Hybrid Motor Starters

Industrial Control Product Catalog 2021

contents
SIRIUS 3RM1 motor starters
6 Section

General data 6/2 – 6/7

Selection and ordering 6/8 – 6/9
Accessories 6/10 – 6/11

ET 200SP motor starters

General data 6/12 – 6/18
SIRIUS Selection and ordering 6/19
3RM1
Base units and control module 6/20
Accessories 6/21

ET 200pro motor starters

General data 6/22 – 6/27
Standard motor starters 6/28
High Feature motor starters 6/29
ET 200pro isolator modules 6/30
ET 200pro safety motor starters 6/31
Solutions local/PROFIsafe
- Safety modules local 6/32 – 6/33
- Safety modules PROFIsafe 6/34
Accessories for ET 200pro motor starters 6/35 – 6/39
Software
Motor Starter ES 6/40
ET 200SP
SIRIUS M200D motor starters

6
General data 6/41 – 6/43
M200D motor starters for AS-Interface

STARTERS
HYBRID MOTOR
General data 6/44 – 6/46
M200D Basic motor starters 6/47
M200D Standard motor starters 6/48
M200D motor starters for PROFIBUS/PROFINET
General data 6/49 – 6/54
Communication modules, motor starter modules 6/55
Software
Motor Starter ES 6/56
Accessories
For all M200D motor starters 6/57 – 6/61
For M200D motor starters for AS-Interface 6/62 – 6/63
ET 200pro For M200D motor starters for PROFIBUS 6/64
For M200D motor starters for PROFINET 6/65

Hybrid fieldbus connections

General data 6/66
Selection and ordering 6/67

SIRIUS M200D

Smart Infrastructure, Industrial Control Catalog 2021 6/1

 Hybrid Motor Starters
Load Feeders and Motor Starters for Use in the Control Cabinet
SIRIUS 3RM1 motor starters
Introduction
SIRIUS 3RM1 motor starters

■ Overview
SIRIUS 3RM1 motor starters are compact devices, 22.5 mm
wide, combining a large number of functions in a single
enclosure. They consist of combinations of relay contacts,
power semiconductors (hybrid technology), and an electronic
overload relay for operational switching of three-phase motors
up to 3 HP (at 480V).
The 3RM1 motor starters with overload protection with wide
setting range are available as direct-on-line starters and
reversing starters and as versions with safety-related shutdown
up to SIL 3/PL e.

3RM13 motor starter with reversing functionality, electronic overload

protection and safety-related shutdown
Seamlessly integrated safety right through to the main circuit
Functional safety in the main circuit needs to be both simple and
flexible.
The unique compatibility of hybrid 3RM1 fail-safe motor starters
and 3SK safety relays means that integrated functional safety
right through to the main circuit is no longer a problem.
Their compact design allows the motor starters to be installed to
the right of the safety relay in a simple manner, just like an output

8
expansion. The wiring of the safety-related signals to the relay
6

can be performed simply, quickly and in an error-free manner

using the device connector.
HYBRID MOTOR
STARTERS

The ergonomically designed enclosure with removable termi-

nals and terminal labeling in the hinged cover allows for the
cables to be conveniently diagonally mounted from the front.
Either screw or spring-loaded terminals with push-in technology
are available.
Highlights
• Fail-safe disconnection of motors up to 3 kW
• Problem-free combination of fail-safe motor starters and safety
relays
• End-to-end system, simple setup using device connectors
3SK + 3RM1
IC01_00533

• Ergonomic enclosure
Note:
For SIRIUS 3SK safety
safety relays,
relays, see
see page
page 11/12.
13/133.

Problem-free integration of functional safety into the main circuit through

the simple combination of 3RM1 and 3SK devices

6/2 Smart Infrastructure, Industrial Control Catalog 2021

Siemens IC 10 · 2020
 Hybrid Motor Starters
Load Feeders and Motor Starters for Use in the Control Cabinet
SIRIUS 3RM1 motor starters
General data
SIRIUS 3RM1 motor starters
Article No. scheme
Product versions Article number
Product function Direct-on-line starters 3RM10 0 @ – @ AA @ 4
Failsafe direct-on-line starters 3RM11 0 @ – @ AA @ 4 with ATEX certification and safety-related shutdown
Reversing starters 3RM12 0 @ – @ AA @ 4
Failsafe reversing starters 3RM13 0 @ – @ AA @ 4 with ATEX certification and safety-related shutdown
Wide setting range for 0.1 ... 0.5 A 1
electronic overload 0.4 ... 2.0 A 2 For motor standard output up to 3/4 HP1)
release
1.6 ... 7.0 A (UL=6.1A) 7 For motor standard output up to 3 HP1)
Connection method Screw terminals 1
Spring-loaded terminals 2
(push-in)
Mixed connection method 3 Spring-loaded terminals (push-in)
Rated control supply 24 V DC 0
voltage Us 110 ... 230 V AC; 110 V DC 1
Example 3RM13 0 1 – 2 AA 0 4
1) Standard three-phase motor; the actual startup characteristics of the motor
as well as its rated data are important factors here.
Note:
The article number scheme shows an overview of product For your orders, please use the article numbers quoted in the
versions for better understanding of the logic behind the article selection and ordering data.
numbers.

■ Benefits
Product advantages
• Less space required in the control cabinet (20 to 80%) thanks Standards and approvals
to high functional density, which also means reduced wiring • IEC/EN 60947-4-2
and testing
8

• UL 60947-4-2

6
• Greater endurance and reduced heat losses thanks to hybrid • CSA
technology • ATEX

STARTERS
HYBRID MOTOR
• Lower costs for stock keeping and configuration as a result of • IEC 61508-1: SIL 3
the wide setting range of the electronic overload release • ISO 13849: PL e
(up to 1:5) • CCC approval for China
• Fast wiring without tools for rigid conductors or conductors
equipped with end sleeves thanks to spring-loaded terminals
(push-in)
• Safety-related shutdown in accordance with SIL 3/PL e by
shutting down the control supply voltage without additional
devices in the main circuit
•• The motor
motor starters
starters can be ideally
ideally combined
combinedwith
with3SK
3SK safety
safety
relays for safety-related
safety-related shutdown
shutdown (see
(seepage
page13/133).
11/12)
• Motor status feedback to the higher-level control system in the
case of 3RM10 and 3RM12 motor starters in the 24 V DC
version
• Virtually error-free wiring on the mains connection side and
reduction in short-circuit protective devices by means of
3RM19 infeed system
• ATEX certification of the overload protection of the 3RM1
Failsafe motor starters: "Increased safety" type of protection
EEx e according to ATEX directive 2014/34/EU
•• The 3RM1
3RM1 motor
motor starters
starters can
can be used with highly
highly energy-
energy-
efficient IE3/IE4 motors. In this regard,
regard, please
pleaseobserve
observethe
the
dimensioning and
information on dimensioning and configuring,
configuring,see
see
Application Manual.
Manual.
For more information about IE3/IE4, see page page 1/7.
1/7.

Smart Infrastructure, Industrial Control Catalog 2021 6/3

 Hybrid Motor Starters
Load Feeders and Motor Starters for Use in the Control Cabinet
SIRIUS 3RM1 motor starters
General data
SIRIUS 3RM1 motor starters

■ Technical specifications
More information
Industry
Industry Mall,
Mall, see
see www.siemens.com/product?3RM1
www.siemens.com/product?3RM1 FAQs, see
FAQs, see https://support.industry.siemens.com/cs/ww/en/ps/16311/faq
https://support.industry.siemens.com/cs/ww/en/ps/16311/faq
Equipment
Equipment Manual,
Manual, see
see
https://support.industry.siemens.com/cs/ww/en/view/66295730
https://support.industry.siemens.com/cs/ww/en/view/66295730

Article number 3RM10, 3RM11,

3RM12 3RM13
General technical specifications:
Dimensions (W x H x D) mm 22.5 x 100 x 141.6
Ambient temperature
• During operation °C -25 … +60
• During storage °C -40 … +70
• During transport °C -40 … +70
Installation altitude at height above sea level, maximum m 4 000 2 000
Shock resistance 6 g / 11 ms
Vibration resistance 1 ... 6 Hz, 15 mm; 20 m/s², 500 Hz
Degree of protection IP20
Mounting position Vertical, horizontal, standing (consider derating)

IC01_00469

Article number 3RM1.01 3RM1.02 3RM1.07

Main circuit:
Operational voltage, rated value, maximum V 500
Operating frequency Hz 50/60
Operational current at AC-53a at 400 V at an ambient temperature of 40 °C A 0.5 2 7
Minimum load [% of IM] % 20

8
Adjustable current response value of the inverse-time delayed overload release A 0.1 ... 0.5 0.4 ... 2 1.6 ... 7
6

Article number 3RM1.0.-.AA04 3RM1.0.-.AA14

HYBRID MOTOR
STARTERS

Control circuit:
Type of voltage of the control supply voltage DC AC/DC
Control supply voltage
• At DC V 24 110
• At AC at 50 Hz V -- 110 … 230
Frequency of the control supply voltage Hz -- 50/60

6/4 Smart Infrastructure, Industrial Control Catalog 2021

Siemens IC 10 · 2020
 Hybrid Motor Starters
Load Feeders and Motor Starters for Use in the Control Cabinet
SIRIUS 3RM1 motor starters
General data
SIRIUS 3RM1 motor starters

Type 3RM1.0.-1AA.4 3RM1.0.-3AA.4 3RM1.0.-2AA.4

Connections/terminals:
Type of electrical connection for main circuit Screw terminals Spring-loaded
(1 or 2 conductors can be connected) terminals
(push-in)
Connectable conductor cross-section for main contacts
• Solid mm² 1 x (0.5 ... 4), 2 x (0.5 ... 2.5) 1 x (0.5 ... 4)
• Finely stranded
- With end sleeve mm² 1 x (0.5 ... 4), 2 x (0.5 ... 1.5) 1 x (0.5 ... 2.5)
- Without end sleeve mm² -- 1 x (0.5 ... 4)
Type of electrical connection for auxiliary and control circuit Screw Spring-loaded terminals
(1 or 2 conductors can be connected) terminals (push-in)
Type of connectable conductor cross-sections for auxiliary contacts
• Solid mm² 1 x (0.5 ... 2.5), 1 x (0.5 ... 1.5), 2 x (0.5 ... 1.5)
2 x (1.0 ... 1.5)
• Finely stranded
- With end sleeve mm² 1 x (0.5 ... 2.5), 1 x (0.5 ... 1.0), 2 x (0.5 ... 1.0)
2 x (0.5 ... 1)
- Without end sleeve mm² -- 1 x (0.5 ... 1.5), 2 x (0.5 ... 1.5)
Type of connectable conductor cross-sections for AWG cables
• For main contacts 1 x (20 ... 12), 2 x (20 ... 14) 1 x (20 ... 12)
• For auxiliary contacts 1 x (20 ... 14), 1x (20 ... 16), 2 x (20 ... 16)
2 x (18 ... 16)

■ Accessories
More information
1
Equipment Manual,
Equipment Manual, see
see
https://support.industry.siemens.com/cs/ww/en/view/66295730
https://support.industry.siemens.com/cs/ww/en/view/66295730

Three-phase infeed system (3RM19 three-phase busbar

system)
The system permits an easy, time-saving and safe means of
feeding two or more 3RM1 motor starters. It can be used only
8

with motor starters with screw terminals and in combination with

6
8US1716-0RK00 adapters for mounting rails in the main circuit.
The maximum summation current must not exceed 25 A. The

STARTERS
HYBRID MOTOR
IC01_00169c
primary infeed is connected via a three-phase infeed terminal.
The busbars are available in three lengths, for two, three or five
motor starters. More than five devices can be connected by
clamping the connection tags of a second busbar rotated by
180°. 4
The three-phase busbars are finger-safe but empty connection
tags must be fitted with covers.
3

1 Four 3RM1 motor starters on standard mounting rail with one

free slot
2 3RM1920-1AA three-phase infeed terminal
3 Two 3RM1910-1DA three-phase busbars rotated through 180°
for the connection of up to nine motor starters
4 Covers for three 3RM1910-6AA connection tags respectively
for unused slots

3RM19 infeed system with three-phase infeed terminal: In the above

example, two three-phase busbars (5-pole busbars) rotated through
180° allow up to nine 3RM1 motor starters to be connected. Contact with
the unused connection tags in unoccupied positions is prevented safely
by the covers.

Smart Infrastructure, Industrial Control Catalog 2021 6/5

Siemens IC 10 · 2020
 Hybrid Motor Starters
Load Feeders and Motor Starters for Use in the Control Cabinet
SIRIUS 3RM1 motor starters
General data
SIRIUS 3RM1 motor starters
Fuse module for the use of 3RM1 motor starters on 8US busbar systems and mounting rails
The fuse module permits the very compact construction of a The fuse module can be combined with all 3RM1 motor starters.
load feeder with a maximum width of 22.5 mm. The 3RM1 motor The easily replaceable fuses protect the connected motor and
starter in combination with the integrated fuses for short-circuit the cables.
protection can therefore be used on 8US busbar systems.
Thanks to the range of different adapters, the fuse module can
be used in all 60 mm busbar systems and also in compact
busbar systems and on mounting rails. The interface to the
adapter also permits a simple and secure replacement of the
load feeder.

5 1 Busbar system
2 3 5
1 4 2 Cover profiles for busbars
3 Busbar adapter
4 Compact busbar adapter

5 3RM1 motor starter

6 3RM19 fuse module
7 3RM19 fuse module with open flap
(Flap cannot be opened when fuse
module is inserted. The fuse
module must be removed to change
the fuses.)

IC01_00611a

8
6 STARTERS
HYBRID MOTOR

6
7

By means of the fuse module, 3RM1 motor starters can be used in busbar systems and 8US compact busbar systems, as well as on mounting rails

6/6 Smart Infrastructure, Industrial Control Catalog 2021

 Hybrid Motor Starters
Load Feeders and Motor Starters for Use in the Control Cabinet
SIRIUS 3RM1 motor starters
General data
SIRIUS 3RM1 motor starters
Device connectors for the control circuit Safe group shutdown can be implemented particularly easily in
conjunction with 3SK safety relays. In this case, up to five motor
The device connectors for 3RM1 motor starters (24 V DC control starters can be directly connected to 3SK safety relays via the
supply voltage only) reduce the outlay for cabling by looping device connector and then safely shut down (see page 13/133).
through the control supply voltage. The device connectors can
be snapped onto a standard mounting rail or fixed to a level
mounting panel using screws. 3SK safety relay 3RM1 motor starter

IC01_00178a
IC01_00218b

Motor

Ideal connection: Combination of four SIRIUS 3RM1 Failsafe motor

starters with SIRIUS 3SK safety relays
Electromechanical switching devices in series with hybrid
motor starters
Device connector with 3RM1 motor starter Switching an inductive load - in particular of motors < 1 kW with
high inductance - with an electromechanical switching device
Using the device connectors exclusively for feeding in the
(e.g. contactor) can cause high and steep voltage edges.
control supply voltage
The resulting faults/damage can be prevented by first
By using device connectors, a maximum of five motor starters
disconnecting with the hybrid motor starter or by using
can be supplied with 24 V DC control supply voltage. This
EMC suppression modules:
requires the control supply voltage to be applied to the A1 and
A2 terminals of only one motor starter. • For 3RT2916-1P.. EMC suppression modules for direct
mounting on the contactor, see page 2/78
8

Device daisy chain connectors can be used for gaps between

6
two motor starters. Device termination connectors terminate a •• For motor
motor suppression
suppression modules that are
are fitted
fitted in
in the
the main
main
circuit, (see page 8/94
see page 6/11).
group.

STARTERS
HYBRID MOTOR
Using the device connectors for safe group shutdown Note:

In combination with the 3RM11 and 3RM13 fail-safe motor For more
For moreinformation,
information,see
see
starters, the device connector can also be used for safety- https://support.industry.siemens.com/cs/ww/en/view/109758696.
https://support.industry.siemens.com/cs/ww/en/view/109758696.
related shutdown. For this application, groups of no more than
five fail-safe motor starters can be connected using a device
connector, and the group must be terminated with a termination
connector. Removing the control voltage supply from the first
motor starter will safely shut down the whole group.

Smart Infrastructure, Industrial Control Catalog 2021 6/7

 Hybrid Motor Starters
Load Feeders and Motor Starters for Use in the Control Cabinet
SIRIUS 3RM1 motor starters
Selection and ordering data IE3/IE4 ready
SIRIUS 3RM1 motor starters

Selection and ordering data

More information
Industry Mall, see
Industry Mall, see www.siemens.com/product?3RM1
www.siemens.com/product?3RM1

Operational power Adjustable current Control supply voltage SD Article No. Price PU PS*
for three-phase response value of the per PU (UNIT,
motor inverse-time delayed At DC At AC at SET, M)
at 460 V1) overload release 50 Hz
HP A V V d
Direct-on-line starters
-- 0.1 … 0.5 24 -- 2 3RM1001-@AA04 1 1 unit
3/4 0.4 … 2 24 -- 2 3RM1002-@AA04 1 1 unit
3 1.6 … 6.1 24 -- 2 3RM1007-@AA04 1 1 unit
-- 0.1 … 0.5 110 110 ... 230 2 3RM1001-@AA14 1 1 unit
3/4 0.4 … 2 110 110 ... 230 2 3RM1002-@AA14 1 1 unit
3 1.6 … 6.1 110 110 ... 230 2 3RM1007-@AA14 1 1 unit

3RM1001-1AA04
Reversing starters
-- 0.1 … 0.5 24 -- 2 3RM1201-@AA04 1 1 unit
3/4 0.4 … 2 24 -- 2 3RM1202-@AA04 1 1 unit
3 1.6 … 6.1 24 -- 2 3RM1207-@AA04 1 1 unit
-- 0.1 … 0.5 110 110 ... 230 2 3RM1201-@AA14 1 1 unit
3/4 0.4 … 2 110 110 ... 230 2 3RM1202-@AA14 1 1 unit
3 1.6 … 6.1 110 110 ... 230 2 3RM1207-@AA14 1 1 unit

8
3RM1201-1AA04
6

Failsafe direct-on-line starters

-- 0.1 … 0.5 24 -- 2 3RM1101-@AA04 1 1 unit
HYBRID MOTOR
STARTERS

3/4 0.4 … 2 24 -- 2 3RM1102-@AA04 1 1 unit

3 1.6 … 6.1 24 -- 2 3RM1107-@AA04 1 1 unit
-- 0.1 … 0.5 110 110 ... 230 2 3RM1101-@AA14 1 1 unit
3/4 0.4 … 2 110 110 ... 230 2 3RM1102-@AA14 1 1 unit
3 1.6 … 6.1 110 110 ... 230 2 3RM1107-@AA14 1 1 unit

3RM1101-1AA04
Failsafe reversing starters
-- 0.1 … 0.5 24 -- 2 3RM1301-@AA04 1 1 unit
3/4 0.4 … 2 24 -- 2 3RM1302-@AA04 1 1 unit
3 1.6 … 6.1 24 -- 2 3RM1307-@AA04 1 1 unit
-- 0.1 … 0.5 110 110 ... 230 2 3RM1301-@AA14 1 1 unit
3/4 0.4 … 2 110 110 ... 230 2 3RM1302-@AA14 1 1 unit
3 1.6 … 6.1 110 110 ... 230 2 3RM1307-@AA14 1 1 unit

3RM1301-1AA04
Type of electrical connection
• Screw terminals for main circuit, screw terminals for control circuit 1
• Spring-loaded terminals (push-in) for main circuit, spring-loaded terminals (push-in) 2
for control circuit
• Screw terminals for main circuit, spring-loaded terminals (push-in) for control circuit 3
1)
The actual startup characteristics of the motor as well as its rated data are
important factors here.

6/8 Smart Infrastructure, Industrial Control Catalog 2021

* You can order this quantity or a multiple thereof.

Siemens IC 10 · 2020
 Hybrid Motor Starters
Load Feeders and Motor Starters for Use in the Control Cabinet
SIRIUS 3RM1 motor starters
Accessories
SIRIUS 3RM1 motor starters

Product designation SD Article No. Price PU PS*

per PU (UNIT,
SET, M)
d
Three-phase infeed system for 3RM1 with screw terminals
Three-phase infeed terminals } 3RM1920-1AA 1 1 unit
• For three-phase busbars

3RM1920-1AA
Three-phase busbars
• For 2 motor starters } 3RM1910-1AA 1 1 unit

3RM1910-1AA

• For 3 motor starters } 3RM1910-1BA 1 1 unit

3RM1910-1BA

• For 5 motor starters } 3RM1910-1DA 1 1 unit

3RM1910-1DA

Covers } 3RM1910-6AA 1 10 units

For 3 connection tags of the three-phase busbars
8

6
3RM1910-6AA
Fuse modules for 3RM1 for use on busbars or mounting rails

STARTERS
HYBRID MOTOR
Fuse module with 3NW6007-1 fuse 2 3RM1932-1AB 1 1 unit
Fuse module without fuse1) 10 3RM1930-1AA 1 1 unit

3RM1932-1AB
Adapters
Adapters for 60 mm busbar systems 5 8US1216-0AS00 1 1 unit
22.5 mm x 200 mm x 41.5 mm
Note: The adapter can be used on busbars with a width of
12 mm and a thickness of 5 mm or 10 mm.

