Thank you for your interest in onsemi products.

Your technical document begins on the following pages.

Your Feedback is Important to Us!

Please take a moment to participate in our short survey.

At onsemi, we are dedicated to delivering technical content that best
meets your needs.

Help Us Improve – Take the Survey

This survey is intended to collect your feedback, capture any issues you may
encounter, and to provide improvements you would like to suggest.

We look forward to your feedback.

To learn more about onsemi, please visit our website at

www.onsemi.com

onsemi and and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or
subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi
product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without
notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality,
or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all
liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws,
regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/
or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application
by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized
for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for
implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees,
subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative
Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others.
 DATA SHEET
www.onsemi.com

Axial-Lead Glass LEAD MOUNTED RECTIFIERS

Passivated Standard 50−1000 VOLTS
DIFFUSED JUNCTION
Recovery Rectifiers
1N4001, 1N4002, 1N4003,
1N4004, 1N4005, 1N4006,
1N4007
This data sheet provides information on subminiature size, axial
lead mounted rectifiers for general−purpose low−power applications.
CASE 59−10
AXIAL LEAD
Features
PLASTIC
• Shipped in Plastic Bags, 1000 per bag
• Available Tape and Reeled, 5000 per reel, by adding a “RL” suffix to
the part number
• Available in Fan−Fold Packaging, 3000 per box, by adding a “FF” MARKING DIAGRAM
suffix to the part number
• Pb−Free Packages are Available
A
Mechanical Characteristics 1N400x
YYWWG
• Case: Epoxy, Molded G
• Weight: 0.4 gram (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal A = Assembly Location
Leads are Readily Solderable 1N400x = Device Number
• Lead and Mounting Surface Temperature for Soldering Purposes: x = 1, 2, 3, 4, 5, 6 or 7
YY = Year
260°C Max. for 10 Seconds, 1/16 in. from case WW = Work Week
• Polarity: Cathode Indicated by Polarity Band G = Pb−Free Package
(Note: Microdot may be in either location)
*For additional information on our Pb−Free strategy and soldering details, please
download the onsemi Soldering and Mounting Techniques Reference Manual,
SOLDERRM/D. ORDERING INFORMATION
See detailed ordering and shipping information on page 5 of
this data sheet.

NOTE: Some of the devices on this data sheet have been

DISCONTINUED. Please refer to the table on page 5.

© Semiconductor Components Industries, LLC, 2012 1 Publication Order Number:

June, 2024 − Rev. 18 1N4001/D
 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007

MAXIMUM RATINGS
Rating Symbol 1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 Unit
†Peak Repetitive Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Working Peak Reverse Voltage VRWM
DC Blocking Voltage VR
†Non−Repetitive Peak Reverse Voltage VRSM 60 120 240 480 720 1000 1200 V
(halfwave, single phase, 60 Hz)
†RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
†Average Rectified Forward Current IO 1.0 A
(single phase, resistive load,
60 Hz, TA = 75°C)
†Non−Repetitive Peak Surge Current IFSM 30 (for 1 cycle) A
(surge applied at rated load conditions)
Operating and Storage Junction TJ −65 to +150 °C
Temperature Range Tstg
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
†Indicates JEDEC Registered Data

THERMAL CHARACTERISTICS
Rating Symbol Max Unit
Maximum Thermal Resistance, Junction−to−Ambient RqJA Note 1 °C/W

ELECTRICAL CHARACTERISTICS†
Rating Symbol Typ Max Unit
Maximum Instantaneous Forward Voltage Drop, (iF = 1.0 Amp, TJ = 25°C) vF 0.93 1.1 V
Maximum Full−Cycle Average Forward Voltage Drop, (IO = 1.0 Amp, TL = 75°C, 1 inch leads) VF(AV) − 0.8 V
Maximum Reverse Current (rated DC voltage) IR mA
(TJ = 25°C) 0.05 10
(TJ = 100°C) 1.0 50
Maximum Full−Cycle Average Reverse Current, (IO = 1.0 Amp, TL = 75°C, 1 inch leads) IR(AV) − 30 mA
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
†Indicates JEDEC Registered Data

www.onsemi.com
2
 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007

10 1.0E−04
IF, FORWARD CURRENT (A)

IR, REVERSE CURRENT (A)

1.0E−05 TC = 150°C

1.0E−06 TC = 100°C
1 TC = 100°C

1.0E−07

TC = 150°C
1.0E−08
TC = 25°C
TC = 25°C
0.1 1.0E−09
0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 0 100 200 300 400 500 600 700 800 900 1000
VF, INSTANTANEOUS FORWARD VOLTAGE (V) VR, REVERSE VOLTAGE (V)

Figure 1. Typical Forward Voltage Figure 2. Typical Reverse Current

100
TJ = 25°C
C, CAPACITANCE (pF)

10

1
0 20 40 60 80 100 120 140 160 180 200
VR, REVERSE VOLTAGE (V)

Figure 3. Typical Capacitance

www.onsemi.com
3
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007

NOTE 1. − AMBIENT MOUNTING DATA

Data shown for thermal resistance, junction−to−ambient

(RqJA) for the mountings shown is to be used as typical
guideline values for preliminary engineering or in case the
tie point temperature cannot be measured.

