1N4001, 1N4002, 1N4003,
1N4004, 1N4005, 1N4006,
1N4007
Axial Lead Standard
Recovery Rectifiers
http://onsemi.com
This data sheet provides information on subminiature size, axial
lead mounted rectifiers for general−purpose low−power applications.
LEAD MOUNTED RECTIFIERS
Features
50−1000 VOLTS
• Shipped in Plastic Bags, 1000 per bag
• Available Tape and Reeled, 5000 per reel, by adding a “RL” suffix to DIFFUSED JUNCTION
the part number
• Available in Fan−Fold Packaging, 3000 per box, by adding a “FF”
suffix to the part number
• Pb−Free Packages are Available
Mechanical Characteristics
• Case: Epoxy, Molded
• Weight: 0.4 gram (approximately)
CASE 59−10
• Finish: All External Surfaces Corrosion Resistant and Terminal AXIAL LEAD
Leads are Readily Solderable PLASTIC
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds, 1/16 in. from case
• Polarity: Cathode Indicated by Polarity Band
MARKING DIAGRAM
A
1N400x
YYWWG
G
A = Assembly Location
1N400x = Device Number
x = 1, 2, 3, 4, 5, 6 or 7
YY = Year
WW = Work Week
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information on page 5 of
this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2012 1 Publication Order Number:
October, 2012 − Rev. 13 1N4001/D
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007
MAXIMUM RATINGS
Rating Symbol 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 Unit
†Peak Repetitive Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Working Peak Reverse Voltage VRWM
DC Blocking Voltage VR
†Non−Repetitive Peak Reverse Voltage VRSM 60 120 240 480 720 1000 1200 V
(halfwave, single phase, 60 Hz)
†RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
†Average Rectified Forward Current IO 1.0 A
(single phase, resistive load,
60 Hz, TA = 75°C)
†Non−Repetitive Peak Surge Current IFSM 30 (for 1 cycle) A
(surge applied at rated load conditions)
Operating and Storage Junction TJ −65 to +175 °C
Temperature Range Tstg
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
†Indicates JEDEC Registered Data
THERMAL CHARACTERISTICS
Rating Symbol Max Unit
Maximum Thermal Resistance, Junction−to−Ambient RqJA Note 1 °C/W
ELECTRICAL CHARACTERISTICS†
Rating Symbol Typ Max Unit
Maximum Instantaneous Forward Voltage Drop, (iF = 1.0 Amp, TJ = 25°C) vF 0.93 1.1 V
Maximum Full−Cycle Average Forward Voltage Drop, (IO = 1.0 Amp, TL = 75°C, 1 inch leads) VF(AV) − 0.8 V
Maximum Reverse Current (rated DC voltage) IR mA
(TJ = 25°C) 0.05 10
(TJ = 100°C) 1.0 50
Maximum Full−Cycle Average Reverse Current, (IO = 1.0 Amp, TL = 75°C, 1 inch leads) IR(AV) − 30 mA
†Indicates JEDEC Registered Data
http://onsemi.com
2
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007
10 1.0E−04
IF, FORWARD CURRENT (A)
IR, REVERSE CURRENT (A)
1.0E−05 TC = 150°C
1.0E−06 TC = 100°C
1 TC = 100°C
1.0E−07
TC = 150°C
1.0E−08
TC = 25°C
TC = 25°C
0.1 1.0E−09
0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 0 100 200 300 400 500 600 700 800 900 1000
VF, INSTANTANEOUS FORWARD VOLTAGE (V) VR, REVERSE VOLTAGE (V)
Figure 1. Typical Forward Voltage Figure 2. Typical Reverse Current
100
TJ = 25°C
C, CAPACITANCE (pF)
10
1
0 20 40 60 80 100 120 140 160 180 200
VR, REVERSE VOLTAGE (V)
Figure 3. Typical Capacitance
http://onsemi.com
3
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007
NOTE 1. − AMBIENT MOUNTING DATA
Data shown for thermal resistance, junction−to−ambient
(RqJA) for the mountings shown is to be used as typical
guideline values for preliminary engineering or in case the
tie point temperature cannot be measured.