8US1216-0AS00
Adapters for 60 mm compact busbar systems 5 8US1616-0AK02 1 1 unit
22.5 mm x 160 mm x 41.5 mm
Note: The adapter can be used on busbars with a width of
12 mm, 15 mm, 20 mm, 25 mm or 30 mm and a thickness
of 5 mm or 10 mm.

8US1616-0AK02
1) For details of alternative fuses, see
see Equipment
EquipmentManual.
Manual.

Smart Infrastructure, Industrial Control Catalog 2021 6/9

* You can order this quantity or a multiple thereof.
8/92 Siemens IC 10 · 2020 Illustrations are approximate
 Hybrid Motor Starters
Load Feeders and Motor Starters for Use in the Control Cabinet
SIRIUS 3RM1 motor starters
Accessories
SIRIUS 3RM1 motor starters

Product designation SD Article No. Price PU PS*

per PU (UNIT,
SET, M)
d
Adapters
Adapter for 35 mm DIN mounting rails 5 8US1716-0RK00 1 1 unit
22.5 mm x 185 mm x 23.5 mm

8US1716-0RK00
Cover profiles1)2)
Cover profiles for busbars
12 mm x 5 mm x 1 000 mm 2 8US1922-2CA00 1 10 units
40 mm or 60 mm center-to-center busbar clearance
depending on busbar system
8US1922-2CA00
15 mm x 5 mm x 1 000 mm 2 8US1922-2AA00 1 10 units
20 mm x 5 mm x 1 000 mm
25 mm x 5 mm x 1 000 mm
30 mm x 5 mm x 1 000 mm
40 mm or 60 mm center-to-center busbar clearance
depending on busbar system
8US1922-2AA00
12 mm x 10 mm x 1 000 mm 2 8US1922-2BA00 1 10 units
15 mm x 10 mm x 1 000 mm
20 mm x 10 mm x 1 000 mm
25 mm x 10 mm x 1 000 mm
30 mm x 10 mm x 1 000 mm

8
6

60 mm center-to-center busbar clearance

8US1922-2BA00
Device connectors
HYBRID MOTOR
STARTERS

Device connectors 2 3ZY1212-2EA00 1 1 unit

For 3RM1 motor starters, 24 V DC, 22.5 mm

3ZY1212-2EA00
Device daisy chain connectors 2 3ZY1212-2AB00 1 1 unit
For 3RM1 motor starters 24 V DC, 22.5 mm
For gaps without motor starters in assemblies

3ZY1212-2AB00
Device termination connectors 2 3ZY1212-2FA00 1 1 unit
For 3RM1 motor starters, 24 V DC, 22.5 mm

3ZY1212-2FA00
1) 2) configuration of
of aa busbar
busbar system,
system, see
The cover profiles for busbars can be used for maintaining minimum For further accessories for the configuration
spacing between the load feeders. see Catalog
Catalog LV 10.
LV 10.

6/10 Smart Infrastructure, Industrial Control Catalog 2021

* You can order this quantity or a multiple thereof.

Illustrations are approximate Siemens IC 10 · 2020
 Hybrid Motor Starters
Load Feeders and Motor Starters for Use in the Control Cabinet
SIRIUS 3RM1 motor starters
Accessories
SIRIUS 3RM1 motor starters

Product designation SD Article No. Price PU PS*

per PU (UNIT,
d SET, M)
Removable terminals
Terminal for main circuit, 2-pole
Screw terminals

• Screw terminals, 2 3ZY1122-1BA00 1 6 units

1 x 4 mm²
Spring-loaded terminals
(push-in)
• Spring-loaded terminals (push-in), 2 3ZY1122-2BA00 1 6 units
1 x 4 mm²
3ZY1122-1BA00
Terminal for control circuit, 3-pole
Screw terminals

• Screw terminals, 2 3ZY1131-1BA00 1 6 units

1 x 2.5 mm²
Spring-loaded terminals
(push-in)
• Spring-loaded terminals (push-in), 2 3ZY1131-2BA00 1 6 units
1 x 2.5 mm²
3ZY1131-1BA00
Further accessories
Push-in lugs for wall mounting 2 3ZY1311-0AA00 1 10 units
2 lugs per device are required

3ZY1311-0AA00
8

Sealable covers, 22.5 mm 2 3ZY1321-2AA00 1 5 units

6
For simple protection against unauthorized access

STARTERS
HYBRID MOTOR
3ZY1321-2AA00
Coding pins for removable terminals 2 3ZY1440-1AA00 1 12 units
For mechanical coding of the terminals

3ZY1440-1AA00
Hinged cover
Replacement cover, without terminal labeling,
22.5 mm wide
• Titanium gray 2 3ZY1450-1AB00 1 5 units
• Yellow 2 3ZY1450-1BB00 1 5 units

3ZY1450-1AB00

Motor suppression module

• Square 15 3RK1911-6EA00 1 1 unit
• Round 15 3RK1911-6EB00 1 1 unit

3RK1911-6EA00
Screwdrivers Spring-loaded terminals
For all SIRIUS devices with spring-loaded terminals
Length approx. 200 mm, 2 3RA2908-1A 1 1 unit
3.0 mm x 0.5 mm,
titanium gray/black,
3RA2908-1A partially insulated

Smart Infrastructure, Industrial Control Catalog 2021 6/11

* You can order this quantity or a multiple thereof.

Siemens IC 10 · 2020 Illustrations are approximate
 Hybrid Motor Starters
Load Feeders and Motor Starters for Use in the Control Cabinet
ET 200SP motor starter
Introduction
ET 200SP motor starters

Overview

1 2 3 4 5 6 6 7
2

1
IC01_00662a

5 9
1 ET 200SP interface module

IC01_00613a
2 ET 200SP digital input
3 1 ET 200SP fail-safe motor starter 3 ET 200SP digital output
2 BaseUnit for ET 200SP motor starter 4 ET 200SP analog input
7 Dummy module consisting of
3 Fan 5 Dummy module consisting of BaseUnit + BU cover, 30 mm
BaseUnit + BU cover, 15 mm
4 3DI/LC module 8 3DI/LC module
4
6 ET 200SP motor starter F-DI and 9 Infeed bus cover
5 Infeed bus cover ET 200SP motor starter

Motor starter, BaseUnit, fan and 3DI/LC control module 3RK1308 motor starter in the ET 200SP I/O system

8
6

More information
HYBRID MOTOR
STARTERS

Homepage, www.siemens.com/ET200SP-motorstarter
Homepage, see www.siemens.com/ET200SP-motorstarter Further
Further components
components in in the
the ET
ET 200SP
200SP I/O
I/O system:
system:
Industry Mall,
Industry Mall, see
see www.siemens.com/product?3RK1308
www.siemens.com/product?3RK1308 •• Catalog
CatalogSTST70
70
TIA Selection
Selection Tool, see
see www.siemens.com/TST
www.siemens.com/TST •• Industry
Industry Mall, see
see www.siemens.de/product?ET200SP
www.siemens.de/product?ET200SP

ET 200SP motor starters

ET 200SP is a scalable and extremely flexible modular • The signal states in the process image of the motor starter
I/O system. provide information about protective devices (short circuit or
overload), the switching states of the motor starter, and
As I/O modules, the ET 200SP motor starters are an integral part system faults.
of this I/O system. They are switching and protection devices for
single- and three-phase loads and are available as direct-on-line Starter Kit
or reversing starters. The 3RK1908-1SK00
The 3RK1908-1SK00Starter
StarterKit
Kitisisa afavorably
favorablypriced complete
priced complete
Basic functionality package for
package forswitching
switchingand
andmonitoring
monitoring motors
motorsin the ET 200SP
in the ET 200SP
system, see page
system, see page6/21.
8/104.
All versions of the ET 200SP motor starter feature the following
functionality: It contains:
• Fully pre-wired motor starters for switching and protecting any • a 3RK1308-0BC00-0CP0 reversing starter (0.9 to 3 A)
AC loads up to 5.5 kW from 48 V AC to 500 V AC • a 3RK1908-0AP00-0AP0 BaseUnit with 500 V and
• Disconnection possible via fail-safe motor starters up to SIL 3 24 V AC/DC infeed
and PL e Cat. 4 • an EMC distance module
• With self-assembling 32 A power bus, i.e. the load voltage is (consisting of 6ES7193-6BP00-0BA0 BaseUnit plus
only fed in once for a group of motor starters 6ES7133-6CV15-1AM0 BU cover 15 mm)
• All control supply voltages connected only once, i.e. when Use of fan
modules are added they are automatically connected to the
next module For motor starters with a 12 A rated current, the
3RW4928-8VB00 fan is included in the scope of supply.
• Hot swapping is permissible
• Digital inputs can optionally be used via a 3DI/LC module This fan
fan can
can also
alsobe
beordered
orderedas asan
anoption
optionforformotor
motorstarters
starterswith
with
lower rated
rated currents,
currents,ififthe
theboundary
boundaryconditions
conditions demand
demand this.
this.
• Control of the motor starter from the control system and For information
informationon onthe
theambient
ambientconditions
conditionsforfor the
the use
use of of motor
motor
extensive diagnostics status via the cyclic process image starters, see chapter
starters, see chapter“Product
"Product overview”
overview" inin the
theEquipment
Equipment
• Diagnostics capability for active monitoring of the switching Manual.
and protection functions

6/12 Smart Infrastructure, Industrial Control Catalog 2021

 Hybrid Motor Starters

ET 200SP
Load Feedersmotor starter
and Motor Starters for Use in the Control Cabinet

Introduction
ET 200SP motor starters
Designing interference-free motor starters BaseUnits for motor starters
For interference-free operation of the ET 200SP station in
1 24 V and 500 V DC
accordance with IEC 60947-4-2 standard, use a dummy module
before the first motor starter. The dummy module consists of the 2 500 V AC
6ES7193-6BP00-0BA0 or 6ES7193-6BP00-0DA0 BaseUnit and 3 24 V DC
the 6ES7133-6CV15-1AM0 BU cover 15 mm.
4 without infeed
The 15 mm BU cover protects the plug contacts of the BaseUnit 5 3RK1908-0AP00-0EP0
against dirt. (not shown here)
Electromechanical switching devices in series with hybrid motor 6 3RK1908-0AP00-0FP0
starters (not shown here)

IC01_00535a
Switching an inductive load - in particular of motors <1 kW with 7 500 V AC
high inductance - with an electromechanical switching device with F-DI infeed
(e.g. contactor) can cause high and steep voltage edges. 8 500 V AC
1 2 3 4 7 8 9 10
The resulting faults/damage can be prevented by first with F-DI loop-through
disconnecting with the hybrid motor starter or by using EMC 9 without infeed
suppression modules: with F-DI infeed
• 3RT2916-1P.. EMC
• For 3RT2916-1P.. EMC suppression
suppression modules for direct 10 without infeed
mounting on the contactor, see page
page 13/133.
3/118 with F-DI loop-through
• For motor suppression modules
• modules that
that are
are fitted
fitted in
in the
the main
main
circuit, see
see page
page 18/104
6/21.
View of the BaseUnit infeeds for the motor starters
Note: BaseUnits are components for accommodating the ET 200SP
For more
more information,
information,see
see I/O modules.
https://support.industry.siemens.com/cs/ww/en/view/109758696..
https://support.industry.siemens.com/cs/ww/en/view/109758696. The self-assembling voltage buses integrated into the BaseUnits
3DI/LC control module reduce wiring outlay to the single infeed (both of auxiliary and
load voltage).
This is
is aa digital
digitalinput
inputmodule
modulewith
withthree
threeinputs
inputsfor
forlocal
localmotor
motor
starter functions
functions such
such as
as“manual
"manuallocal
localcontrol”,
control",“implementation
"implementation All modules following on the right are automatically supplied
of fast inputs”
inputs" or “end
"end position disconnection”.
disconnection". For
For aa list
list of
of all
allthe
the upon plugging the BaseUnits together, if BaseUnits are inserted
functions
functions permitted
permitted byby the
the 3DI/LC module, see chapter "Overview
“Overview with routing.
8

of functions"
functions”ininthetheEquipment
EquipmentManual.
Manual.

6
The rugged design and keyed connection technology enables
The module is plugged into the front of the motor starter from use in harsh industrial conditions.
which it is supplied with a 24 V DC operating voltage.

STARTERS
HYBRID MOTOR
The BaseUnits are available with various infeeds for the motor
starters.

Smart Infrastructure, Industrial Control Catalog 2021 6/13

 Hybrid Motor Starters
Load Feeders and Motor Starters for Use in the Control Cabinet
ET 200SP motor starter
General data
ET 200SP motor starters
Article No. scheme

Product versions Article number

Motor starters 3RK1308 – 0 @ @ 0 0 – 0 C P 0
Product function Direct-on-line starters A For motor standard output 0.09 ... 5.5 kW1)
Reversing starters B For motor standard output 0.09 ... 5.5 kW1)
Fail-safe direct-on-line starters C For motor standard output 0.09 ... 5.5 kW1)
Fail-safe reversing starters D For motor standard output 0.09 ... 5.5 kW1)
Current range 0.1 ... 0.4 A A Maximum current-carrying capacity when starting 4 A
0.3 ... 1 A B Maximum current-carrying capacity when starting 10 A
0.9 ... 3 A C Maximum current-carrying capacity when starting 30 A
2.8 ... 9 A D Maximum current-carrying capacity when starting 90 A
4 ... 12 A E Including fan (3RW4928-8VB00),
maximum current-carrying capacity when starting 100 A
Example 3RK1308 – 0 A D 0 0 – 0 C P 0
1)
For standard motors: Single- or three-phase asynchronous motors,
single-phase AC motors, single-phase asynchronous motors, at 400 V AC
and 500 V AC; the actual startup characteristics of the motor as well as its
rated data are important factors here.

Product versions Article number

BaseUnit 3RK1908 – 0 A P 0 0 – 0 @ P 0
BU infeed 24 V and 500 V AC A
24 V DC B
500 V AC C
without infeed D
500 V AC G with F-DI infeed
500 V AC H with F-DI loop-through
without infeed J with F-DI loop-through
without infeed K with F-DI infeed

8
6

Example 3RK1908 – 0 A P 0 0 – 0 A P 0

Note:
HYBRID MOTOR
STARTERS

The article number schemes show an overview of product ver- For your orders, please use the article numbers quoted in the
sions for better understanding of the logic behind the article selection and ordering data.
numbers.

■ Benefits
Product advantages • The ET 200SP
• 200SP motor
motor starters
starters can
can be used with highly energy-
highly energy
efficient IE3/IE4 motors,
efficient IE3/IE4 motors, see
see Application
ApplicationManual.
Manual.
The ET 200SP motor starters offer a number of advantages: Take the current characteristics
characteristics ofof the
the connected
connectedmotor
motorandand
• Fully integrated into the ET 200SP I/O system (including motor starter into account when dimensioning.
dimensioning. In In addition
additiontoto
TIA Selection Tool and TIA Portal) the rated current, the maximum
maximum permissible
permissiblecurrent
currentrange
rangeofof
• High degree of flexibility when it comes to safety applications the motor starter and the ratio of the rated current
current to
to the
via SIMATIC F-CPU or SIRIUS 3SK safety relays up to SIL 3 starting current
current of
of the
the motor are
are relevant.
relevant.
and PL e Cat. 4. For more information on IE3/IE4, see page page 1/7.
1/7.
• Simple, integrated current value transmission Standards and approvals
• Extensive parameterization by means of TIA Portal • IEC/EN 60947-4-2
• Increase of plant availability through fast replacement of units • UL 60947-4-2
(easy mounting and plug-in technology) • CSA
• Greater endurance and reduced heat losses thanks to hybrid • ATEX
technology
• IEC 61508-1: SIL 3
• Less space required in the control cabinet (20 to 80%) as a
result of greater functional density (direct-on-line and • ISO 13849: PL e
reversing starters in same width) • CCC approval for China
• Extensive diagnostics and information for preventive
maintenance
• Parameterizable inputs via 3DI/LC control module
• Less wiring and testing required as a result of integrating
several functions into a single device
• Lower overheads for stock keeping and configuration as a
result of the wide setting range of the electronic overload
release (up to 1:3)
• Technology has lower inherent power losses than speed-
controlledSmart
6/14 driveInfrastructure,
systems, soIndustrial
that lessControl
cooling (and 2021
Catalog smaller
footprint) are possible
 Hybrid Motor Starters
Load Feeders and Motor Starters for Use in the Control Cabinet
ET 200SP motor starter
General data
ET 200SP motor starters

Application
The ET 200SP motor starters are suitable for the following • Track switching and lifting table control in conveyor systems:
applications: Track switches can be implemented using the quick stop
• Switching and monitoring of function and lifting table controls by means of the "immediate
- three-phase motors with overload and short-circuit end position disconnection" function without any laborious
protection (e.g. 400 V asynchronous motors for secondary programming.
drives in conveyor systems) • Safe isolation of the drive from main power supply:
- single-phase motors with overload and short-circuit The isolating functions according to IEC 60947-1 offer
protection (e.g. 230 V motors for pump applications) protection against inadvertent activation during plant
- Resistive loads by means of current value and diagnostics maintenance.
via the maintenance function (e.g. for heaters)
Motor starters in the process industry
• Plant monitoring and energy management in conveyor
systems: For the ET 200SP motor starters, special BaseUnits are available
By means of the phase asymmetry and zero current detection that enable the device to be used in the ET 200SP HA
during current measurement, for example, drive belt I/O system, too. This is typically used in process engineering
monitoring and blocking monitoring are possible. applications.

