON C ES Color Line Product Datasheet 20250113 ©2025 Lumileds Holding B.V. All rights reserved. 19
Forward Voltage Bins
Table 11. Forward voltage bin definitions for LUXEON C ES Color Line.
FORWARD VOLTAGE [1] (VF)
BIN
MINIMUM MAXIMUM
A 1.80 2.00
B 2.00 2.20
C 2.20 2.40
D 2.40 2.60
E 2.60 2.80
F 2.80 3.00
G 3.00 3.20
H 3.20 3.40
J 3.40 3.60
Notes for Table 11:
1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.

Mechanical Dimensions

Figure 12. Mechanical dimensions for LUXEON C ES Color Line.

Notes for Figure 12:

1. Drawings are not to scale.
2. All dimensions are in millimeters.

DS565 LUXEON C ES Color Line Product Datasheet 20250113 ©2025 Lumileds Holding B.V. All rights reserved. 20
Reflow Soldering Guidelines

tp
Tp

Critical Zone
Ramp-up TL to Tp

TL
tL
Temperature

Tsmax

Tsmin
Ramp-down
ts
Preheat Area

25
Time 25ºC to Peak
Time JEDEC J-STD-020D

Figure 13. Visualization of the acceptable reflow temperature profile as specified in Table 12.

Table 12. Reflow profile characteristics for LUXEON C ES Color Line.

PROFILE FEATURE LEAD FREE ASSEMBLY

Preheat Minimum Temperature (Tsmin) 150°C

Preheat Maximum Temperature (Tsmax) 200°C
Preheat Time (tsmin to tsmax) 60 to 120 seconds
Ramp-Up Rate (TL to Tp) 3°C / second maximum
Liquidous Temperature (TL) 217°C
Time Maintained Above Temperature TL (tL) 60 to 150 seconds
Peak / Classification Temperature (Tp) 260°C
Time Within 5°C of Actual Peak Temperature (tp) 20 to 40 seconds
Ramp-Down Rate (Tp to TL) 6°C / second maximum
Time 25°C to Peak Temperature 8 minutes maximum

JEDEC Moisture Sensitivity

Table 13. Moisture sensitivity levels for LUXEON C ES Color Line.
FLOOR LIFE SOAK REQUIREMENTS STANDARD
LEVEL
TIME CONDITIONS TIME CONDITIONS
1 Unlimited ≤30°C / 85% RH 168 Hours +5 / -0 85°C / 85% RH

DS565 LUXEON C ES Color Line Product Datasheet 20250113 ©2025 Lumileds Holding B.V. All rights reserved. 21
Solder Pad Design

Figure 14. Recommended PCB solder pad layout for LUXEON C ES Color Line.

Notes for Figure 14:

1. Drawings are not to scale.
2. All dimensions are in millimeters.
3. The drawing above shows the recommended solder pad layout on Printed Circuit Board (PCB)..

DS565 LUXEON C ES Color Line Product Datasheet 20250113 ©2025 Lumileds Holding B.V. All rights reserved. 22
Packaging Information

Pocket Tape Dimensions

Figure 15. Pocket Tape dimensions for LUXEON C ES Color Line.

Notes for Figure 15:

1. Drawings are not to scale.
2. All dimensions are in millimeters.

Reel Dimensions

Figure 16. Reel dimensions for LUXEON C ES Color Line.

Notes for Figure 16:

1. Drawings are not to scale.
2. All dimensions are in millimeters.

DS565 LUXEON C ES Color Line Product Datasheet 20250113 ©2025 Lumileds Holding B.V. All rights reserved. 23
About Lumileds
Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with
them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions
company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the
inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,
quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is
making the world better, safer, more beautiful—with light.

To learn more about our lighting solutions, visit lumileds.com.

©2025 Lumileds Holding B.V. All rights reserved. Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages,
LUXEON is a registered trademark of the Lumileds direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds
Holding B.V. in the United States and other countries. Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials
and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates warrants
lumileds.com or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its
affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agree-
ment with the download or use of the provided materials, information and data. A listing of Lumileds product/
patent coverage may be accessed at lumileds.com/patents.
DS565 LUXEON C ES Color Line
Product Datasheet 20250113