TYPICAL VALUES FOR RqJA IN STILL AIR
Mounting Lead Length, L
Method 1/8 1/4 1/2 Units
1 52 65 72 °C/W
2 RqJA 67 80 87 °C/W
3 50 °C/W
MOUNTING METHOD 1
L L
ÉÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉÉ
MOUNTING METHOD 2
ÉÉÉÉÉÉÉÉÉÉÉÉ
L L
ÉÉÉÉÉÉÉÉÉÉÉÉ Vector Pin Mounting
MOUNTING METHOD 3
ÉÉ
ÉÉ L = 3/8 ″
ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ Board Ground Plane
P.C. Board with
1−1/2 ″ X 1−1/2 ″ Copper Surface
http://onsemi.com
4
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007
ORDERING INFORMATION
Device Package Shipping†
1N4001 Axial Lead* 1000 Units/Bag
1N4001G Axial Lead* 1000 Units/Bag
(Pb−Free)
1N4001FF Axial Lead* 3000 Units/Box
1N4001FFG Axial Lead* 3000 Units/Box
(Pb−Free)
1N4001RL Axial Lead* 5000/Tape & Reel
1N4001RLG Axial Lead* 5000/Tape & Reel
(Pb−Free)
1N4002 Axial Lead* 1000 Units/Bag
1N4002G Axial Lead* 1000 Units/Bag
(Pb−Free)
1N4002FF Axial Lead* 3000 Units/Box
1N4002FFG Axial Lead* 3000 Units/Box
(Pb−Free)
1N4002RL Axial Lead* 5000/Tape & Reel
1N4002RLG Axial Lead* 5000/Tape & Reel
(Pb−Free)
1N4003 Axial Lead* 1000 Units/Bag
1N4003G Axial Lead* 1000 Units/Bag
(Pb−Free)
1N4003FF Axial Lead* 3000 Units/Box
1N4003FFG Axial Lead* 3000 Units/Box
(Pb−Free)
1N4003RL Axial Lead* 5000/Tape & Reel
1N4003RLG Axial Lead* 5000/Tape & Reel
(Pb−Free)
1N4004 Axial Lead* 1000 Units/Bag
1N4004G Axial Lead* 1000 Units/Bag
(Pb−Free)
1N4004FF Axial Lead* 3000 Units/Box
1N4004FFG Axial Lead* 3000 Units/Box
(Pb−Free)
1N4004RL Axial Lead* 5000/Tape & Reel
1N4004RLG Axial Lead* 5000/Tape & Reel
(Pb−Free)
1N4005 Axial Lead* 1000 Units/Bag
1N4005G Axial Lead* 1000 Units/Bag
(Pb−Free)
1N4005FF Axial Lead* 3000 Units/Box
1N4005FFG Axial Lead* 3000 Units/Box
(Pb−Free)
1N4005RL Axial Lead* 5000/Tape & Reel
1N4005RLG Axial Lead* 5000/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*This package is inherently Pb−Free.
http://onsemi.com
5
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007
ORDERING INFORMATION
Device Package Shipping†
1N4006 Axial Lead* 1000 Units/Bag
1N4006G Axial Lead* 1000 Units/Bag
(Pb−Free)
1N4006FF Axial Lead* 3000 Units/Box
1N4006FFG Axial Lead* 3000 Units/Box
(Pb−Free)
1N4006RL Axial Lead* 5000/Tape & Reel
1N4006RLG Axial Lead* 5000/Tape & Reel
(Pb−Free)
1N4007 Axial Lead* 1000 Units/Bag
1N4007G Axial Lead* 1000 Units/Bag
(Pb−Free)
1N4007FF Axial Lead* 3000 Units/Box
1N4007FFG Axial Lead* 3000 Units/Box
(Pb−Free)
1N4007RL Axial Lead* 5000/Tape & Reel
1N4007RLG Axial Lead* 5000/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*This package is inherently Pb−Free.
http://onsemi.com
6
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007
PACKAGE DIMENSIONS
AXIAL LEAD
CASE 59−10
ISSUE U
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
K D
3. ALL RULES AND NOTES ASSOCIATED WITH
JEDEC DO−41 OUTLINE SHALL APPLY
4. POLARITY DENOTED BY CATHODE BAND.
F 5. LEAD DIAMETER NOT CONTROLLED WITHIN F
DIMENSION.
INCHES MILLIMETERS
A
DIM MIN MAX MIN MAX
A 0.161 0.205 4.10 5.20
POLARITY INDICATOR B 0.079 0.106 2.00 2.70
OPTIONAL AS NEEDED F D 0.028 0.034 0.71 0.86
(SEE STYLES)
F −−− 0.050 −−− 1.27
K K 1.000 −−− 25.40 −−−
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free ON Semiconductor Website: www.onsemi.com
Literature Distribution Center for ON Semiconductor USA/Canada
P.O. Box 5163, Denver, Colorado 80217 USA Europe, Middle East and Africa Technical Support: Order Literature: http://www.onsemi.com/orderlit
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Phone: 421 33 790 2910
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Japan Customer Focus Center For additional information, please contact your local
Email: orderlit@onsemi.com Phone: 81−3−5817−1050 Sales Representative
http://onsemi.com 1N4001/D
7