Technical specifications
More information
Industry Mall, see
Industry Mall, see www.siemens.com/product?3RK1308
www.siemens.com/product?3RK1308 FAQs,
FAQs, see
see https://support.industry.siemens.com/cs/ww/en/ps/21800/faq
https://support.industry.siemens.com/cs/ww/en/ps/21800/faq
Equipment Manual,
Manual, see
see
https://support.industry.siemens.com/cs/ww/en/view/109479973
https://support.industry.siemens.com/cs/ww/en/view/109479973

ET 200SP motor starters

Article number 3RK1308- 3RK1308- 3RK1308- 3RK1308- 3RK1308-
0AA00-0CP0 0AB00-0CP0 0AC00-0CP0 0AD00-0CP0 0AE00-0CP0
3RK1308- 3RK1308- 3RK1308- 3RK1308- 3RK1308-
0BA00-0CP0 0BB00-0CP0 0BC00-0CP0 0BD00-0CP0 0BE00-0CP0
Product category Motor starters
General technical specifications:
8

6
Width x height x depth mm 30 × 142 × 150

STARTERS
HYBRID MOTOR
H

Design of the switching contact Hybrid

Design of the motor protection Electronic
Installation altitude at height above sea level, m 4 000
maximum
Mounting position Vertical, horizontal, flat (observe derating)
Type of mounting Can be plugged into BaseUnit
Ambient temperature
• During operation °C -25 ... +60
• During transport °C -40 ... +70
• During storage °C -40 ... +70
Relative humidity during operation % 10 ... 95
Vibration resistance 15 mm up to 6 Hz; 2 g up to 500 Hz
Shock resistance 6 g / 11 ms
Type of coordination 1
Electrical data:
Supply voltage at DC rated value V 24
Operational power for AC-53a at 400 V kW 0.12 0.25 1.1 4 5.5
rated value
Operating frequency, rated value Hz 50 ... 60
Ultimate short-circuit current breaking capacity (Icu)
• at 400 V rated value kA 55
• at 500 V rated value kA 55
Adjustable current response value of the A 0.1 ... 0.4 0.3 ... 1 0.9 ... 3 2.8 ... 9 4 ... 12
inverse-time delayed overload release
Max. current carrying capacity at startup A 4 10 30 90 100
Max. permissible voltage for protective V 500
separation between main and auxiliary circuit
Insulation voltage, rated value V 500
Trip class CLASS 5 and 10 adjustable

Smart Infrastructure, Industrial Control Catalog 2021 6/15

 Hybrid Motor Starters
Load Feeders and Motor Starters for Use in the Control Cabinet
ET 200SP motor starter
General data
ET 200SP motor starters
ET 200SP fail-safe motor starters
Article number 3RK1308- 3RK1308- 3RK1308- 3RK1308- 3RK1308-
0CA00-0CP0 0CB00-0CP0 0CC00-0CP0 0CD00-0CP0 0CE00-0CP0
3RK1308- 3RK1308- 3RK1308- 3RK1308- 3RK1308-
0DA00-0CP0 0DB00-0CP0 0DC00-0CP0 0DD00-0CP0 0DE00-0CP0
Product category Motor starters
General technical specifications:
Width x height x depth mm 30 × 142 × 150
H

Design of the switch contact Hybrid

Design of the motor protection Electronic
Installation altitude at height above sea level, m 2 000
maximum
Mounting position Vertical, horizontal, flat (observe derating)
Type of mounting Can be plugged into BaseUnit
Ambient temperature
• During operation °C -25 ... +60
• During transport °C -40 ... +70
• During storage °C -40 ... +70
Relative humidity during operation % 10 ... 95
Vibration resistance 15 mm up to 6 Hz; 2 g up to 500 Hz
Shock resistance 6 g / 11 ms
Type of coordination 1
Electrical data:
Supply voltage at DC rated value V 24
Operational power for AC-53a at 400 V, kW 0.12 0.25 1.1 4 5.5
rated value

8
Operating frequency, rated value Hz 50 ... 60
6

Ultimate short-circuit current breaking capacity (Icu)

• at 400 V rated value kA 55
HYBRID MOTOR
STARTERS

• at 500 V rated value kA 55

Adjustable current response value of the A 0.1 ... 0.4 0.3 ... 1 0.9 ... 3 2.8 ... 9 4 ... 12
inverse-time delayed overload release
Max. current carrying capacity at startup A 4 10 30 90 100
Max. permissible voltage for protective V 500
separation between main and auxiliary circuit
Insulation voltage, rated value V 500
Trip class CLASS 5 and 10 adjustable

6/16 Smart Infrastructure, Industrial Control Catalog 2021

 Hybrid Motor Starters
Load Feeders and Motor Starters for Use in the Control Cabinet
ET 200SP motor starter
General data
ET 200SP motor starters
BaseUnits for motor starters

Article number 3RK1908- 3RK1908- 3RK1908- 3RK1908- 3RK1908- 3RK1908- 3RK1908- 3RK1908-
0AP00-0AP0 0AP00-0BP0 0AP00-0CP0 0AP00-0DP0 0AP00-0GP0 0AP00-0HP0 0AP00-0JP0 0AP00-0KP0
Product designation BaseUnit
General technical
specifications:
Width x height x depth mm 30 × 215 × 75
H

Ambient temperature
• During operation °C -25 ... +60
• During transport °C -40 ... +70
• During storage °C -40 ... +70
Touch protection against Finger-safe
electric shock
Connections/terminals:
Type of connectable conductor
cross-sections
• At the inputs for supply voltage
- Solid 1 x 0.5 ... 2.5 mm2 --
- Finely stranded 1 x 0.5 ... 2.5 mm2 --
with end sleeve
- Finely stranded 1 x 0.5 ... 2.5 mm2 --
without end sleeve
- Solid for AWG cables 1 x 20 ... 12 --
• For infeed
- Solid 1 x 1 ... 6 mm2 -- 1 x 1 ... 6 mm2 -- 1 x 1 ... 6 mm2 --
- Finely stranded 1 x 1 ... 6 mm2 -- 1 x 1 ... 6 mm2 -- 1 x 1 ... 6 mm2 --
with end sleeve
- Finely stranded 1 x 1 ... 6 mm2 -- 1 x 1 ... 6 mm2 -- 1 x 1 ... 6 mm2 --
without end sleeve
8

- Solid for AWG cables 1 x 18 ... 10 -- 1 x 18 ... 10 -- 1 x 18 ... 10 --

6
• For load-side outgoing feeder
- Solid 1 x 0.5 ... 2.5 mm2
1 x 0.5 ... 2.5 mm2

STARTERS
HYBRID MOTOR
- Finely stranded
with end sleeve
- Finely stranded 1 x 0.5 ... 2.5 mm2
without end sleeve
- Solid for AWG cables 1 x 20 ... 12
Type of electrical connection for Spring-loaded terminals (push-in)
auxiliary and control circuits
Miscellaneous:
Type of screwdriver tip Slotted
Size of screwdriver tip Standard screwdriver 0.6 mm x 3.5 mm

Smart Infrastructure, Industrial Control Catalog 2021 6/17

 Hybrid Motor Starters
Load Feeders and Motor Starters for Use in the Control Cabinet
ET 200SP motor starter
General data
ET 200SP motor starters
3DI/LC control module
Article number 3RK1908-1AA00-0BP0
Product designation 3DI/LC control module
General technical specifications:
Width x height x depth mm 30 × 54.5 × 42.3
H

Type of product Accessories

Number of digital inputs 4
Installation altitude at height above sea level, m 2 000
maximum
Mounting position Vertical, horizontal, flat
Type of mounting Can be plugged onto motor starter
Ambient temperature
• During operation °C -25 ... +60
• During transport °C -40 ... +70
• During storage °C -40 ... +70
Connections/terminals:
Connectable conductor
cross-section for auxiliary contacts
• Solid or stranded mm² 0.2 ... 1.5
• Finely stranded with end sleeve mm² 0.25 ... 1.5
• Finely stranded without end sleeve mm² 0.2 ... 1.5
AWG number as coded connectable conductor 24 ... 16
cross-section
Type of electrical connection for auxiliary and Spring-loaded terminals (push-in)
control circuits
Electrical data:
Type of voltage of the control supply voltage DC

8
6

Control supply voltage at DC rated value V 20.4 ... 28.8

Miscellaneous:
HYBRID MOTOR
STARTERS

Type of screwdriver tip Slotted

Size of screwdriver tip Standard screwdriver 0.6 mm x 3.5 mm

6/18 Smart Infrastructure, Industrial Control Catalog 2021

 Hybrid Motor Starters
Load Feeders and Motor Starters for Use in the Control Cabinet
ET 200SP motor starter
Selection and ordering data IE3/IE4 ready
ET 200SP motor starters

■ Selection and ordering data

Adjustable current response Max. current carrying SD Article No. Price PU (UNIT, PS*
value of the inverse-time capacity at startup per PU SET, M)
delayed overload release at 480V
A A d
Motor starters
Direct-on-line starters
0.1 ... 0.4 3.2 NEW NEU
2 3RK1308-0AA00-0CP0 1 1 unit
0.3 ... 1 8 2 3RK1308-0AB00-0CP0 1 1 unit
0.9 ... 3 24 2 3RK1308-0AC00-0CP0 1 1 unit
2.8 ... 9 72 2 3RK1308-0AD00-0CP0 1 1 unit
4 ... 12 72 2 3RK1308-0AE00-0CP0 1 1 unit

3RK1308-0AB00-0CP0
Reversing starters
0.1 ... 0.4 3.2 NEW NEU
2 3RK1308-0BA00-0CP0 1 1 unit
0.3 ... 1 8 2 3RK1308-0BB00-0CP0 1 1 unit
0.9 ... 3 24 2 3RK1308-0BC00-0CP0 1 1 unit
2.8 ... 9 72 2 3RK1308-0BD00-0CP0 1 1 unit
4 ... 12 72 2 3RK1308-0BE00-0CP0 1 1 unit

3RK1308-0BB00-0CP0
Fail-safe direct-on-line starters
0.1 ... 0.4 3.2 2 3RK1308-0CA00-0CP0 1 1 unit
8

NEW NEU

6
0.3 ... 1 8 2 3RK1308-0CB00-0CP0 1 1 unit
0.9 ... 3 24 2 3RK1308-0CC00-0CP0 1 1 unit
2.8 ... 9 72 2 3RK1308-0CD00-0CP0 1 1 unit

STARTERS
HYBRID MOTOR
4 ... 12 72 2 3RK1308-0CE00-0CP0 1 1 unit

3RK1308-0CE00-0CP0
Fail-safe reversing starters
0.1 ... 0.4 3.2 NEW NEU
2 3RK1308-0DA00-0CP0 1 1 unit
0.3 ... 1 8 2 3RK1308-0DB00-0CP0 1 1 unit
0.9 ... 3 24 2 3RK1308-0DC00-0CP0 1 1 unit
2.8 ... 9 72 2 3RK1308-0DD00-0CP0 1 1 unit
4 ... 12 72 2 3RK1308-0DE00-0CP0 1 1 unit

3RK1308-0DE00-0CP0

Smart Infrastructure, Industrial Control Catalog 2021 6/19

* You can order this quantity or a multiple thereof.

 Hybrid Motor Starters
Load Feeders and Motor Starters for Use in the Control Cabinet
ET 200SP motor starter
Base units and control module
ET 200SP motor starters

Type of product Operational Supply voltage SD Push-in terminals PU (UNIT, PS*

voltage of the DC SET, M)
of the AC infeed Article No. Price
infeed per PU
V V d
BaseUnits1)
For motor starters
• with AC/DC infeed 500 24 2 3RK1908-0AP00-0AP0 1 1 unit
• with DC infeed -- 24 2 3RK1908-0AP00-0BP0 1 1 unit
• with AC infeed 500 -- 2 3RK1908-0AP00-0CP0 1 1 unit
• without infeed -- -- 2 3RK1908-0AP00-0DP0 1 1 unit
For fail-safe motor starters NEW NEU

• with AC infeed, 500 -- 2 3RK1908-0AP00-0GP0 1 1 unit

with F-DI infeed for
3RK1908-0AP00-0AP0 fail-safe motor starters
• with AC infeed, 500 -- 2 3RK1908-0AP00-0HP0 1 1 unit
with F-DI loop-through for
fail-safe motor starters
• without AC/DC infeed, -- -- 2 3RK1908-0AP00-0JP0 1 1 unit
with F-DI loop-through for
fail-safe motor starters
• without AC/DC infeed, -- -- 2 3RK1908-0AP00-0KP0 1 1 unit
with F-DI infeed for
fail-safe motor starters
1)
The voltage is looped-through from BaseUnits with infeed to subsequent
BaseUnits without infeed.

Type of product Supply voltage Loop through the SD Push-in terminals PU (UNIT, PS*
at DC rated potential group SET, M)
value from the left Article No. Price
per PU

8
V d
6

BaseUnits
For dummy modules
HYBRID MOTOR
STARTERS

• dark, looping through the 24 Yes 1 6ES7193-6BP00-0BA0 1 1 unit

potential group
• light, opening a new 24 No 1 6ES7193-6BP00-0DA0 1 1 unit
potential group

6ES7193-6BP00-0BA0

Control supply voltage Product function SD Push-in terminals PU (UNIT, PS*

at DC SET, M)
rated value Local control Digital inputs Article No. Price
parameterizable per PU
V d
3DI/LC control module
20.4 ... 28.8 Yes Yes 2 3RK1908-1AA00-0BP0 1 1 unit

3RK1908-1AA00-0BP0

6/20 Smart Infrastructure, Industrial Control Catalog 2021

* You can order this quantity or a multiple thereof.

 Hybrid Motor Starters
Load Feeders and Motor Starters for Use in the Control Cabinet
ET 200SP motor starter
Accessories
ET 200SP motor starters

Product designation Type of product SD Article No. Price PU (UNIT, PS*

d per PU SET, M)

Accessories
BU cover 15 mm for BaseUnits 1 6ES7133-6CV15-1AM0 1 5 units
Type A0 or A1

6ES7133-6CV15-1AM0
BU cover 30 mm For protection of 2 3RK1908-1CA00-0BP0 1 1 unit
empty slots, 30 mm

3RK1908-1CA00-0BP0
Infeed bus cover For ET 200SP 2 3RK1908-1DA00-2BP0 1 1 unit
(1 bag containing
10 covers)

3RK1908-1DA00-2BP0
Mechanical bracket Mechanical, 2 3RK1908-1EA00-1BP0 1 1 unit
(1 bag containing for ET 200SP
8

6
5 mechanical brackets)

3RK1908-1EA00-1BP0

STARTERS
HYBRID MOTOR
Fan Can be used for 3RK1308 } 3RW4928-8VB00 1 1 unit

3RW4928-8VB00

Motor suppression module

• Square 15 3RK1911-6EA00 1 1 unit

3RK1911-6EA00

• Round 15 3RK1911-6EB00 1 1 unit

3RK1911-6EB00
Starter Kit NEW NEU
consists of 5 3RK1908-1SK00 1 1 unit
3RK1308-0BC00-0CP0
reversing starter
(0.9 ... 3 A),
3RK1908-0AP00-0AP0
BaseUnit with 500 V and
24 V AC/DC infeed, and
EMC distance module
(consisting of
6ES7193-6BP00-0BA0
BaseUnit plus
6ES7133-6CV15-1AM0 BU
cover 15 mm)
3RK1908-1SK00

Smart Infrastructure, Industrial Control Catalog 2021 6/21

* You can order this quantity or a multiple thereof.

Siemens IC 10 · 2020
 Hybrid Motor Starters
Motor Starters for Use in the Field, High Degree of Protection
For Use in the Field, High Degree of Protection
Introduction
Introduction

Overview
Flexible and cost-efficient distributed starter solutions
Be it their high degree of protection, compact design or inte-
grated multifunctionality – our motor starters and soft starters for
use in the field are ideal for realizing distributed drive solutions.
The modular concepts, distributed power supply and integrated
safety technology of our portfolio for a high degree of protection
consistently supports current trends in drive technology.

3RK1304 3RK1315
Type Page
ET 200pro motor starters
Motor starters in the SIMATIC ET 200pro I/O system up to 5.5 kW
Standard motor starters 3RK1304 6/28
High Feature motor starters 3RK1304 6/29
ET 200pro isolator modules • With switch disconnector function for safe disconnection 3RK1304 6/30
Safety modules local • Isolator module, 400 V disconnecting module 3RK1304 6/31
Safety modules PROFIsafe • F-Switch PROFIsafe 6ES7148 6/34
Accessories for ET 200pro motor starters • Incoming power supply, power loop-through connection on the field device, 3RK19 6/35
motor cable, power bus with power terminal connectors
6

ET 200pro – interface modules • For communication with PROFIBUS, PROFINET and IWLAN 6ES71 ST 70
ET 200pro – CPUs • Standard CPUs, fail-safe CPUs 6ES71 ST 70
HYBRID MOTOR
STARTERS

ET 200pro – I/O modules • Digital/analog expansion modules, fail-safe expansion modules, 6ES71 ST 70
power modules, ET 200pro pneumatic interfaces
9

ET 200pro PS • Stabilized power supplies 6ES7148 ST 70

ET 200pro FC-2 frequency converters 6SL35 D 31.2
ET 200pro add-on products • Modules for EtherNet/IP ZNX:EIP ST 70
SIRIUS M200D motor starters
Distributed motor starters up to 5.5 kW
M200D AS-i Basic motor starters 3RK1315 6/47
M200D AS-i Standard motor starters 3RK1325 6/48
M200D communication modules for PROFIBUS 3RK1305 6/55
M200D communication modules for PROFINET 3RK1335 6/55
M200D motor starter modules 3RK1395 6/55
Accessories • Incoming power supply, motor cable, power bus with power terminal connectors 3RK1911 6/59
• Motor control with I/O communication 3RK1902 6/61
• Motor control with AS-i communication 3RK1902 6/62
• Motor control with PROFIBUS 3RK1902 6/64
• Motor control with PROFINET 3RK1902 6/65
Hybrid fieldbus connections
• Passive and active 3RK1911 6/67

6/22 Smart Infrastructure, Industrial Control Catalog 2021

 Hybrid Motor Starters
Motor Starters for Use in the Field, High Degree of Protection
ET 200pro motor starter ET 200pro Motor Starters
General data
General data

■ Overview
ET 200pro motor starters in I/O system ET 200pro
More information
SIMATIC ET 200pro is the modular I/O system with high degree
Homepage,
Homepage, see see www.siemens.com/ET200pro
www.siemens.com/ET200pro
of protection IP65/66/67 for local, cabinet-free use. The
ET 200pro motor starters with the high degree of protection IP65 Industry
Industry Mall,
Mall, see
see www.siemens.com/product?ET200pro
www.siemens.com/product?ET200pro
are an integral part of ET 200pro. Further
Further components
components in in the
the ET
ET 200pro
200pro distributed
distributed I/O
I/O system:
system:
•
• Interface modules, central
Interface modules, central units,
units, I/O
I/O modules,
modules, ETET 200pro
200pro PS,
PS,
see Catalog
see Catalog ST
ST 70
70
• ET200pro
• ET 200proFC-2
FC-2frequency
frequencyconverters,
converters, see
see Catalog
Catalog D 31.2
D 31.2

ET 200pro isolator modules (see page

page6/30)
9/10)
The isolator module with switch disconnector function is used for
safe disconnection of the 400 V operational voltage during
repair work in the plant and provides an integrated group fusing
function (i.e. additional group short-circuit protection for all
subsequently supplied motor starters).
Depending on the power distribution concept, all stations can be
equipped with an isolator module as an option.
Safety applications
Safety Solution local (see page
page6/31)
9/11)
With the Safety local modules
• Safety local isolator module and
• 400 V disconnecting module
ET 200pro motor starter: Isolator module, Standard starter and with an appropriate connection, safety level PL e
High Feature starter mounted on a wide module rack (according to ISO 13849-1) can be reached.
ET 200pro motor starters (see pagespages6/28
9/8 and 9/9)
and 6/29) Safety Solution PROFIsafe (see page6/34)
(see page 9/14)
• Only two variants up to 5.5 kW With the Safety PROFIsafe modules
• All settings can be parameterized by bus • F-Switch and
• 400 V disconnecting module

6
• Comprehensive diagnostic signals
with an appropriate connection, safety levels SIL 3
• Support for PROFIenergy (according to IEC 62061) and PL e (according to ISO 13849-1)

STARTERS
HYBRID MOTOR
• Overload can be acknowledged by remote RESET can also be reached.
• Current asymmetry monitoring

9
Functionality
• Stall protection With the ET 200pro motor starters, any three-phase loads can be
• EMERGENCY START function on overload protected and switched.
• Current value transmission by bus The ET 200pro motor starters are available with mechanical and
• Current limit monitoring also electronic contacts.
• Full support of acyclic services The ET 200pro electromechanical starters are offered as
• Direct-on-line or reversing starters direct-on-line starters (DSe) and reversing starters (RSe) as
• Power bus connection can be plugged in using Han Q4/2 Standard and High Feature versions. There are device versions
connectors with or without control for externally fed brakes with 400 V AC.
• Motor feeder with Han Q8/0 plug Compared with the Standard motor starters, the High Feature,
mechanical motor starter also has:
• Conductor cross-section up to 6 x 4 mm²
• Four digital inputs
• 25 A per segment (power looped through using jumper plug)
• Advanced parameterization options
• In the Standard and High Feature versions
(with 4 DI on-board) The ET 200pro electronic starters are offered as direct-on-line
• Electromechanical switching and electronic switching starters (sDSSte/sDSte) and reversing starters (sRSSte/sRSte) in
the High Feature version.
• Electronic starter for direct activation or with integrated soft
starter function Compared with the High Feature mechanical motor starters, the
• Supplied with 400 V AC brake contact as an option High Feature electronic motor starter also has:
• Temperature sensor can be connected • Soft starting and smooth ramp-down function
(Thermoclick or PTC type A) • Deactivated soft start function as an electronic starter for
• Provision of the motor current in PROFIenergy format to applications with a high switching frequency
higher-level systems, motor current shutdown in dead times • Advanced parameterization options
using PROFIenergy

Smart Infrastructure, Industrial Control Catalog 2021 6/23

 Hybrid Motor Starters

ET 200pro
Motor motor
Starters starter
for Use in the Field, High Degree of Protection
ET 200pro Motor Starters
General data
General data
As a result of the protection concept with solid-state overload • Expansions are easily possible through the subsequent
evaluation and the use of SIRIUS switching devices, size S00, adding of modules. The innovative plug-in technology also
additional advantages are realized on the Standard and does away with the wiring needed up to now. Through the hot
High Feature motor starters – advantages that soon make swapping function (disconnection and connection during
themselves positively felt particularly in manufacturing operation) a motor starter can be replaced within seconds if
processes with high plant stoppage costs: necessary, without having to shut down the ET 200pro station
• Configuration is made easier and flexibility is increased by the and with it the process in the plant. The motor starters are
fine modular structure with ET 200pro. When using ET 200pro therefore recommendable in particular for applications with
motor starters, the parts list per load feeder is reduced to two special demands on availability. Storage costs are also opti-
main items: the bus module and the motor starter. This makes mized by the low level of variance (two units up to 7.5 HP).
the ET 200pro ideal for modular machine concepts or solu- • With four locally acting inputs available on the High Feature
tions for conveying systems and in machine-tool building. motor starter it is possible to realize autonomous special
functions that work independently of the bus and the higher
level control system, e.g. as a quick stop on gate valve
controls or limit position disconnectors. In parallel with this, the
states of these inputs are signaled to the control system.
Article No. scheme

Product versions Article number

Motor starters 3RK1304 – 5 @ S @ 0 – @ A A @
Setting range 0.15 ... 2.0 A K
1.5 ... 12 A L
Product function Direct-on-line starters DSe 4 4 Standard
Reversing starters RSe 4 5 Standard
Direct-on-line starters DSe 4 2 High Feature
Reversing starters RSe 4 3 High Feature
Direct-on-line starters 7 2 High Feature
sDSSte/sDSte
Reversing starters sDSSte/sDSte 7 3 High Feature
Inputs/outputs Without brake output 0
With brake output 3 400 V AC, with High Feature + 4 inputs
6

Example 3RK1304 – 5 K S 4 0 – 4 A A 0
HYBRID MOTOR
STARTERS

Product versions Article number

9

Modules 3RK1304 – 0 H S 0 0 – @ A A 0
Product function Isolator modules 6
Isolator modules 7 Safety modules local
400 V disconnecting modules 8 Safety modules local/PROFIsafe
Example 3RK1304 – 0 H S 0 0 – 6 A A 0

Note:
The Article No. scheme shows an overview of product versions
for better understanding of the logic behind the article numbers.
For your orders, please use the article numbers quoted in the
selection and ordering data.