TYPICAL VALUES FOR RqJA IN STILL AIR

Mounting Lead Length, L

Method 1/8 1/4 1/2 Units
1 52 65 72 °C/W
2 RqJA 67 80 87 °C/W
3 50 °C/W

MOUNTING METHOD 1

L L

ÉÉÉÉÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉÉÉÉÉ
MOUNTING METHOD 2

ÉÉÉÉÉÉÉÉÉÉÉÉ
L L

ÉÉÉÉÉÉÉÉÉÉÉÉ Vector Pin Mounting

MOUNTING METHOD 3

ÉÉ
ÉÉ L = 3/8 ″

ÉÉ
ÉÉ
ÉÉ
ÉÉ
ÉÉ Board Ground Plane

P.C. Board with

1−1/2 ″ X 1−1/2 ″ Copper Surface

www.onsemi.com
4
 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007

ORDERING INFORMATION
Device Package Shipping†
1N4001G Axial Lead* 1000 Units/Bag
(Pb−Free)
1N4001RLG 5000/Tape & Reel
1N4002G 1000 Units/Bag
1N4002RLG 5000/Tape & Reel
1N4003G 1000 Units/Bag
1N4003RLG 5000/Tape & Reel
1N4004G 1000 Units/Bag
1N4004RLG 5000/Tape & Reel
1N4005G 1000 Units/Bag
1N4005RLG 5000/Tape & Reel
1N4006G 1000 Units/Bag
1N4006RLG 5000/Tape & Reel
1N4007G 1000 Units/Bag
1N4007FFG 3000 Units/Box
1N4007RLG 5000/Tape & Reel

DISCONTINUED (Note 1)
1N4001 Axial Lead* 1000 Units/Bag
1N4001RL Axial Lead* 5000/Tape & Reel
1N4002 Axial Lead* 1000 Units/Bag
1N4002RL Axial Lead* 5000/Tape & Reel
1N4003 Axial Lead* 1000 Units/Bag
1N4003RL Axial Lead* 5000/Tape & Reel
1N4004 Axial Lead* 1000 Units/Bag
1N4004RL Axial Lead* 5000/Tape & Reel
1N4005 Axial Lead* 1000 Units/Bag
1N4005RL Axial Lead* 5000/Tape & Reel
1N4006 Axial Lead* 1000 Units/Bag
1N4006FFG Axial Lead* 3000 Units/Box
(Pb−Free)
1N4006RL Axial Lead* 5000/Tape & Reel
1N4007 Axial Lead* 1000 Units/Bag
1N4007RL Axial Lead* 5000/Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*This package is inherently Pb−Free.
1. DISCONTINUED: These devices are not recommended for new design. Please contact your onsemi representative for information. The
most current information on these devices may be available on www.onsemi.com.

www.onsemi.com
5
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS

AXIAL LEAD
CASE 59−10
ISSUE U
DATE 15 FEB 2005

NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
K D
3. ALL RULES AND NOTES ASSOCIATED WITH
JEDEC DO−41 OUTLINE SHALL APPLY
STYLE 1 STYLE 2 4. POLARITY DENOTED BY CATHODE BAND.
F 5. LEAD DIAMETER NOT CONTROLLED WITHIN F
DIMENSION.

INCHES MILLIMETERS
A
DIM MIN MAX MIN MAX
A 0.161 0.205 4.10 5.20
POLARITY INDICATOR B 0.079 0.106 2.00 2.70
SCALE 1:1
OPTIONAL AS NEEDED F D 0.028 0.034 0.71 0.86
(SEE STYLES)
F −−− 0.050 −−− 1.27
K K 1.000 −−− 25.40 −−−

GENERIC
MARKING DIAGRAM*

A A
STYLE 1: STYLE 2: xxx xxx
PIN 1. CATHODE (POLARITY BAND) NO POLARITY
2. ANODE xxx xxx
YYWW YYWW
STYLE 1 STYLE 2
xxx = Specific Device Code
A = Assembly Location
YY = Year
WW = Work Week

*This information is generic. Please refer to

device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “ G”,
may or may not be present.

Electronic versions are uncontrolled except when accessed directly from the Document Repository.
DOCUMENT NUMBER: 98ASB42045B Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.

DESCRIPTION: AXIAL LEAD PAGE 1 OF 1

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.

© Semiconductor Components Industries, LLC, 2019 www.onsemi.com

 onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

ADDITIONAL INFORMATION
TECHNICAL PUBLICATIONS: ONLINE SUPPORT: www.onsemi.com/support
Technical Library: www.onsemi.com/design/resources/technical−documentation For additional information, please contact your local Sales Representative at
onsemi Website: www.onsemi.com www.onsemi.com/support/sales