6/24 Smart Infrastructure, Industrial Control Catalog 2021

Hybrid Motor Starters
Motor Starters for Use in the Field, High Degree of Protection
ET 200pro motor starter ET 200pro Motor Starters
General data
General data

Type Standard motor starters High Feature motor starters

Technology designation1) DSe, RSe DSe, RSe sDSSte, sDSte,
sRSSte, sRSte
Device functions (firmware features)
Parameterizable rated operational current ✓
Integrated short-circuit protection ✓
Parameterizable current limit values -- ✓ 2 limit values
Parameterizable response in case of current limit violation -- ✓
Zero current monitoring ✓
Parameterizable response in case of zero current violation ✓
Parameterizable current asymmetry limit % -- Fixed limit value (30 x Ie) ✓ 30 ... 60 x Ie
Parameterizable response in case of asymmetry limit violation ✓
Motor blocking monitoring -- ✓
Parameterizable blocking current limit % -- ✓ 150 ... 1 000 x Ie
Parameterizable blocking time limit s -- ✓ 1 ... 5
Current value transmission ✓
Group warning diagnostics -- ✓ Parameterizable
Group diagnostics ✓ Parameterizable
EMERGENCY START ✓
Digital inputs -- ✓ 4 inputs
• Parameterizable input signal -- ✓ Latching/non-latching
• Parameterizable input level -- ✓ NC/NO contacts
• Parameterizable input signal delay ms -- ✓ 10 ... 80
• Parameterizable input signal extension ms -- ✓ 0 ... 200
• Parameterizable input control actions -- ✓ 12 different actions
Brake output (400 V AC) ✓ Order option
Parameterizable brake enabling delay s ✓ -2.5 ... +2.5
Parameterizable holding time of the brake during stopping s ✓ 0 ... 25
Parameterizable startup type -- ✓
Parameterizable ramp-down time -- ✓

6
Parameterizable starting voltage -- ✓
Parameterizable stopping voltage -- ✓

STARTERS
HYBRID MOTOR
Local device interface ✓
Firmware update ✓ By specialists

9
Thermal motor model ✓
Parameterizable trip class -- CLASS 10 fixed ✓ CLASS 5, 10, 15, 20
Parameterizable response in case of overload of thermal motor -- ✓ 3 possible states
model
Advance warning limit for motor heating % -- ✓ Parameterizable 0 ... 95
Advance warning limit time-related trip reserve s -- ✓ Parameterizable 0 ... 500
Parameterizable recovery time min -- ✓ 1 ... 30
Parameterizable protection against voltage failure -- Permanently integrated ✓
Reversing start function ✓ Order option
Parameterizable interlock time for reversing starters -- 150 ms fixed ✓ 0 ... 60 s
Integrated logbook functions ✓ 3 device logbooks
Integrated statistics data memory ✓
Parameterizable response in case of CPU/master stop ✓
PROFIenergy profile support
• Disconnection of the motor current during idle times ✓
• Measured motor current values ✓
Device indications
• Group fault SF LED (red)
• Switching state STATE LED (red, yellow, green)
• Device status DEVICE LED (red, yellow, green)
• Digital inputs -- IN 1 ... IN 4, LED
✓ Function available
-- Function not available
1) DS .... Direct-on-line starters
RS .... Reversing starters
DSS .. Direct-on-line soft starters
RSS .. Reversing soft starters
e ....... Electronic motor protection
te ...... Full motor protection (thermal + electronic)
s ....... Electronic switching with semiconductor.

Smart Infrastructure, Industrial Control Catalog 2021 6/25

Siemens IC 10 · 2020
 Hybrid Motor Starters
Motor Starters for Use in the Field, High Degree of Protection
ET 200pro motor starter
ET 200pro Motor Starters
General data
General data

■ Benefits
ET 200pro motor starters provide the following advantages: • Extensive diagnostics and information for preventive
• High flexibility thanks to a modular and compact design maintenance
• Little variance among all motor starter versions • Parameterizable inputs for on-site control functions
(two units up to 5.5 kW) (High Feature)
• Extensive parameterization using STEP 7 HW Config • Cabinet-free design thanks to high degree of protection IP65
• Increase of plant availability through fast replacement of units
(easy mounting and plug-in technology)

■ Application
The SIMATIC ET 200pro motor starters are ideal for the use of Use of ET 200pro motor starters in conjunction with
several spatially concentrated distributed drive solutions in IE3/IE4 motors
which several motors, or digital or analog sensors and actuators
are addressed from a distributed station. They are perfectly Note:
suited for protecting and switching any AC loads. For the use of ET
use of ET 200pro
200pro motor
motorstarters
startersininconjunction
conjunctionwith
with highly
highly
energy-efficient IE3/IE4
energy-efficient IE3/IE4 motors,
motors, please
please observe
observe the information
the information
Application areas on dimensioning
dimensioningand andconfiguring;
configuring;
seesee Application
Application Manual.
Manual.
The SIMATIC ET 200pro motor starters are suitable for numerous
sectors of industry, e.g. machinery and plant engineering or
conveying applications.
6 STARTERS
HYBRID MOTOR
9

6/26 Smart Infrastructure, Industrial Control Catalog 2021

Hybrid Motor Starters
Motor Starters for Use in the Field, High Degree of Protection
ET 200pro motor starter ET 200pro Motor Starters
General data
General data

Technical specifications
More information
Equipment
Equipment Manual,
Manual, see
see Notes
Notes on security:
security:
https://support.industry.siemens.com/cs/ww/en/view/22332388
https://support.industry.siemens.com/cs/ww/en/view/22332388 System networking
networking requires
requires suitable
suitableprotective
protectivemeasures
measures(including
(including network
network
segmentation for IT
segmentation for IT security)
security)ininorder
ordertotoensure
ensuresafe
safeplant
plantoperation.
operation.
For more
For information on
more information on the
the subject
subjectof ofIndustrial
IndustrialSecurity,
Security,see
see
www.siemens.com/industrialsecurity.
www.siemens.com/industrialsecurity.

Type Standard motor starters High Feature motor starters

Mechanical switching Mechanical switching Electronic switching
without inputs with inputs with inputs and
soft starter function
Technology designation1) DSe, RSe DSe, RSe sDSSte, sDSte,
sRSSte, sRSte
Mechanics and environment
Motor starters or modules that can be connected to ET 200pro max. 8
With width of 110 mm
Mounting dimensions (W x H x D)
• Direct-on-line starters and reversing starters mm 110 x 230 x 150 110 x 230 x 160
Permissible ambient temperature
• During operation °C -25 ... +55, from +40 with derating
• During storage °C -40 ... +70
Permissible mounting position Vertical, horizontal
Vibration resistance acc. to IEC 60068, Part 2-6 g 2
Shock resistance acc. to IEC 60068, Part 2-27 g/ms Half-sine 15/11
Degree of protection IP65
Pollution degree 3, IEC 60664 (IEC 61131)
Electrical specifications
Power consumption at 24 V DC
• From auxiliary circuit L+/M (U1) mA Approx. 40
• From auxiliary circuit A1/A2 (U2) mA Approx. 200
Rated operational current Ie for power bus A 25

6
Rated operational voltage Ue V AC 400 (50/60 Hz)
• Approval according to EN 60947-1, Appendix N V AC Up to 400 (50/60 Hz) Up to 400 (50/60 Hz)
• Approval according to CSA and UL V AC Up to 600 (50/60 Hz) Up to 480 (50/60 Hz)

STARTERS
HYBRID MOTOR
Approval

9
• DIN VDE 0106, Part 101 V Up to 400 Up to 480
• CSA and UL approval V Up to 600 Up to 480
Conductor cross-sections
• Incoming power supply mm 2 Max. 6 x 4
Touch protection Finger-safe
Rated impulse withstand voltage Uimp kV 6
Rated insulation voltage Ui V 400
Rated operational current Ie for starters
• AC-1 / 2 / 3 at 40 °C - At 400 V A 0.15 ... 2.0/1.5 ... 12.0 0.15 ... 2.0/1.5 ... 12.02)
- At 500 V A 0.15 ... 2.0/1.5 ... 9.0
• AC-4 at 40 °C - At 400 V A 0.15 ... 2.0/1.5 ... 4.0
Rated short-circuit breaking capacity kA 100 at 400 V
Type of coordination acc. to IEC 60947-4-1 1
Power of three-phase motors at 400 V kW Max. 5.5 Max. 5.5/43)
Utilization categories AC-1, AC-2, AC-3, AC-4 AC-53a4) (max. 9 A with
deactivated soft start
function up to CLASS 10)
Protective separation between main and auxiliary circuits V 400, acc. to EN 60947-1, Appendix N
Endurance of contactor
• Mechanical Operating cycles 30 million --
• Electrical Operating cycles Up to 10 million; depending on the current loading --
(see manual)
Permissible switching frequency Depending on the current loading, motor starting time, and relative ON period
(see manual)
Operating times for 0.85 ... 1.1 x Ue
• Closing delay ms 11 ... 50 --
• Opening delay ms 5 ... 45 --
1) 2)
DS .... Direct-on-line starters If the soft starter control function is deactivated, the permissible rated
RS .... Reversing starters operational current is reduced to 9 A up to CLASS 10.
DSS .. Direct-on-line soft starters 3)
With parameterization as electronic starter max. 4 kW.
RSS .. Reversing soft starters 4) 8-hour operation.
e ....... Electronic motor protection
te ...... Full motor protection (thermal + electronic)
s ....... Electronic switching with semiconductor.

Smart Infrastructure, Industrial Control Catalog 2021 6/27

Siemens IC 10 · 2020
 Hybrid Motor Starters
Motor Starters for Use in the Field, High Degree of Protection
ET 200pro motor starter
ET 200pro Motor Starters
Standard motor starter IE3/IE4 ready
Standard motor starters

■ Overview
The functionality,
functionality,device
devicefunctions,
functions,and technical
and specifications
technical specifications
of the Standard motor starter
Standard motor starterare
aredescribed
describedinin“ET
"ET200pro
200proMotor
Motor
Starters, General
Generaldata”
data"see
(seepage
page 9/3onwards.
6/23 onwards).

■ Selection and ordering data

Version SD Article No. Price PU PS*
per PU (UNIT,
SET, M)
d
Standard motor starters, mechanical
Motor protection: thermal model
DSe direct-on-line starters1)
• Without brake output 2 3RK1304-5@S40-4AA0 1 1 unit
• With brake output 400 V AC 2 3RK1304-5@S40-4AA3 1 1 unit
RSe reversing starters1)
• Without brake output 2 3RK1304-5@S40-5AA0 1 1 unit
• With brake output 400 V AC 2 3RK1304-5@S40-5AA3 1 1 unit

Setting range Additional

Rated operational current price
DSe Standard • 0.15 ... 2.0 A K None
• 1.5 ... 12.0 A L ✓

✓ = Additional price
1) Only functions when
when used
used together
togetherwith
withthe
thebackplane
backplanebus
busmodule
moduleand
andthe
the
backplane bus module and the wide module
wide module rack. The backplane module rack
rack
must be
be ordered
ordered separately (see "Accessories
“Accessoriesfor
forET
ET200pro
200promotor
motor
starters",
starters”,page
page9/19).
6/39).
6 STARTERS
HYBRID MOTOR
9

6/28 Smart Infrastructure, Industrial Control Catalog 2021

* You can order this quantity or a multiple thereof.

 Hybrid Motor Starters
Motor Starters for Use in the Field, High Degree of Protection
ET 200pro motor starter ET 200pro Motor Starters
High Feature motor starter IE3/IE4 ready
High Feature motor starters

■ Overview
The functionality,
functionality,device
devicefunctions,
functions,and
and technical
technical specifications
specifications The High Feature motor starter differs from the Standard motor
of
of the High Feature
the High Featuremotor
motorstarter
starterare
aredescribed
describedin in
“ET"ET 200pro
200pro starter in having more parameters and four integrated, freely-
Motor
Motor Starters, Generaldata”
Starters, General data"see
(seepage
page 9/3onwards.
6/23 onwards). parameterizable digital inputs.

■ Selection and ordering data

Version SD Article No. Price PU PS*
per PU (UNIT,
SET, M)
d
High Feature motor starters, mechanical
Motor protection: thermal model
DSe direct-on-line starters1)
• Without brake output and with 4 inputs 2 3RK1304-5@S40-2AA0 1 1 unit
• With brake output 400 V AC and 4 inputs 5 3RK1304-5@S40-2AA3 1 1 unit
RSe reversing starters1)
• Without brake output and with 4 inputs 2 3RK1304-5@S40-3AA0 1 1 unit
• With brake output 400 V AC and 4 inputs 2 3RK1304-5@S40-3AA3 1 1 unit

Setting range Additional

Rated operational current price
RSe High Feature • 0.15 ... 2.0 A None
K
• 1.5 ... 12.0 A L ✓
High Feature motor starters2), electronic
Full motor protection, comprising thermal motor protection and thermistor
motor protection
sDSSte/sDSte direct-on-line starters1)2)
• Without brake output and with 4 inputs 2 3RK1304-5@S70-2AA0 1 1 unit
• With brake output 400 V AC and 4 inputs 5 3RK1304-5@S70-2AA3 1 1 unit
Reversing starters sRSSte/sRSte1)2)

6
• Without brake output and with 4 inputs 2 3RK1304-5@S70-3AA0 1 1 unit
• With brake output 400 V AC and 4 inputs 2 3RK1304-5@S70-3AA3 1 1 unit

STARTERS
HYBRID MOTOR
Setting range Additional
Rated operational current price

9
sRSSte High Feature • 0.15 ... 2.0 A None
K
• 1.5 ... 12.0 A L ✓
✓ = Additional price
1) Only
Only functions
functions when
whenused
usedtogether
togetherwith
withthe
thebackplane
backplanebusbusmodule
moduleand
andthe
the
wide module
wide module rack.
rack. The
The backplane
backplane busbus module
module and
and the
the wide
wide module
module rack
rack
must be
must be ordered
ordered separately
separately (see
(see "Accessories
“AccessoriesforforETET 200pro
200pro motor
motor
starters",
starters”,page
page9/19).
6/39).
2)
The electronic motor starters can be used not only as electronic motor
starters with a high level of switching frequency but also as fully fledged
soft starters for soft starting and stopping. The changeover from motor
starter to soft starter takes place through reparameterization in HW Config.
Depending on the setting, this results in the following current ranges:
- Parameterization as electronic motor starter: 0.15 to 2 A and
1.5 to 9 A (4 kW)
- Parameterization as soft starter: 0.15 to 2 A and 1.5 to 12 A (5.5 kW).

Smart Infrastructure, Industrial Control Catalog 2021 6/29

* You can order this quantity or a multiple thereof.

 Hybrid Motor Starters
Motor Starters for Use in the Field, High Degree of Protection
ET 200pro motor starter
ET 200pro Motor Starters
Isolator modules IE3/IE4 ready
ET 200pro isolator modules

■ Overview
The isolator module with integrated group fusing function The following properties apply to the isolator module:
(i.e. additional group short-circuit protection for all subsequently • Increase of plant availability through fast replacement of units
supplied motor starters) and switch disconnector function is (easy mounting and plug-in technology)
used for safe disconnection of the 400 V operational voltage in
the plant. • Cabinet-free design thanks to high degree of protection IP65

Depending on the power distribution concept, all stations can be isolator module
The isolator moduleisisavailable
available
in in addition
addition in ainsafety
a safety version
version
equipped with an isolator module as an option. (see “Safety
"Safety local
local isolator module"
module”on onpage
page 9/11).
6/31).

■ Technical specifications
Type Isolator modules Type Isolator modules
General data Degree of protection IP65
Mounting dimensions (W x H x D) Touch protection Finger-safe
• Direct-on-line starters and reversing mm 110 x 230 x 170 Pollution degree 3, IEC 60664 (IEC 61131)
starters
Rated impulse withstand kV 6
Permissible ambient temperature voltage Uimp
• During operation °C -25 ... +55
• During storage °C -40 ... +70 Rated insulation voltage Ui V 400
Permissible mounting position Any Rated operational current Ie
for starters
Vibration resistance acc. to g 2
IEC 60068 Part 2-6 • AC-1/2/3 at 40 °C
- At 400 V A 25
Shock resistance acc. to IEC 60068 g/ms Half-sine 15/11 - At 500 V A 25
Part 2-27
Rated short-circuit breaking kA 50 at 400 V
Power consumption capacity
• From auxiliary circuit L+/M (U1) mA Approx. 20
• From auxiliary circuit A1/A2 (U2) -- Type of coordination acc. to 2
IEC 60947-4-1
Rated operational current Ie A 25
for power bus Protective separation between V 400, according to
main and auxiliary circuits DIN VDE 0106, Part 101
Rated operational voltage Ue V 400
Device functions
Approvals according to • Group diagnostics Yes, parameterizable
• DIN VDE 0106, Part 101 V Up to 500
Device indications
6

• CSA and UL V Up to 600

• Group fault SF LED (red)
Conductor cross-sections
• Incoming power supply mm2 Max. 6 x 4
HYBRID MOTOR
STARTERS
9

■ Selection and ordering data

Version SD Article No. Price PU PS*
per PU (UNIT,
SET, M)
d
ET 200pro isolator modules, mechanical
Isolator modules1)
Rated operational current 25 A 2 3RK1304-0HS00-6AA0 1 1 unit

3RK1304-0HS00-6AA0
1) Only
Only functions when used
used together
togetherwith
withthe
therelated
related110
110mm
mmbackplane
backplanebus
bus
module and the wide module rack. The backplane bus module and the
wide module rack must be ordered separately (see page 6/39).
9/19).

6/30 Smart Infrastructure, Industrial Control Catalog 2021

* You can order this quantity or a multiple thereof.

 Hybrid Motor Starters Motor Starters for Use in the Field, High Degree of Protection
ET 200pro Motor Starters
ET 200pro motor starter ET 200pro Safety Motor Starters Solutions Local/PROFIsafe
Safety modules
Safety modules local

■ Overview
Safety Solution local Functionality
With the Safety local modules Safety local isolator module
• Safety local isolator module and
• 400 V disconnecting module The Safety local isolator module features the same functions as
with an appropriate connection, safety level PL e a standard isolator module with an additional local safety
(according to ISO 13849-1) can be reached. function.
The Safety local isolator module contains a 3TK2841 module
and is equipped with M12 terminals for the connection of
external safety components.
Terminals 1 and 2 can be used to connect either one- or two-
channel EMERGENCY STOP circuits or protective door circuits
(IN 1, IN 2).
For monitored starts, an external START switch can be
connected to terminal 3.
The required safety functions can be set using two slide
switches located under the left M12 opening.
In the event of an EMERGENCY STOP, the Safety local isolator
module trips the downstream 400 V disconnecting module. This
safely separates the 400 V circuit up to PL e.
In combination with the 400 V disconnecting module, the
Safety local isolator module can be used for safety applications
up to PL e.
400 V disconnecting module
ET 200pro motor starter (Safety Solution local): Safety local isolator
module, disconnecting module, Standard starter and High Feature The 400 V disconnecting module can be used together with the
starter mounted on a wide module rack Safety local isolator module for local safety applications and
together with the F-Switch for PROFIsafe safety applications.
Safety local isolator module
It contains two contactors connected in series for safety-related

6
The Safety local isolator module is a repair switch with integrated disconnection of the main circuit.
safety evaluation functions that can be parameterized using
DIP switches. The auxiliary circuit supply of the device is over a safety power

STARTERS
HYBRID MOTOR
rail in the backplane bus module.
It is used for

9
• Connection of a one- or two-channel EMERGENCY STOP The 400 V disconnecting module can be used in conjunction
circuit up to PL e (protective door or EMERGENCY STOP with the Safety local isolator module or with the F-Switch for
pushbuttons) and parameterizable start behavior safety applications up to PL e.
• For controlling the 400 V disconnecting module by means of a
safety rail signal
400 V disconnecting module
The 400 V disconnecting module enables the safe disconnec-
tion of an operational voltage of 400 V up to PL e. For operation
in a Safety Solution local application, it functions only in
combination with the Safety local isolator module.
For operation in a Safety PROFIsafe application it functions only
in combination with the F-Switch.

Smart Infrastructure, Industrial Control Catalog 2021 6/31

 Motor
Hybrid Starters
Motor Startersfor
Use in the Field, High Degree of Protection
ET 200pro Motor Starters
ET 200pro motor starter
ET 200pro Safety Motor Starters Solutions Local/PROFIsafe
Safety modules
Safety modules local

■ Technical specifications
Type Safety local isolator module 400 V disconnecting module
General data
Mounting dimensions (W x H x D)
• Direct-on-line starters and reversing starters mm 110 x 230 x 170 110 x 230 x 150
Permissible ambient temperature
• During operation °C -25 ... +55
• During storage °C -40 ... +70
Permissible mounting position Any
Vibration resistance acc. to IEC 60068, Part 2-6 2g
Shock resistance acc. to IEC 60068, Part 2-27 Half-sine 15 g/11 ms
Power consumption
• From auxiliary circuit L+/M (U1) mA Approx. 20
• From auxiliary circuit A1/A2 (U2) --
Rated operational current Ie for power bus A 25
Rated operational voltage Ue V 400 (50/60 Hz)
Approval DIN VDE 0106, Part 101 V Up to 500
CSA and UL approval V Up to 600
Conductor cross-sections
Incoming power supply mm2 Max. 6 x 4
Degree of protection IP65
Touch protection Finger-safe
Pollution degree 3, IEC 60664 (IEC 61131)
Rated impulse withstand voltage Uimp kV 6
Rated insulation voltage Ui V 400
Rated operational current Ie for starters
• AC-1/2/3 at 40 °C
- At 400 V A 16 25
- At 500 V A 16 25
Rated short-circuit breaking capacity kA 50 at 400 V
6

Type of coordination acc. to IEC 60947-4-1 2

Protective separation between main and auxiliary circuits V 400,
according to DIN VDE 0106, Part 101
HYBRID MOTOR
STARTERS

Operating times for 0.85 ... 1.1 x Ue

• Closing delay ms -- 25 ... 100
9

• Opening delay ms -- 7 ... 10

Device functions
• Group diagnostics Yes, parameterizable
Device indications
• Group fault SF LED (red)

6/32 Smart Infrastructure, Industrial Control Catalog 2021

 Hybrid Motor Starters Motor Starters for Use in the Field, High Degree of Protection
ET 200pro Motor Starters
ET 200pro motor starter ET 200pro Safety Motor Starters Solutions Local/PROFIsafe
Safety modules IE3/IE4 ready
Safety modules local

■ Selection and ordering data

Version SD Article No. Price PU PS*
per PU (UNIT,
SET, M)
d
Safety modules local
Safety local isolator module1)2)
Rated operational current 16 A 5 3RK1304-0HS00-7AA0 1 1 unit

3RK1304-0HS00-7AA0
400 V disconnecting modules3)4)
Rated operational current 25 A 2 3RK1304-0HS00-8AA0 1 1 unit

3RK1304-0HS00-8AA0
1)
The Safety local isolator module only functions when used together with
the 400 V disconnecting module.
2) Only
Only in combination
combination with with the
the special
special backplane
backplane bus
bus module
module for
for the
the
Safety local
Safety local isolator
isolator module
module (see
(see "Accessories
“AccessoriesforforETET200pro motor
200pro motor
starters",
starters”,page
page9/19).
6/39).
3)
The 400 V disconnecting module functions only when used together with

6
the Safety local isolator module or with the F-Switch.
4) The 400 V disconnecting module functions only when used together with
The 400 V disconnecting module functions only when used together with
the
the backplane
backplane bus module and and the
the wide
wide module
module rack.
rack. The
The backplane
backplane bus
bus

STARTERS
HYBRID MOTOR
module
module andand the
the wide
wide module
module rackrack must
must bebe ordered
ordered separately
separately (see
(see
"Accessories
“Accessoriesfor forETET200pro
200pro motor
motorstarters", page
starters”, 9/19).
page 6/39).

Smart Infrastructure, Industrial Control Catalog 2021 6/33

* You can order this quantity or a multiple thereof.

 Motor
Hybrid Starters
Motor Startersfor
Use in the Field, High Degree of Protection
ET 200pro Motor Starters
ET 200pro motor starter
ET 200pro Safety Motor Starters Solutions Local/PROFIsafe
Safety modules PROFIsafe IE3/IE4 ready
Safety modules PROFIsafe

■ Overview
Safety Solution PROFIsafe Functionality
With the Safety PROFIsafe modules The PROFIsafe F-Switch is a fail-safe solid-state module for
• F-Switch and PROFIsafe safety applications. It has two fail-safe inputs and
• 400 V disconnecting module outputs for safe switching of the 24 V supply over backplane
with an appropriate connection, safety levels SIL 3 busbars. In combination with the 400 V disconnecting module,
(according to IEC 62061) and PL e (according to ISO 13849-1) fail-safe disconnection of ET 200pro motor starters is possible in
can be reached. PROFIsafe applications up to SIL 3/PL e.
F-Switch PROFIsafe 400 V disconnecting module
Fail-safe digital inputs/outputs in degrees of protection IP65 to See "Safety
“Safetymodules
moduleslocal",
local”,Overview,
Overview,page
page9/11
6/31and
and Technical
Technical
IP67 for near-machine, cabinet-free use. specifications, page
page6/32
9/12.
.
Fail-safe digital inputs
• For the fail-safe reading in of sensor information
(one-/two-channel)
• Including integrated discrepancy evaluation for 2v2 signals
• Internal sensor supplies (incl. testing) available
Fail-safe digital outputs
• Three fail-safe PP-switching outputs for safe switching of the
backplane busbars
The F-Switch is certified up to SIL 3/PL e and has detailed
diagnostics.
It supports PROFIsafe in PROFIBUS configurations as well as in
PROFINET configurations.

■ Selection and ordering data

Version SD Article No. Price PU PS*
per PU (UNIT,
6

SET, M)
d
HYBRID MOTOR
STARTERS

Safety modules PROFIsafe

400 V disconnecting modules1)2)
9

Rated operational current 25 A 2 3RK1304-0HS00-8AA0 1 1 unit

3RK1304-0HS00-8AA0
F-Switch PROFIsafe
24 V DC, including bus module 1 6ES7148-4FS00-0AB0 1 1 unit
Note:
Connection module must be ordered separately

6ES7148-1FS00-0AB0
Connection modules for F-Switch
24 V DC 1 6ES7194-4DA00-0AA0 1 1 unit
1) The 400 V disconnecting module functions only when used together with
the Safety local isolator module or with the F-Switch.
2) The 400 V disconnecting module functions only when used together with
400 V disconnecting module functions only when used together with
the backplane
backplane bus module and the wide wide module
module rack.
rack. The
The backplane
backplane bus
bus
module and the wide
wide module
module rack
rack must
must be
be ordered
ordered separately
separately (see
(see
"Accessories
“AccessoriesforforETET200pro
200promotor
motor starters", page
starters”, 9/19).
page 6/39).

6/34 Smart Infrastructure, Industrial Control Catalog 2021

* You can order this quantity or a multiple thereof.

 Hybrid Motor Starters Motor Starters for Use in the Field, High Degree of Protection
ET 200pro Motor Starters
ET 200pro motor starter
Accessories
Accessories for ET 200pro motor starters

■ Overview

Infeed on
isolator module
1

RSM RSM

MS MS MS MS

NSA0_00467a
NSA0_00465a
3 4 7
2 9

5 / 6

M M 9 Power connection cable for isolator module

Basic design of an ET 200pro version with (from the left) connection Infeed on the RSM isolator module
module for IM, interface module for communication (IM), RSM isolator
module, two ET 200pro motor starters (MS), and connections for energy

6
Legend:
Legend:
Infeed on  Power
Power feeder plug(see
feeder plug (see page
page 9/17)
6/37)

STARTERS
HYBRID MOTOR
ET 200pro motor starter b Power
Power connection plug(see
connection plug (see page
page 9/17)
6/37)
c Power
Power jumper plug(see
jumper plug (see page
page 9/17)
6/37)

9
d Motor
Motor connection plug(see
connection plug (see page
page 9/17)
6/37)
e Motor
Motor plug (seepage
plug (see page 9/17)
6/37)
f Motor
Motor plug withEMC
plug with EMCsuppressor
suppressor circuit
circuit (see(see
pagepage
6/37)9/17)
MS MS g Power
Power loop-through plug(see
loop-through plug (see page
page 9/17)
6/37)
h Power connection cable (see page 9/17)
Power connection cable (see page 6/37)
i Power connection cable for isolator module (see page 9/17)
Power connection cable for isolator module (see page 6/37)
j Motor cable (see page 9/18)
Motor cable (see page 6/38)
NSA0_00466a

10
8

Infeed on the ET 200pro motor starter

Smart Infrastructure, Industrial Control Catalog 2021 6/35

 Motor
Hybrid Starters
Motor Startersfor
Use in the Field, High Degree of Protection
ET 200pro
ET 200pro Motor Starters
motor starter
Accessories
Accessories for ET 200pro motor starters
Power bus Interruption-free thanks to power terminal connectors
The power supply to the field devices (ET 200pro motor starters, In finger-safe connection technology the power T terminal
M200D motor starters) is provided via the power bus, in which connectors and power double-T terminal connectors connect
the power T terminal connectors or power double-T terminal the components of a feeder to the power bus. They ensure
connectors are connected by power bus cables. interruption-free operation, i.e. the power bus is not interrupted
when the components are unplugged.
Feeders
From the terminal connectors, spur lines with Han Q4/2 plugs
lead to the field devices, from which the motors are supplied with
power via motor connection cables.

11 Power bus line (sold by the meter)

12 Power T terminal connector
13 Power double-T terminal connector

11
12 13 13

ET 200pro

M200D M200D

IC01_00230a
6 STARTERS
HYBRID MOTOR
9

Motors

Power supply to the motors via the power bus with power T and double-T terminal connectors linked by power bus cables, spur lines to the field devices
(motor starters), and power loop-through connections to the motors via motor connection cables
Motor control via PROFIBUS Motor control via PROFINET
The interface modules (IM) for PROFIBUS can be combined For connection
For connectionmodules
moduleswith
with
thethe relevant
relevant accessories,
accessories, see see
with three different connection modules for connecting "Accessories for
“Accessories for ET
ET 200pro
200pro interface
interface modules"
modules”ininCatalog
Catalog ST
ST 70
70
PROFIBUS DP and the power supply: or the
or the Industry
Industry Mall.
Mall.
• Direct connection with cable gland
• ECOFAST connection with hybrid fieldbus cables (with two
copper cores for data transmission with PROFIBUS DP, and
four copper cores for the power supply), and ECOFAST plugs
(HanBrid)1)
• M12, 7/8" connection
- with M12 connecting cable and M12 plugs for data
transmission with PROFIBUS DP
- with 7/8" connecting cable and 7/8" plugs for the power
supply2)
For connection
connectionmodules
moduleswith
withthethe relevant
relevant accessories,
accessories, seesee
"Accessories
“Accessories for
forET
ET 200pro
200pro interface
interface modules"
modules”ininCatalog
CatalogST
ST70
70
or
or the
the Industry
Industry Mall.
Mall.

1) Hybrid 2)
Hybrid fieldbus
fieldbus connections
connections with
with HanBrid sockets designed as cabinet cabinet bushings
On the control cabinet bushings with
with two
twoM12
M12sockets
socketsfor
forthe
thePROFIBUS
PROFIBUS
bushings transmit
bushings transmit data and energy from the control cabinet
cabinet (IP20)
(IP20) to the
the 9/46), the
M12 connecting cables (see page 6/66), the 24
24 VV supply
supply of
of the
the motor
motor
field (IP65).
field (IP65). They
They are
are the interface
interface for jointly routing PROFIBUS
PROFIBUS DP DP and
and the
the starters is implemented via separate 7/8"
7/8" connecting
connecting cables.
cables.
auxiliary voltages
auxiliary voltages into
into the hybrid
hybrid fieldbus
fieldbus cable
cable (see
(see page
page 6/66).
9/46).

6/36 Smart Infrastructure, Industrial Control Catalog 2021

Hybrid Motor Starters Motor Starters for Use in the Field, High Degree of Protection
ET 200pro Motor Starters
ET 200pro motor starter
Accessories
Accessories for ET 200pro motor starters

Selection and ordering data

Version SD Article No. Price PU PS*
per PU (UNIT,
SET, M)
d
Incoming power supply
 Power feeder plugs
Connector set for incoming power supply, e.g. for
connecting to T terminal connectors, comprising a
coupling enclosure, straight outgoing feeder (with
bracket), pin insert for HAN Q4/2, incl. gland
• 5 male contacts, 2.5 mm2 5 3RK1911-2BS60 1 1 unit
• 5 male contacts, 4 mm2 5 3RK1911-2BS20 1 1 unit
• 5 male contacts, 6 mm2 5 3RK1911-2BS40 1 1 unit
 Power connection plugs
Connector set for incoming power supply for connection
to ET 200pro motor starters/ET 200pro isolator modules,
comprising a cable-end connector hood, angular
outgoing feeder, female insert for HAN Q4/2,
incl. gland
• 5 female contacts, 2.5 mm2 5 3RK1911-2BE50 1 1 unit
• 5 female contacts, 4 mm2 5 3RK1911-2BE10 1 1 unit
• 5 female contacts, 6 mm2 5 3RK1911-2BE30 1 1 unit
 Power connection cables, assembled at one end
Power connection cable for ET 200pro motor starters,
open at one end, for HAN Q4/2, angular, 4 x 4 mm2
• Length 1.5 m 5 3RK1911-0DB13 1 1 unit
• Length 5.0 m 5 3RK1911-0DB33 1 1 unit
 Power connection cables for isolator module,
assembled at one end
Power connection cable for ET 200pro isolator modules,
open at one end, for HAN Q4/2, angular, insert turned at
isolator module end, 4 x 4 mm2
• Length 1.5 m 30 3RK1911-0DF13 1 1 unit
• Length 5.0 m 30 3RK1911-0DF33 1 1 unit

6
Power loop-through on the field device
 Power jumper plugs 2 3RK1922-2BQ00 1 1 unit

STARTERS
HYBRID MOTOR
 Power loop-through plugs
Connector set for power loop-through for connection to

9
ET 200pro motor starters/ET 200pro isolator modules,
comprising a cable-end connector hood, angular
outgoing feeder, pin insert for HAN Q4/2,
incl. gland
• 4 male contacts, 2.5 mm2 5 3RK1911-2BF50 1 1 unit
• 4 male contacts, 4 mm2 5 3RK1911-2BF10 1 1 unit
Motor cables
 Motor connection plugs
Connector set for motor cable for connection to
ET 200pro motor starters, comprising a cable-end
connector hood, angular outgoing feeder, pin insert
for HAN Q8/0, incl. gland
• 8 male contacts, 1.5 mm2 5 3RK1902-0CE00 1 1 unit
• 6 male contacts, 2.5 mm2 5 3RK1902-0CC00 1 1 unit
 Motor plugs
Connector set for motor cable for connection to motors,
comprising a cable-end connector hood, straight
outgoing feeder, female insert for HAN 10e, incl. star
jumper, incl. gland
• 7 female contacts, 1.5 mm2 30 3RK1911-2BM21 1 1 set
• 7 female contacts, 2.5 mm2 30 3RK1911-2BM22 1 1 set
 Motor plugs with EMC suppressor circuit
Connector set for motor cable for connection to motors,
comprising a cable-end connector hood, straight
outgoing feeder, female insert for HAN 10e with
EMC suppressor circuit, incl. star jumper,
incl. gland
• 7 female contacts, 1.5 mm2 30 3RK1911-2BL21 1 1 set
• 7 female contacts, 2.5 mm2 30 3RK1911-2BL22 1 1 set

Smart Infrastructure, Industrial Control Catalog 2021 6/37

* You can order this quantity or a multiple thereof.

 Motor
Hybrid Starters
Motor Startersfor
Use in the Field, High Degree of Protection
ET 200pro Motor Starters
ET 200pro motor starter
Accessories
Accessories for ET 200pro motor starters

Version SD Article No. Price PU PS*

per PU (UNIT,
SET, M)
d
Motor cables (continued)
 Motor cables, assembled at one end
Open at one end, HAN Q8, angular, length 5 m
• For motor without brake, for ET 200pro, 4 x 1.5 mm2 15 3RK1911-0EB31 1 1 unit
• For motor with brake for ET 200pro, 6 x 1.5 mm2 30 3RK1911-0ED31 1 1 unit
• For motor without brake, with thermistor, for ET 200pro, 30 3RK1911-0EF31 1 1 unit
6 x 1.5 mm2
• For motor with brake and thermistor for ET 200pro, 30 3RK1911-0EG31 1 1 unit
8 x 1.5 mm2
Power bus
 Power T terminal connectors
For 400 V AC, for connection of feeders (e.g. motor
starters) by means of standard round cable at any point
of the power bus, by insulation displacement connection,
used with preassembled bus segments
• 2.5 mm2/4 mm2 5 3RK1911-2BF01 1 1 unit
• 4 mm2/6 mm2 5 3RK1911-2BF02 1 1 unit
 Power double-T terminal connectors
For 400 V AC, for connection of feeders (e.g. motor
starters) by means of standard round cable at any point
of the power bus, by insulation displacement connection,
used with preassembled bus segments,
connection of two motor starters possible
• 4 mm2/6 mm2 5 3RK1911-2BG02 1 1 unit
Sealing set (comprising 2 seals)
For power T/power double-T terminal connectors
• For power cables with Ø 10 ... 13 mm 5 3RK1911-5BA00 1 1 unit
• For power cables with Ø 13 ... 16 mm 5 3RK1911-5BA10 1 1 unit
• For power cables with Ø 16 ... 19 mm 5 3RK1911-5BA20 1 1 unit
• For power cables with Ø 19 ... 22 mm X 3RK1911-5BA30 1 1 unit
3RK1911-5BA50
6

• Blanking plugs 5 1 1 unit

Further accessories for power connections
Crimping tool 15 3RK1902-0CW00 1 1 unit
HYBRID MOTOR
STARTERS

for pins/sockets, 4 mm2 and 6 mm2

9

3RK1902-0CW00
Dismantling tools
• For male and female contacts for 9-pole 15 3RK1902-0AB00 1 1 unit
HAN Q4/2 inserts
• For male and female contacts for 9-pole 5 3RK1902-0AJ00 1 1 unit
HAN Q8 inserts
Sealing caps
For 9-pole power sockets
• 1 unit per pack 5 3RK1902-0CK00 1 1 unit
• 10 units per pack 5 3RK1902-0CJ00 1 10 units

3RK1902-0CK00

6/38 Smart Infrastructure, Industrial Control Catalog 2021

* You can order this quantity or a multiple thereof.

Hybrid Motor Starters Motor Starters for Use in the Field, High Degree of Protection
ET 200pro Motor Starters
ET 200pro motor starter
Accessories
Accessories for ET 200pro motor starters

Version SD Article No. Price PU PS*

per PU (UNIT,
SET, M)
d
Further accessories
Module racks, wide1)
• Length 500 mm 1 6ES7194-4GB00-0AA0 1 1 unit
• Length 1 000 mm 1 6ES7194-4GB60-0AA0 1 1 unit
• Length 2 000 mm 1 6ES7194-4GB20-0AA0 1 1 unit
Module racks, wide, compact1)
• Length 500 mm 1 6ES7194-4GD00-0AA0 1 1 unit
• Length 1 000 mm 1 6ES7194-4GD10-0AA0 1 1 unit
• Length 2 000 mm 1 6ES7194-4GD20-0AA0 1 1 unit
Backplane bus modules 110 mm2) 2 3RK1922-2BA00 1 1 unit
Backplane bus module for Safety local isolator 2 3RK1922-2BA01 1 1 unit
modules
Handheld devices 5 3RK1922-3BA00 1 1 unit
For ET 200pro motor starters (or for ET 200S High
Feature and M200D motor starters) for local operation.
Notes:
• The motor-starter-specific serial interface cables must
be ordered separately.
• The RS 232 interface cable 3RK1922-2BP00 is used for
the MS ET 200pro.
RS 232 interface cable 5 3RK1922-2BP00 1 1 unit
Serial data connection between ET 200pro (or M200D)
3RK1922-3BA00
motor starters and the RS 232 interface of a
PC/PG/laptop (with the Motor Starter ES software)
or the handheld device 3RK1922-3BA00.
USB interface cable, 2.5 m 3 6SL3555-0PA00-2AA0 1 1 unit
Serial data connection between ET 200pro (or M200D)
motor starters and the USB interface of a PC/PG/laptop
(with the Motor Starter ES software).
M12 sealing caps } 3RK1901-1KA00 100 10 units
For sealing unused M12 input or output sockets

6
(one set contains ten sealing caps)

3RK1901-1KA00

STARTERS
HYBRID MOTOR
Motor suppression module
RC element for installation in motor terminal box

9
• Angular design 15 3RK1911-6EA00 1 1 unit

3RK1911-6EA00
• Round design 15 3RK1911-6EB00 1 1 unit

3RK1911-6EB00
1)
The wide module rack can accommodate all ET 200pro motor starters and
any optional modules (isolator module, Safety local isolator module and
400 V disconnecting module).
2)
The backplane bus module is a prerequisite for operation of the
ET 200pro motor starter and the optional module.
For more
For more connection
connectiontechnology
technology products,
products, seesee
https://support.industry.siemens.com/cs/ww/en/view/65355810.
https://support.industry.siemens.com/cs/ww/en/view/65355810..

Smart Infrastructure, Industrial Control Catalog 2021 6/39

* You can order this quantity or a multiple thereof.

 Motor
Hybrid Starters
Motor Startersfor
Use in the Field, High Degree of Protection
ET 200pro Motor Starters
Motor starter ES
Software
Software
Motor Starter ES

■ Overview
More information
Industry Mall,
Industry Mall, see
see www.siemens.com/product?3ZS1
www.siemens.com/product?3ZS1
Technical
Technical specifications
specificationsand
andsystem
systemrequirements,
requirements,see
see
https://support.industry.siemens.com/cs/ww/en/ps/16713/td
https://support.industry.siemens.com/cs/ww/en/ps/16713/td

Motor Starter ES is used for the startup, parameterization,

diagnostics, documentation and preventive maintenance of
SIMATIC ET 200S, ET 200pro, ECOFAST and M200D motor
starters.
The software program is available in three versions which differ
in their user-friendliness, scope of functions and price.

Motor Starter ES for parameterization, monitoring, diagnostics and

testing of motor starters
6 STARTERS
HYBRID MOTOR
9

6/40 Smart Infrastructure, Industrial Control Catalog 2021

Hybrid Motor Starters
Motor Starters for Use in the Field, High Degree of Protection
SIRIUS M200D motor starters SIRIUS M200D Motor Starters
General data
General data

Overview
More information
Homepage, see
Homepage, see www.siemens.com/motorstarter
www.siemens.com/motorstarter
Industry
Industry Mall,
Mall, see
see www.siemens.com/product?M200D
www.siemens.com/product?M200D
TIA Selection
Selection Tool
Tool Cloud
Cloud (TST
(TST Cloud),
Cloud),see
see
https://www.siemens.com/tstcloud/?node=MS_M200D
https://www.siemens.com/tstcloud/?node=MS_M200D

Basic functionality
The versions of the M200D motor starter are equipped with the
following properties and functions:
• Available as direct-on-line and reversing starters in a rugged
design
• Electromechanical or electronic switching version
• Low variance – only two device versions up to 7.5 HP thanks
to wide range setting
• All versions have the same enclosure size.
• Degree of protection IP65
SIRIUS M200D AS-i Basic motor starter with manual local operation • Quick and fail-safe wiring of system and motor cables using
The intelligent and highly flexible SIRIUS M200D motor starters ISO 23570 plug-in connector technology (Q4/2 and Q8/0)
for distributed installation start, monitor and protect motors and • Robust and widely used M12 connection method for digital
loads up to 7.5 HP. inputs and outputs
The M200D motor starters are available in four versions: • Integrated feeder connector monitoring
• Full motor protection through overload protection and a
M200D M200D M200D M200D temperature sensor (PTC, TC)
AS-i Basic AS-i Standard PROFIBUS PROFINET
• Short-circuit and overload protection integrated
Motor control with
• Integrated repair switch lockable with three locks
AS-i communication PROFIBUS PROFINET (multi-level service)
Mechanical or electronic switching • Uniform wiring to the SINAMICS G110D, SINAMICS G110M

6
and SINAMICS G120D frequency inverters and to the
Electronic switching with soft starter functionality ET 200pro distributed I/O system

STARTERS
HYBRID MOTOR
-- • Extensive diagnostics concept using LEDs
• Optional integrated manual local control with key-operated

9
Function available
switch (ordering option)
-- Function not available
• Optionally available brake actuation with voltages from
180 V DC (no rectifier needed in motor) or 230/400 V AC
(ordering options)
Article No. scheme

Product versions Article number

Motor starters 3RK13 @ 5 – 6 @ S @ 1 – @ A @ @
Type AS-i Basic 1 A
AS-i Standard 2 A
PROFIBUS/PROFINET 9 D
Setting range for rated 0.15 ... 2 A K
operational current I A 1.5 ... 9 A N
1.5 ... 12 A L
Starter version Electromechanical starters 4 with integrated contactor
Electronic starters 7 with thyristors
Product function Direct-on-line starters 0
Reversing starters 1
Direct-on-line starters 2 with manual local operation
Reversing starters 3 with manual local operation
Brake actuation None 0
230/400 V AC 3
180 V DC 5
Example 3RK13 1 5 – 6 K S 4 1 – 3 A A 0

Note:
The Article No. scheme shows an overview of product versions For your orders, please use the article numbers quoted in the
for better understanding of the logic behind the article numbers. selection and ordering data.

Smart Infrastructure, Industrial Control Catalog 2021 6/41

 Hybrid Motor Starters
Motor Starters for Use in the Field, High Degree of Protection
SIRIUS M200D motor starters
SIRIUS M200D Motor Starters
General data
General data

■ Benefits
M200D motor starters provide the following advantages for • Comprehensive offering of accessories, including
customers: ready-assembled cables
• High plant availability through plug-in capability of the main • The M200D motor starters can be installed with a few manual
circuit, communication and I/Os – relevant for installing and steps. The integrated plug-in technology enables far lower
replacing devices wiring outlay:
• Cabinet-free construction and near-motor installation thanks Preassembled cables can be plugged directly onto the motor
to the high degree of protection IP65 starter module.
• The motor starters record the actual current flow for the • Easy and user-friendly installation because all versions have
parameterizable electronic motor overload protection. the same enclosure dimensions.
Reliable messages concerning the overshooting or • Fast and user-friendly commissioning using optional manual
undershooting of setpoint values ensure comprehensive local operation
motor protection. All motor protection functions can be • Increase of process speed through integrated functions such
defined by simple parameterization as "Quick Stop" and "Disable Quick Stop", e.g. at points and
• Low stock levels and low order costs thanks to a wide setting crossings
range for the electronic motor protection of 1:10 • Optional manual local control with momentary-contact and
(only two device versions up to 7.5 HP) latching operation for easier startup and easier servicing
• The integrated wide range for the current enables a single
device to cover numerous standard motors of different sizes.

■ Application
The high degree of protection IP65 makes the M200D motor Use of SIRIUS M200D motor starters in conjunction with
starters suitable in particular for use on extensive conveying IE3/IE4 motors
systems such as are found in mail sorting centers, airports,
automotive factories and the packing industry. Note:
For the
the use
use of
ofSIRIUS
SIRIUSM200D
M200Dmotor
motorstarters in in
starters conjunction withwith
conjunction
For simple drive tasks, particularly in conveyor applications, the
new SINAMICS G110D frequency inverter series with a perform- highly energy-efficient
highly energy-efficient IE3/IE4
IE3/IE4 motors,
motors, please
please observe
observe the the
ance range from 0.75 kW to 7.5 kW and degree of protection information ondimensioning
information on dimensioning and
and configuring,
configuring, seesee Application
Application
IP65 is the ideal partner for the M200D motor starters. Manual.
Manual..

SINAMICS G110D converters allow for stepless speed control of

6

three-phase asynchronous motors and comply with the require-

ments for materials handling applications with frequency control.
HYBRID MOTOR
STARTERS

For simple drive tasks in conveyor applications in which a

9

frequency inverter integrated into the motor is required, the

SINAMICS G110M frequency inverter with a performance range
from 0.37 kW to 4 kW and degree of protection IP65/66 is the
ideal partner. The SINAMICS G110M is available individually as
a frequency converter for self-assembly and pre-mounted on
SIMOGEAR geared motors, and with its conveyor-specific
functions it satisfies the requirements of conveyor technology
applications.

6/42 Smart Infrastructure, Industrial Control Catalog 2021

Hybrid Motor Starters Motor Starters for Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
SIRIUS M200D motor starters M200D Motor Starters for AS-Interface
General data
General data

Overview
motor control
For motor controlusing
usingAS-Interface
AS-Interface there
there areare
thethe following
following Mounting and installation
M200D motor
M200D motor starter
starterversions:
versions:SIRIUS
SIRIUS M200D
M200D AS-iAS-i Basic
Basic andand
SIRIUS M200D
M200DAS-i
AS-iStandard
Standard(basic
(basicfunctionality,
functionality, see page 9/21 The M200D motor starters can be installed with a few manual
SIRIUS see page 16/41 steps. The integrated plug-in technology enables far lower wir-
"SIRIUS M200D
“SIRIUS M200D Motor Starters” "General
MotorStarters" “Generaldata"
data” "Overview").
“Overview”). ing outlay. Connecting cables can be plugged directly onto the
SIRIUS M200D AS-i Basic motor starter module. Swapping of the connecting wires and
malfunctions within the plant are prevented by preassembled
Functionality cables. The AS-i bus is connected cost-effectively using an M12
• Easy and fast on-site startup through parameterization of local connection on the device. All versions have identical enclosure
setting knobs (DIP switches) and rotary coding switches for dimensions for easier system design and conversion.
adjusting the rated operational current. The rotary coding
switch has an OFF position for deactivating the overload Parameterization and configuration
protection with the help of the thermal motor model when The particularly robust M200D AS-i Standard motor starter is
using a temperature sensor. characterized by numerous functions which can be flexibly
Communications parameterized. It enables highly flexible parameterization
through the AS-i bus using data records from the user program
• AS-i communication with A/B addressing according to as well as user-friendly local parameterization using the
Spec V2.1 Motor Starter ES startup software through the local point-to-
• The AS-i bus is connected cost-effectively using an point interface.
M12 connection on the device. Of the four digital inputs, Functions can be flexibly assigned to the digital inputs and
two are contained in the process image and can therefore be outputs, adapting them to all possible conveyor applications.
used in the PLC program. The other two inputs are locally All motor protection functions, limit values and reactions can be
effective and permanently assigned with functions. defined by parameterization. The AS-i Standard is unique. In its
• The LEDs can provide comprehensive diagnostics of the 6E/4A process image the motor starter sends all four digital
device on the spot. In addition to diagnostics using the inputs and the digital output via the process image to the PLC in
PAE process image, the device can create up to 15 different cyclic mode. System configuration and system documentation
diagnostic signals per slave. The message with the highest are facilitated not least by a number of CAX data.
priority can be read out through the AS-i communication. This
is yet another new development which distinguishes the Operation
M200D AS-i Basic motor starter from the rest of the market and The new generation of motor starters is characterized by its
adds innovative technology, maximum availability and advanced functionality, maximum flexibility and extremely high
transparency to the system. degree of automation.

6
SIRIUS M200D AS-i Standard All digital inputs and outputs exist in the cyclic process image.
The intelligent and highly flexible M200D AS-i Standard motor All limit values for monitoring functions and their reactions are

STARTERS
HYBRID MOTOR
starter in A/B technology starts and protects motors and loads parameterizable and therefore adaptable to the application. The
up to 5.5 kW. They are available in direct-on-line or reversing motor starters record the actual current flow. Evaluating the

9
starter versions, in a mechanical version and also an electronic current of the parameterizable solid-state overload protection
version (the latter with soft start function). increases the availability of the drives, as do reliable messages
concerning the overshooting or undershooting of setpoint
The M200D AS-i Standard motor starter is the most functional values.
member of the SIRIUS motor starter family in the high degree of
protection IP65 for AS-i communication. Consistency with other Diagnostics and maintenance
products of the SIRIUS M200D motor starter range and with the
frequency converter and ET 200pro I/O system is assured. The M200D sets new standards for diagnostics. In addition to
diagnostics using the PAE process image and diagnostics by
Functionality "parameter echo" (up to 15 different diagnostic signals per slave
• AS-i communication with A/B addressing according to can be read out via AS-i communication), the possibility of
Spec 3.0 reading out diagnostic data records is unique on the market.
• Electronic version also with soft start function The AS-i Standard is recommended in particular for expansive
• AS-i slave profile 7AE/7A5 with process image 6E/4A and highly automated system components because the possi-
• Full TIA integration: All digital inputs and outputs exist in the bility of monitoring devices and systems with data records
cyclic process image and are visible through AS-i, providing (statistical data, measured values and device diagnostics)
maximum flexibility and best adaptability to the application. provides an in-depth view of the plant from the control room,
guaranteeing the monitoring process and increasing plant
• Additionally expanded diagnostics using data record through availability.
AS-i bus
• Complete plant monitoring using statistics data record and Preventive maintenance can be carried out with the integrated
current value monitoring by means of data records maintenance timer and plant downtimes prevented as a result in
advance.
• Parameterization through AS-i bus with the help of data
records or an expanded process image from the user program Local control of a drive is possible using the ordering option with
• Control of the motor starter using a command data record from integrated manual operation. This is yet another new develop-
the user program ment which distinguishes the M200D AS-i Standard motor starter
from the rest of the market and adds innovative technology,
• Flexible assignment of the digital inputs and outputs with all maximum availability and transparency to the plant.
available assignable input actions
• Parameterization using Motor Starter ES at the local interface
(ordering option for startup software)
• Diagnostics with the help of Motor Starter ES (ordering option
for startup software)

Smart Infrastructure, Industrial Control Catalog 2021 6/43

Siemens IC 10 · 2020
 Motor
Hybrid Starters
Motor Startersfor
Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
SIRIUS M200D motor starters for AS-Interface
M200D Motor Starters for AS-Interface
General data
General data

SIRIUS M200D SIRIUS M200D

AS-i Basic AS-i Standard
Device functions (firmware features)
Slave on the bus
Fieldbus AS-i
Slave type A/B acc. to Spec 2.1 A/B acc. to Spec 3.0
Profile 7.A.E 7.A.E & 7.A.5
Number of assigned AS-i addresses on the bus 1 2
Number of stations per AS-i master Max. 62 devices Max. 31 devices
AS-i master profile M3 and higher M4 and higher
Parameter assignment
DIP switches --
Potentiometer for rated operational current --
Motor Starter ES --
Data records through AS-i --
Diagnostics
Diagnostics through parameter channel
Acyclic through data records --
Expanded process image PAE 4 bytes --
Process image
Process image 4E/3A 6E/4A
6

Data channels
Local optical interface (manual local)
HYBRID MOTOR
STARTERS

AS-i bus
9

Motor Starter ES through local interface --

Motor Starter ES through bus --
Data records1) (acyclic)
Parameter assignment --
Diagnostics --
Measured values --
Statistics --
Commands --
Inputs
Number 4
• Of these in the process image 2 through AS-i 4 through AS-i
Input action For permanently assigned functions, see manual Parameterizable: flexible
Quick stop Permanent function: latching, edge-triggered Parameterizable function: latching (edge-
triggered), non-latching (level-triggered)
Outputs
Number 1
Output action Permanent function: assigned with group fault Parameterizable: For function, see manual
Brake output
180 V DC / 230/400 V AC / none
Motor protection
Overload protection Electronic, wide range 1:10
Short-circuit protection
Full motor protection
Temperature sensor Parameterizable using DIP switches: Parameterizable via Motor Starter ES, data
PTC or Thermoclick or deactivated record: PTC or Thermoclick or deactivated
Function available
-- Function not available
1)
The data records are a reduced selection compared with
PROFIBUS/PROFINET.

6/44 Smart Infrastructure, Industrial Control Catalog 2021

 Hybrid Motor Starters Motor Starters for Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
SIRIUS M200D motor starters for AS-Interface M200D Motor Starters for AS-Interface
General data
General data

SIRIUS M200D SIRIUS M200D

AS-i Basic AS-i Standard
Device functions (firmware features) (continued)
Device function
Repair switch ✓
Current limit monitoring bottom -- ✓ Parameterizable
Current limit monitoring top -- ✓ Parameterizable
Zero current detection ✓ Permanent function: disconnection, less than ✓ Parameterizable
18.75% of the rated operational current Ie
Blocking current ✓ Permanent function: starting up of the motor: ✓ Parameterizable
Tripping limit up to 800% of the rated operational
current Ie for 10 s
Active operation: Threshold for tripping "blocking
current" up to 400% of the rated operational
current Ie
Asymmetry ✓ Permanent function: up to 30% of the rated ✓ Parameterizable
operational current Ie (only mechanical MS)
Load type ✓ Permanent function: Three-phase ✓ Parameterizable: single-phase and three-phase
Shutdown class ✓ Parameterizable using DIP switches: Parameterizable via Motor Starter ES, data
CLASS 10/deactivated record: CLASS 5, 10, 15, 20
Protection against voltage failure ✓ ✓ Parameterizable: activated/deactivated
Soft starter control function
Soft start function -- ✓ Only solid-state version

6
Bypass function -- ✓ Only solid-state version

STARTERS
HYBRID MOTOR
✓ Function available

9
-- Function not available

■ Application
The M200D AS-i standard is particularly suitable for highly auto- Use of M200D motor starters in conjunction with
mated applications in conveyor systems requiring devices and IE3/IE4 motors
systems to be monitored to prevent or limit plant downtime.
The option of planning the functions of the motor starter or its Note:
interfaces also creates the prerequisite for fine-adjustment to the For the use
use of
of SIRIUS
SIRIUSM200D
M200Dmotor
motorstarters
startersininconjunction with
conjunction with
function of the motor starter in the application and hence highly energy-efficient
highly energy-efficientIE3/IE4
IE3/IE4motors,
motors,please
please observe
observethethe
provides for extreme flexibility. information on dimensioning
information on dimensioningand andconfiguring,;
configuring,see see Application
Application
Manual.

■ Technical specifications
More information
Manuals for SIRIUS
SIRIUS M200D:
M200D: Notes
Notes on
on security:
security:
•• AS-i
AS-i Basic,
Basic, see
see In order
In order toto protect
protect plants,
plants, systems,
systems, machines
machines and
and networks
networks against
against cyber
cyber
https://support.industry.siemens.com/cs/ww/en/view/35016496
https://support.industry.siemens.com/cs/ww/en/view/35016496 threats, itit is
threats, is necessary
necessary to implement –– and
to implement and continuously
continuously maintain
maintain –– aa holistic,
holistic,
state-of-the-artindustrial
state-of-the-art industrial security
security concept.
concept. Siemens products and and solutions
solutions
•• AS-i
AS-i Standard,
Standard, see
see
represent only one component of such a concept.
represent concept.
https://support.industry.siemens.com/cs/ww/en/view/38722160
https://support.industry.siemens.com/cs/ww/en/view/38722160
For more
For more information
information onon the
the subject
subject of
of Industrial
Industrial Security,
Security, see
see
FAQs, see https://support.industry.siemens.com/cs/ww/en/ps/16324/faq
https://support.industry.siemens.com/cs/ww/en/ps/16324/faq www.siemens.com/industrialsecurity.
www.siemens.com/industrialsecurity.

Smart Infrastructure, Industrial Control Catalog 2021 6/45

 Motor
Hybrid Starters
Motor Startersfor
Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
SIRIUS M200D motor starters for AS-Interface
M200D Motor Starters for AS-Interface
General data
General data

Type M200D motor starters

AS-i Basic AS-i Basic AS-i Standard AS-i Standard
electromechanical electronic electromechanical electronic
switching switching switching switching
Technology designation1) DSte/RSte sDSte/sRSte DSte/RSte sDSSte/sRSSte
Mechanics and environment
Mounting dimensions (W x H x D) mm 294 x 215 x 159
Permissible ambient temperature
• During operation °C -25 ... +55
• During storage °C -40 ... +70
Weight g 2 880/3 130 3 220/3 420 2 880/3 130 3 220/3 420
Permissible mounting position Vertical, horizontal, lying
Vibration resistance acc. to IEC 60068 Part 2-6 g 2
Shock resistance
• Acc. to IEC 60068 Part 2-27 g/ms 12/11 half-sine
• Without influencing the contact position g/ms 9.8/5 or 5.9/10
Degree of protection acc. to IEC 529 IP65
Installation altitude
• Up to 1 000 m No derating
• Up to 2 000 m 1% per 100 m
Cooling Convection
Protection class IEC 536 (VDE 0106-1) 1
Electrical specifications
Control circuit
Operating voltage UAs-i V DC 26.5 ... 31.6
Supply voltage Uaux V DC 20.4 ... 28.8
Power consumption from AS-i (incl. 200 mA sensor supply) mA < 300
Current consumption from Uaux (without digital output)
• Max. mA 155 15 (direct-on-line)/ 155 15 (direct-on-line)/
175 (reversing) 175 (reversing)
• Typ. mA 75 10 (direct-on-line)/ 75 10 (direct-on-line)/
75 (reversing) 75 (reversing)
6

Main circuit
Maximum power of three-phase motors at 400 V AC kW 5.5 4 5.5 5.5
HYBRID MOTOR
STARTERS

Rated operational voltage Ue

• Approval acc. to EN 60947-1 V AC 400 (50/60 Hz)
9

• Approval acc. to UL and CSA V AC 600 (50/60 Hz) 480 (50/60 Hz) 600 (50/60 Hz) 480 (50/60 Hz)
• Rated operational current range A 0.15 ... 2/1.5 ... 12 -- 0.15 ... 2/1.5 ... 12 --
• Rated operational current range for soft starting A -- 0.15 ... 2/1.5 ... 12
• Rated operational current range for direct-on-line starting A -- 0.15 ... 2/1.5 ... 9 -- 0.15 ... 2/1.5 ... 9
Rated operational current for starters Ie at 400 V AC
• 400 V at AC-1/2/3 A 12 -- 12 --
• 500 V at AC-1/2/3 A 9 -- 9 --
• 400 V at AC-4 A 4 -- 4 --
• 400 V at AC-53a A -- 9 -- 12 for soft starting
9 for direct-on-line
starting
Mechanical endurance of contactor Operating cycles 30 million -- 30 million --
Trip class CLASS 10 CLASS 5, 10, 15, 20
Type of coordination acc. to IEC 60947-4-1 1 (2 for device 1 1 (2 for device 1
version 2A) version 2A)
Permissible switching frequency see manual see manual
Rated ultimate short-circuit breaking capacity Iq
• At 400 V AC kA 50
• At 500 V AC kA 502) 202) 50 202)
Short-circuit protection
• At Iemax = 2 A Integrated, 2 x13 Ie = 26 A
• At Iemax = 9/12 A Integrated, 2 x13 Ie = 208 A
Brake actuation (option)
Operational voltage V 230/400 AC or 180 DC
Uninterrupted current A < 0.5 at 230/400 V AC
< 0.8 at 180 V DC
Short-circuit protection Yes, 1 A melting fuse
1) 2) Only systems with grounded neutral point permitted.
DS .... Direct-on-line starters
RS .... Reversing starters
DSS .. Direct-on-line soft starters
RSS .. Reversing soft starters
te ...... Full motor protection (thermal + electronic)
s ....... Electronic switching with semiconductor.

6/46 Smart Infrastructure, Industrial Control Catalog 2021

 Hybrid Motor Starters Motor Starters for Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
SIRIUS M200D motor starters for AS-Interface M200D Motor Starters for AS-Interface
Basic motor starter IE3/IE4 ready
M200D Basic motor starters

■ Selection and ordering data

M200D AS-i Basic without manual local operation M200D AS-i Basic with manual local operation

Version SD Article No. Price PU PS*

per PU (UNIT,
SET, M)
d
Electromechanical starters (with integrated contactor)
15 3RK1315-6@S41-@AA@ 1 1 unit
Rated operational current setting range/A Additional price
• 0.15 ... 2 K None
• 1.5 ... 12 L ✓
Direct-on-line starters/reversing starters
• Direct-on-line starters 0 None
• Reversing starters 1 ✓
• Direct-on-line starters with manual local operation 2 ✓
• Reversing starters with manual local operation 3 ✓
Brake actuation
• Without brake actuation 0 None
• Brake actuation (230/400 V AC) 3 ✓

6
• Brake actuation (180 V DC) 5 ✓
Electronic starters (with thyristors)

STARTERS
HYBRID MOTOR
15 3RK1315-6@S71-@AA@ 1 1 unit
Rated operational current setting range/A Additional price

9
• 0.15 ... 2 K None
• 1.5 ... 9 N ✓
Direct-on-line starters/reversing starters
• Direct-on-line starters 0 None
• Reversing starters 1 ✓
• Direct-on-line starters with manual local operation 2 ✓
• Reversing starters with manual local operation 3 ✓
Brake actuation
• Without brake actuation 0 None
• Brake actuation (230/400 V AC) 3 ✓
• Brake actuation (180 V DC) 5 ✓
✓ = Additional price

Smart Infrastructure, Industrial Control Catalog 2021 6/47

* You can order this quantity or a multiple thereof.

 Motor
Hybrid Starters
Motor Startersfor
Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
SIRIUS M200D motor starters for AS-Interface
M200D Motor Starters for AS-Interface
Standard motor starter IE3/IE4 ready
M200D Standard motor starters

■ Selection and ordering data

M200D AS-i Standard without manual local operation M200D AS-i Standard with manual local operation

Version SD Article No. Price PU PS*

per PU (UNIT,
SET, M)
d
Electromechanical starters (with integrated contactor)
15 3RK1325-6@S41-@AA@ 1 1 unit
Rated operational current setting range/A Additional price
• 0.15 ... 2 K None
• 1.5 ... 12 L ✓
Direct-on-line starters/reversing starters
• Direct-on-line starters 0 None
• Reversing starters 1 ✓
• Direct-on-line starters with manual local operation 2 ✓
• Reversing starters with manual local operation 3 ✓
Brake actuation
• Without brake actuation 0 None
6

• Brake actuation (230/400 V AC) 3 ✓

• Brake actuation (180 V DC) 5 ✓
HYBRID MOTOR
STARTERS

Electronic starters (with thyristors)

15 3RK1325-6@S71-@AA@ 1 1 unit
9

Rated operational current setting range/A Additional price

• 0.15 ... 2 K None
• 1.5 ... 12 L ✓
Direct-on-line starters/reversing starters
• Direct-on-line starters 0 None
• Reversing starters 1 ✓
• Direct-on-line starters with manual local operation 2 ✓
• Reversing starters with manual local operation 3 ✓
Brake actuation
• Without brake actuation 0 None
• Brake actuation (230/400 V AC) 3 ✓
• Brake actuation (180 V DC) 5 ✓
✓ = Additional price

6/48 Smart Infrastructure, Industrial Control Catalog 2021

* You can order this quantity or a multiple thereof.

Hybrid Motor Starters Motor Starters for Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
SIRIUS M200D motor starters for PROFIBUS/PROFINET
M200D Motor Starters for PROFIBUS/PROFINET
General data
General data

Overview
The intelligent, highly flexible M200D PROFIBUS/PROFINET
motor starters are the most functional motor starters of the
SIRIUS motor starter family in the high degree of protection IP65
for PROFIBUS/PROFINET communication.
They start and protect motors and loads up to 7.5 HP.
Direct-on-line and reversing starter versions are available, in a
mechanical version and also an electronic version (the latter with
soft start function).
The particularly robust M200D PROFIBUS/PROFINET motor
starters are characterized by numerous functions which can be
flexibly parameterized. Their modular design comprises a motor
starter module and a communication module.
The M200D PROFINET motor starters enable TIA-integrated
parameterization through PROFINET from STEP 7 – in familiar,
user-friendly manner with the look and feel of PROFIBUS.
Functionality
• For basic
basicfunctionality,
functionality,see
seepage
page 9/21“SIRIUS
16/41 "SIRIUSM200D
M200DMotorMotor
Starters” "General
Starters" “General data"
data” "Overview"
“Overview” M200D motor starter module for PROFIBUS/PROFINET
• Electronic version also with soft start function (without communication module)
• Robust and widely used M12 connection method for the
digital inputs and outputs and the PROFIBUS/PROFINET bus
connection
• All four digital inputs and two digital outputs exist in the cyclic
process image. This provides complete transparency of the
process on the control level
• Full TIA integration: All digital inputs and outputs exist in the
cyclic process image and are visible through the bus,
providing maximum flexibility and excellent adaptability to the
application

6
• Flexible assignment of the digital inputs and outputs with all
available assignable input actions

STARTERS
HYBRID MOTOR
• Extensive diagnostics concept using LEDs and through the

9
bus with the TIA-compatible mechanisms
• Expanded diagnostics using data records
• Complete plant monitoring using statistics data record and
current value monitoring by means of data records
• Parameterization through PROFIBUS/PROFINET bus with the M200D communication module for PROFIBUS
help of data records from the user program
• Control of the motor starter using a command data record from
the user program
• Removable modular control unit – quicker device replacement
and therefore lower costs when device outages occur – since
existing wiring is on the control unit and only one device needs
to be replaced
• Parameterization in STEP 7 HW Config using Motor Starter ES
(ordering option for startup software)
• Startup and diagnostics with the help of Motor Starter ES
(ordering option for startup software)
• Trace function through Motor Starter ES for optimized startup
and tracking of process and device values
Only with PROFINET:
• Just one bus system from the MES level to the devices – no
routers
• More stations on the bus and possible configuration of flexible
bus structures M200D communication module for PROFINET
• Automatic re-parameterization in case of device replacement
thanks to proximity detection
• Wireless integration of plant segments in difficult
environments using WLAN
• Easier expansion of the system thanks to a higher number of
stations on the bus and elimination of terminating resistors

Smart Infrastructure, Industrial Control Catalog 2021 6/49

 Motor
Hybrid Starters
Motor Startersfor
Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
SIRIUS M200D motor starters for PROFIBUS/PROFINET
M200D Motor Starters for PROFIBUS/PROFINET
General data
General data
Mounting and installation The motor starter is TIA-diagnostics compatible, which means
that when a fault is identified, a diagnostics alarm is distributed,
The M200D PROFIBUS/PROFINET motor starter is comprised of which invokes the diagnostics OB in the case of a SIMATIC
the communication module and the motor starter module. Only control. The fault can be evaluated as usual in the user program.
the motor starter module has to be replaced therefore when
replacing devices. This saves time and money. The communica- The M200D motor starter offers a large variety of diagnostics
tion module remains as an active station on the bus and all other data through data records. Its functionality is without equal on
system components continue running. This prevents downtimes. the market. There are extensive options for reading out data from
the motor starter for monitoring devices, systems or processes.
The integrated plug-in technology enables far lower wiring
outlay: Connecting cables can be plugged directly onto the The motor starter is equipped internally with three logbooks for
motor starter module. The PROFINET bus is connected cost- device faults, motor starter trips and events that are issued with
effectively using an M12 connection on the device. All versions a time stamp. These logbooks can be read out of the motor
have identical enclosure dimensions for easier system design starter at any time in the form of data records and provide the
and conversion. plant operator with plenty of information about the state of his
plant and process which he can use to carry out improvements.
Parameterization and configuration
With the slave pointer and statistical data functions it is possible
All motor protection functions, limit values and reactions can be to read out, for example, the maximum internal current values or
defined by parameterization. the number of motor starter connection operations for plant
The user has several user-friendly options for the parameteriza- monitoring purposes. This allows deviations in the process to be
tion. In addition to parameterization directly from STEP 7, which monitored, but also optimum initial commissioning to take place.
also permits automatic re-parameterization in case of device re- The user can draw conclusions about the actual load conditions
placement, it is possible to use the user-friendly Motor Starter ES of the devices in his process and on this basis can optimize his
startup software. By connecting a programming device directly plant maintenance intervals.
to PROFIBUS/PROFINET and the Motor Starter ES startup The device diagnostics data record contains details of all the
software, the devices can also be conveniently programmed states of the motor starter, the device configuration and the
from a central point through the bus. Also, parameters can be communication status as a basis for central device and plant
changed during operation from the user program using the data monitoring.
record mechanism so that the function of the motor starter is
adapted to the process when required. With the help of a PC and With installation and maintenance functions (I&M), information
the Motor Starter ES software it is also possible to perform the on modules employed and data specified by the user during
parameterization through the local point-to-point interface configuration, such as location designations, are stored in the
on-site. motor starter. I&M functions are used for troubleshooting faults
and localizing changes in hardware in a plant or checking the
Functions can be flexibly assigned to the digital inputs and system configuration. Reordering a device is particularly easy as
6

outputs, adapting them to all possible conveyor applications. the result.

All digital inputs and outputs exist in the cyclic process image.
All limit values for monitoring functions and their reactions are The integrated maintenance timer can be used to implement
HYBRID MOTOR
STARTERS

parameterizable and therefore adaptable to the application. preventative maintenance and avoid plant downtimes through
Consistency with other products of the SIRIUS M200D motor look-ahead servicing.
9

starter range and with the frequency converter and ET 200pro

I/O system is assured. Another new addition is the TRACE integrated into the Motor
Starter ES software. It can be used to record measured values
Only with M200D PROFINET motor starters as a function of time following a trigger event. This enables pro-
cess flows to be recorded and their timing optimized.
Thanks to the integrated proximity detection, the device name
does not need to be issued manually when a device is replaced. Local control of a drive is possible using the ordering option with
The name is issued automatically by the neighboring devices integrated manual operation. This is yet another new develop-
which note the "names" of the devices in their proximity. ment which distinguishes the M200D PROFIBUS/PROFINET
No additional startup measures are required therefore when motor starter from the rest of the market and adds innovative
replacing a device. technology, maximum availability and transparency to the
system.
The new motor starter generation is characterized by high
functionality, maximum flexibility and the highest level of automa- M200D PROFINET motor starters with PROFIenergy
tion. PROFINET is especially recommended for large-scale and
highly automated system components, since the possibility of Increasing energy prices, far-reaching ecological problems
monitoring the devices or plants with data records (statistical worldwide and the threat of climate change make it necessary
data, measured values and device diagnostics) ensures a for you to be more conscious about your use of energy.
broader insight into the plant by the control room, and hence Active and effective energy management is possible with
increases the availability of the plant sustainably. PROFIenergy.
Operation PROFIenergy is a manufacturer-independent profile on
The motor starters record the actual current flow. Evaluating the PROFINET, which can be used by all manufacturers, has been
current of the parameterizable solid-state overload protection standardized by PNO1) and supports switching off electrical
increases the availability of the drives, as do reliable signals devices during dead times and measuring the energy flow.
1)
concerning the overshooting or undershooting of setpoint In the PNO (PROFIBUS Nutzerorganisation e. V. – PROFIBUS User
Organization), manufacturers and users have come together to agree on
values. the PROFIBUS and PROFINET standardized communication technologies.
Diagnostics and maintenance
Diagnostics is provided through numerous mechanisms – and
can be used as the customer prefers.

6/50 Smart Infrastructure, Industrial Control Catalog 2021

Hybrid Motor Starters Motor Starters for Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
SIRIUS M200D motor starters for PROFIBUS/PROFINET
M200D Motor Starters for PROFIBUS/PROFINET
General data
General data
Switching off during dead times PROFIenergy enables consumption data to be read off from the
devices in a unified form. This is recorded during operation and
PROFIenergy supports the targeted switching-off of loads can be displayed on a control panel, for example, or sent to
during dead time. overlying energy management software packages. This ensures
These can be planned short breaks of a few minutes (such as that the measured variables are in a uniform manufacturer-inde-
lunch breaks), longer dead times (such as nights) or unplanned pendent form and structure that is available to the user for further
dead times. Energy is always saved when no power is required. processing. These PROFIenergy functions thus provide the
basis for active load and energy management during operation.
Measuring and visualizing the energy flow as a basis of
energy management PROFIenergy in the M200D PROFINET motor starter
The objective of energy management is to optimize the use of The M200D PROFINET motor starter supports the "switching
energy in a company – from the purchasing of energy through to during dead times" and "current measurement values" functions
the consumption of energy – economically and ecologically. of the motor current using PROFIenergy. These are called
commands, because they trigger a reaction in the M200D motor
Analyses of energy consumption over time can be used to starter.
control energy flows, avoid energy peaks, improve ratings and
thus save costs.

SIRIUS M200D SIRIUS M200D

PROFIBUS PROFINET
Device functions (firmware features)
Slave on the bus
Fieldbus PROFIBUS to M12 PROFINET to M12
Adjustable number of stations 1 ... 125 1 ... 128 with CPU 315, CPU 317

6
1 ... 1 256 with CPU 319
Parameter assignment

STARTERS
HYBRID MOTOR
DIP switches For address setting and terminating resistor --
Motor Starter ES Through bus, optical interface

9
PROFIBUS/PROFINET data records
From STEP 7/HW Config
Diagnostics
Acyclic through data records
Diagnostic interrupt support
Process image
Process image 2 bytes PAE/2 bytes PAA
Data channels
Local optical interface (manual local)
Motor Starter ES through local interface
Using Motor Starter ES through bus
Data records (acyclic)
Parameter assignment Using DS 131 (DS = data record)
Diagnostics Device-specific DS 92
Measured values Measured values DS 94
Statistics Statistical data DS 95
Commands Using DS 93
Slave pointer Slave pointer DS 96
Logbook Using Motor Starter ES and data records: device faults DS 72, tripping operation DS 73, events DS 75
Device identification Using DS 100
I&M data Using DS 231 ... 234 Using data records 0xAFF0 ... 0xAFF3
Inputs
Number 4
• Of these in the process image 4
Input action Parameterizable: For flexibly assignable action, see manual
Quick stop Parameterizable: latching, non-latching
Function available
-- Function not available

Smart Infrastructure, Industrial Control Catalog 2021 6/51

 Motor
Hybrid Starters
Motor Startersfor
Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
SIRIUS M200D motor starters for PROFIBUS/PROFINET
M200D Motor Starters for PROFIBUS/PROFINET
General data
General data

SIRIUS M200D SIRIUS M200D

PROFIBUS PROFINET
Device functions (firmware features) (continued)
Outputs
Number 2
• Of these in the process image 2
Output action Parameterizable: For flexibly assignable action, see manual

Brake output
180 V DC / 230/400 V AC / none
Motor protection
Overload protection Electronic, wide range 1:10
Short-circuit protection
Full motor protection
Temperature sensor Parameterizable via Motor Starter ES, data record: PTC or Thermoclick or deactivated
Device function
Repair switch
Current limit monitoring bottom Parameterizable
Current limit monitoring top Parameterizable
Zero current detection Parameterizable: tripping, warning
Blocking current Parameterizable
6

Asymmetry Parameterizable
Load type Parameterizable: single-phase and three-phase
HYBRID MOTOR
STARTERS

Shutdown class Parameterizable via Motor Starter ES, data record: CLASS 5, 10, 15, 20
9

Protection against voltage failure Parameterizable: activated/deactivated

Support for PROFIenergy profile
Switching during dead times -- 3
Measured motor current values -- 3
Soft starter control function
Soft start function
Bypass function Only solid-state version

Function available
-- Function not available

Benefits
M200D PROFINET motor starters with PROFIenergy
Both standards and laws are making environmental protection It is thus an objective within the industry to save energy and
and energy management increasingly important, as is the desire actively reduce CO2 emissions. By the careful use of valuable
to cut energy costs in production facilities and thus ensure a resources, the manufacturer-independent PROFIenergy profile
sustainable competitive advantage. on PROFINET can make an active contribution to environmental
protection.

Application
M200D PROFIBUS/PROFINET motor starters are particularly Adaptability of the motor starter functions and maximum
suitable for fully TIA-integrated, highly automated conveyor flexibility of the device enable a broad range of application
applications that meet all needs with regard to the monitoring of without any limits. The PROFINET-specific expansions are the
devices and systems and preventive maintenance. best assurance of a future-proof investment.

6/52 Smart Infrastructure, Industrial Control Catalog 2021

Hybrid Motor Starters Motor Starters for Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
SIRIUS M200D motor starters for PROFIBUS/PROFINET
M200D Motor Starters for PROFIBUS/PROFINET
General data
General data

Technical specifications
More information
Equipment Manual
Manual for
for M200D
M200D PROFIBUS/PROFINET,
PROFIBUS/PROFINET, see Notes
Notes on
on security:
security:
https://support.industry.siemens.com/cs/ww/en/view/38823402
https://support.industry.siemens.com/cs/ww/en/view/38823402 In order
In order toto protect
protect plants,
plants, systems,
systems, machines
machines and
and networks
networks against
against cyber
cyber
FAQs, see https://support.industry.siemens.com/cs/ww/en/ps/16325/faq
https://support.industry.siemens.com/cs/ww/en/ps/16325/faq threats, itit is
threats, is necessary
necessary to implement –– and
to implement and continuously
continuously maintain
maintain –– aa holistic,
holistic,
state-of-the-artindustrial
state-of-the-art industrial security
security concept.
concept. Siemens
Siemens products
products and
and solutions
solutions
represent only one component of such a concept.
represent concept.
For more
For more information
information onon the
the subject
subject of
of Industrial
Industrial Security,
Security, see
see
www.siemens.com/industrialsecurity.
www.siemens.com/industrialsecurity.

Type M200D PROFIBUS/PROFINET motor starter modules

Electromechanical switching Electronic switching
Technology designation1) DSte/RSte sDSSte/sRSSte
Mechanics and environment
Mounting dimensions (W x H x D)
• Without communication module mm 294 x 215 x 159
• With communication module mm 295 x 215 x 163
Permissible ambient temperature
• During operation °C -25 ... +55
• During storage °C -40 ... +70
Weight g 2 820/3 080 3 160/3 360
Permissible mounting position Vertical, horizontal, lying
Vibration resistance acc. to IEC 60068 Part 2-6 g 2
Shock resistance
• Acc. to IEC 60068 Part 2-27 g/ms 12/11 half-sine
• Without influencing the contact position g/ms 9.8/5 or 5.9/10
Degree of protection acc. to IEC 529 IP65
Installation altitude
• Up to 1 000 m No derating
• Up to 2 000 m 1% per 100 m
Cooling Convection

6
Protection class IEC 536 (VDE 0106-1) 1
Electrical specifications

STARTERS
HYBRID MOTOR
Main circuit
Maximum power of three-phase motors at 400 V AC kW 5.5

9
Rated operational voltage Ue
• Approval acc. to EN 60947-1 V AC 400 (50/60 Hz)
• Approval acc. to UL and CSA V AC 600 (50/60 Hz) 480 (50/60 Hz)
• Rated operational current range A 0.15 ... 2/1.5 ... 12 --
• Rated operational current range for soft starting A -- 0.15 ... 2/1.5 ... 12
• Rated operational current range for direct-on-line starting A -- 0.15 ... 2/1.5 ... 9
Rated operational current for starters Ie at 400 V AC
• 400 V at AC-1/2/3 A 12 --
• 500 V at AC-1/2/3 A 9 --
• 400 V at AC-4 A 4 --
• 400 V at AC-53a A -- 12 for soft starting,
9 for direct-on-line starting
Mechanical endurance of contactor Operating cycles 30 million --
Trip class CLASS 5, 10, 15, 20
Permissible switching frequency see manual
Rated ultimate short-circuit breaking capacity Iq
• At 400 V AC kA 50
• At 500 V AC kA 50 202)
Short-circuit protection
• At Iemax = 2 A Integrated, 2 x13 Ie = 26 A
• At Iemax = 9 /12 A Integrated, 2 x13 Ie = 208 A
1) DS .... Direct-on-line starters
RS .... Reversing starters
DSS .. Direct-on-line soft starters
RSS .. Reversing soft starters
te ...... Full motor protection (thermal + electronic)
s ....... Electronic switching with semiconductor.
2)
Only systems with grounded neutral point permitted.

Smart Infrastructure, Industrial Control Catalog 2021 6/53

 Motor
Hybrid Starters
Motor Startersfor
Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
SIRIUS M200D motor starters for PROFIBUS/PROFINET
M200D Motor Starters for PROFIBUS/PROFINET
General data
General data

Line voltage
380 V AC 400 V AC 440 V AC 480 V AC 500 V AC
Brake voltage with brake actuation 180 V DC1)
Operational voltage V 230/400 AC or 180 DC
Uninterrupted current A < 0.5 at 230/400 V AC, < 0.8 at 180 V DC
Short-circuit protection Yes, 1 A melting fuse
Rectified brake voltage V DC 171 180 198 216 225
Recommended brake coil voltage for Siemens motors V DC 170 ... 200 170 ... 200 184 ... 218 184 ... 218 --
1) Integrated brake actuation supplies DC power supply for the brake.

Type M200D communication modules

For PROFIBUS For PROFINET
Mechanics and environment
Mounting dimensions (W x H x D) mm 174 x 139 x 40
Permissible ambient temperature
• During operation °C -25 ... +55
• During storage °C -40 ... +70
Weight g 300
Permissible mounting position Vertical, horizontal, lying
Vibration resistance acc. to IEC 60068 Part 2-6 g 2
Shock resistance
• Acc. to IEC 60068 Part 2-27 g/ms 12/11 half-sine
• Without influencing the contact position g/ms 9.8/5 or 5.9/10
Degree of protection acc. to IEC 529 IP65
Installation altitude
• Up to 1 000 m No derating
• Up to 2 000 m 1% per 100 m
Cooling Convection
Protection class IEC 536 (VDE 0106-1) 1
Electrical specifications
6

Control circuit
Operational voltage
V DC 20.4 ... 28.8
HYBRID MOTOR
STARTERS

• UDC24V-NS
• UDC24V-S V DC 20.4 ... 28.8
9

Power consumption from

• UDC24V-NS mA < 300
• UDC24V-S mA < 100

6/54 Smart Infrastructure, Industrial Control Catalog 2021

 Hybrid Motor Starters Motor Starters for Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
SIRIUS M200D motor starters for PROFIBUS/PROFINET
M200D Motor Starters for PROFIBUS/PROFINET
Communication modules, motor starter modules
Communication modules, motor starter modules

■ Selection and ordering data

M200D motor starter module M200D motor starter M200D motor starter
PROFIBUS/PROFINET PROFIBUS PROFINET
(without communication module)

Version SD Article No. Price PU PS*

per PU (UNIT,
SET, M)
d
M200D communication modules for PROFIBUS
Communication module for PROFIBUS 15 3RK1305-0AS01-0AA0 1 1 unit
M12 connection for communication, 7/8" for 24 V power supply
M200D communication modules for PROFINET
Communication module for PROFINET 15 3RK1335-0AS01-0AA0 1 1 unit
M12 connection for communication, 7/8" for 24 V power supply
M200D PROFIBUS/PROFINET motor starter modules
Electromechanical starters (with integrated contactor)
15 3RK1395-6@S41-@AD@ 1 1 unit
Rated operational current setting range/A Additional price
• 0.15 ... 2 K None

6
• 1.5 ... 12 L ✓
Direct-on-line starters/reversing starters

STARTERS
HYBRID MOTOR
• Direct-on-line starters 0 None
• Reversing starters 1 ✓

9
• Direct-on-line starters with manual local operation 2 ✓
• Reversing starters with manual local operation 3 ✓
Brake actuation
• Without brake actuation 0 None
• Brake actuation (230/400 V AC) 3 ✓
• Brake actuation (180 V DC) 5 ✓
Electronic starters (with thyristors)
15 3RK1395-6@S71-@AD@ 1 1 unit
Rated operational current setting range/A Additional price
• 0.15 ... 2 K None
• 1.5 ... 12 L ✓
Direct-on-line starters/reversing starters
• Direct-on-line starters 0 None
• Reversing starters 1 ✓
• Direct-on-line starters with manual local operation 2 ✓
• Reversing starters with manual local operation 3 ✓
Brake actuation
• Without brake actuation 0 None
• Brake actuation (230/400 V AC) 3 ✓
• Brake actuation (180 V DC) 5 ✓
✓ = Additional price

Smart Infrastructure, Industrial Control Catalog 2021 6/55

* You can order this quantity or a multiple thereof.

 Motor
Hybrid Starters
Motor Startersfor
Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
Motor Starter ES
Software
Software
Motor Starter ES

■ Overview
More information
Industry Mall,
Industry Mall, see
see www.siemens.com/product?3ZS1
www.siemens.com/product?3ZS1
Technical
Technical specifications
specificationsand
andsystem
systemrequirements,
requirements,see
see
https://support.industry.siemens.com/cs/ww/en/ps/16713/td
https://support.industry.siemens.com/cs/ww/en/ps/16713/td

Motor Starter ES is used for the startup, parameterization,

diagnostics, documentation and preventive maintenance of
SIMATIC ET 200S, ET 200pro, ECOFAST and M200D motor
starters.
The software program is available in three versions which differ
in their user-friendliness, scope of functions and price.

Motor Starter ES for parameterization, monitoring, diagnostics and

testing of motor starters
6 STARTERS
HYBRID MOTOR
9

6/56 Smart Infrastructure, Industrial Control Catalog 2021

 Hybrid Motor Starters Motor Starters for Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
SIRIUS M200D Motor Starters Accessories
Accessories for all M200D motor starters
For all M200D motor starters

■ Overview

7
1

NSA0_00485a
NSA0_00484
2 4 9 10

5
M 8
3 6

1 Power feeder plug 7 Connection for motor control with AS-i communication
2 Power connection plug 8 AS-Interface M12 feeder
3 Power connection cable 9 Connection for digital input
(IO communication, 5-pole)
4 Motor connection plug
10 Connection for digital output
5 Motor plug (IO communication, 4- or 5-pole)
6 Motor cable

Power and motor connection on the M200D motor starter Communication connection using AS-Interface and digital inputs and

6
(in this example: M200D for AS-i) outputs

STARTERS
HYBRID MOTOR

9
13 14 13 14

11 12 15 15
NSA0_00488a

NSA0_00487a

9 10 9 10

9 Connection for digital input

9 Connection for digital input (IO communication, 5-pole)
(IO communication, 5-pole) 10 Connection for digital output
10 Connection for digital output (IO communication, 4- or 5-pole)
(IO communication, 4- or 5-pole) 13 Connection for 24 V supply (infeed)
11 PROFIBUS connection (input) 14 Connection for 24 V supply (loop)
12 PROFIBUS connection (loop) 15 Connection with PROFINET
13 Connection for 24 V supply (infeed) (input on the left, loop on the right)

14 Connection for 24 V supply (loop)

Communication connection using PROFIBUS and digital inputs and Communication connection using PROFINET and digital inputs and
outputs outputs

Smart Infrastructure, Industrial Control Catalog 2021 6/57

 Motor
Hybrid Starters
Motor Startersfor
Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
SIRIUS M200D Motor Starters
Accessories
Accessories for all M200D motor starters
For all M200D motor starters

16 Power bus cable (sold by the meter)

17 Power T terminal connector
18 Power double-T terminal connector

16
17 18 18

ET 200pro
M200D M200D

IC01_00231a
Motors

Power supply to the motors via the power bus with power T and double-T terminal connectors linked by power bus cables, spur lines to the field devices
6

(motor starters), and power loop-through connections to the motors via motor connection cables
Power bus Interruption-free thanks to power terminal connectors
HYBRID MOTOR
STARTERS

The power supply to the field devices (ET 200pro motor starters, In finger-safe connection technology the power T terminal
M200D motor starters) is provided via the power bus, in which
9

connectors and power double-T terminal connectors connect

the power T terminal connectors or power double-T terminal the components of a feeder to the power bus. They ensure
connectors are connected by power bus cables. interruption-free operation, i.e. the power bus is not interrupted
when the components are unplugged.
Feeders
From the terminal connectors, spur lines with Han Q4/2 plugs
lead to the field devices, from which the motors are supplied with
power via motor connection cables.

6/58 Smart Infrastructure, Industrial Control Catalog 2021

Hybrid Motor Starters Motor Starters for Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
SIRIUS M200D Motor Starters Accessories
Accessories for all M200D motor starters
For all M200D motor starters

Selection and ordering data

The accessories listed below represent a basic selection
sorted by:
• Accessories for all M200D motor starters
• Accessories for M200D motor starters for AS-Interface
• Accessories for M200D motor starters for PROFIBUS
• Accessories for M200D motor starters for PROFINET
Version SD Article No. Price PU (UNIT, PS*
per PU SET, M)
d
Mountable accessories
M200D protective brackets 5 3RK1911-3BA00 1 1 unit
Incoming power supply
 Power feeder plugs
Connector set for incoming power supply, e.g. for
connecting to T terminal connectors, comprising a
coupling enclosure, straight outgoing feeder (with
bracket), pin insert for HAN Q4/2, incl. gland
• 5 male contacts, 2.5 mm2 5 3RK1911-2BS60 1 1 unit
• 5 male contacts, 4 mm2 5 3RK1911-2BS20 1 1 unit
• 5 male contacts, 6 mm2 5 3RK1911-2BS40 1 1 unit
 Power connection plugs
Connector set for incoming power supply for connection
to M200D motor starters, comprising a cable-end
connector hood, angular outgoing feeder, female insert
for HAN Q4/2, incl. gland
• 5 female contacts, 2.5 mm2, 5 3RK1911-2BE50 1 1 unit
2 female contacts, 0.5 mm2
• 5 female contacts, 4 mm2, 5 3RK1911-2BE10 1 1 unit
2 female contacts, 0.5 mm2
• 5 female contacts, 6 mm2, 5 3RK1911-2BE30 1 1 unit
2 female contacts, 0.5 mm2

6
 +  Power connection cables
Assembled at one end with "N" and jumper pin 11 and 12
for plug monitoring, with HAN Q4/2, angular;

STARTERS
HYBRID MOTOR
open at one end; 5 x 4 mm2
• Length 1.5 m 10 3RK1911-0DC13 1 1 unit

9
• Length 5.0 m 10 3RK1911-0DC33 1 1 unit
Motor cables
 Motor connection plugs
Connector set for motor cable for connection to
M200D motor starters, comprising a cable-end connector
hood, angular outgoing feeder, pin insert for HAN Q8/0,
incl. gland
• 8 male contacts, 1.5 mm2 5 3RK1902-0CE00 1 1 unit
• 6 male contacts, 2.5 mm2 5 3RK1902-0CC00 1 1 unit
 Motor plugs
Connector set for motor cable for connection to motors,
comprising a cable-end connector hood, straight
outgoing feeder, female insert for HAN 10e, incl. star
jumper, incl. gland
• 7 female contacts, 1.5 mm2 30 3RK1911-2BM21 1 1 set
• 7 female contacts, 2.5 mm2 30 3RK1911-2BM22 1 1 set
 +  Motor cables, assembled at one end
For connection to M200D motor starters, HAN Q8/0,
angular, length 5 m
• Motor cables for motor without brake, 4 x 1.5 mm2 15 3RK1911-0EB31 1 1 unit
• Motor cables for motor without brake with thermistor, 30 3RK1911-0EF31 1 1 unit
6 x 1.5 mm2
• Motor cables for motor with brake actuation, 30 3RK1911-0ED31 1 1 unit
braking voltage 400 V AC or 180 V DC, 6 x 1.5 mm2
• Motor cables for motor with brake actuation, 30 3RK1911-0EG31 1 1 unit
braking voltage 400 V AC or 180 V DC and thermistor,
8 x 1.5 mm2
• Motor cables for motor with brake actuation, 30 3RK1911-0EH31 1 1 unit
braking voltage 230 V AC,
6 x 1.5 mm2
• Motor cables for motor with brake actuation, 30 3RK1911-0EE31 1 1 unit
braking voltage 230 V AC and thermistor,
8 x 1.5 mm2

Smart Infrastructure, Industrial Control Catalog 2021 6/59

* You can order this quantity or a multiple thereof.

 Motor
Hybrid Starters
Motor Startersfor
Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
SIRIUS M200D Motor Starters
Accessories
Accessories for all M200D motor starters
For all M200D motor starters

Version SD Article No. Price PU (UNIT, PS*

per PU SET, M)
d
Power bus
 Power T terminal connectors
For 400 V AC, for connection of feeders (e.g. motor
starters) by means of standard round cable at any point
of the power bus, by insulation displacement connection,
used with preassembled bus segments
• 2.5 mm²/4 mm² 5 3RK1911-2BF01 1 1 unit
• 4 mm²/6 mm² 5 3RK1911-2BF02 1 1 unit
 Power double-T terminal connectors
For 400 V AC, for connection of feeders (e.g. motor
starters) by means of standard round cable at any point
of the power bus, by insulation displacement connection,
used with preassembled bus segments, connection of two
motor starters possible
• 4 mm²/6 mm² 5 3RK1911-2BG02 1 1 unit
Sealing set (comprising 2 seals)
For power T/power double-T terminal connectors
• For power cables with
- Ø 10 ... 13 mm 5 3RK1911-5BA00 1 1 unit
- Ø 13 ... 16 mm 5 3RK1911-5BA10 1 1 unit
- Ø 16 ... 19 mm 5 3RK1911-5BA20 1 1 unit
- Ø 19 ... 22 mm X 3RK1911-5BA30 1 1 unit
• Blanking plugs 5 3RK1911-5BA50 1 1 unit
Further accessories for power connections
Crimping tools for pins/sockets 4 mm2 and 6 mm2 15 3RK1902-0CW00 1 1 unit

3RK1902-0CW00
Dismantling tools
6

• For male and female contacts for 9-pole 15 3RK1902-0AB00 1 1 unit

HAN Q4/2 inserts
• For male and female contacts for 9-pole 5 3RK1902-0AJ00 1 1 unit
HYBRID MOTOR
STARTERS

HAN Q8 inserts
Sealing caps
9

For 9-pole power sockets

• 1 unit per pack 5 3RK1902-0CK00 1 1 unit
• 10 units per pack 5 3RK1902-0CJ00 1 10 units

3RK1902-0CK00

6/60 Smart Infrastructure, Industrial Control Catalog 2021

* You can order this quantity or a multiple thereof.

Hybrid Motor Starters Motor Starters for Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
SIRIUS M200D Motor Starters Accessories
Accessories for all M200D motor starters
For all M200D motor starters

Version SD Article No. Price PU (UNIT, PS*

per PU SET, M)
d
Motor control with I/O communication
M12 plugs, straight 5 3RK1902-4BA00-5AA0 1 1 unit
Screw fixing, 5-pole screw terminals,
max. 0.75 mm2,
A-coded, max. 4 A

3RK1902-4BA00-5AA0
 M12 plugs, angular 5 3RK1902-4DA00-5AA0 1 1 unit
Screw fixing, 5-pole screw terminals,
max. 0.75 mm2,
A-coded, max. 4 A

3RK1902-4DA00-5AA0
,  Control cables, assembled at one end
M12 plugs, angular, screw fixing, 5-pole, 5 x 0.34 mm2,
A-coded, black PUR sheath, max. 4 A
• Cable length 1.5 m 5 3RK1902-4HB15-5AA0 1 1 unit
3RK1902-4H...-5AA0 • Cable length 5 m 5 3RK1902-4HB50-5AA0 1 1 unit
• Cable length 10 m 5 3RK1902-4HC01-5AA0 1 1 unit
Control cables, assembled at both ends
Straight M12 plug, straight M12 socket, screw fixing,
3RK1902-4PB15-3AA0 3-pole, 3 x 0.34 mm2,
A-coded, black PUR sheath, max. 4 A
• Cable length 1.5 m 5 3RK1902-4PB15-3AA0 1 1 unit
Further accessories
Handheld devices 5 3RK1922-3BA00 1 1 unit
For M200D motor starters (or for ET 200pro and ET 200S
High Feature motor starters) for local operation.
The motor starter-specific serial interface cables must be
ordered separately.
The RS 232 interface cable 3RK1922-2BP00 is used for the
MS M200D.

6
RS 232 interface cable 5 3RK1922-2BP00 1 1 unit
Serial data connection between M200D (or ET 200pro)

STARTERS
HYBRID MOTOR
motor starters and the RS 232 interface of a
PC/PG/laptop (with the Motor Starter ES software) or the
3RK1922-3BA00 handheld device 3RK1922-3BA00

9
USB interface cable, 2.5 m 3 6SL3555-0PA00-2AA0 1 1 unit
Serial data connection between M200D (or ET 200pro)
motor starters and the USB interface of a PC/PG/laptop
(with the Motor Starter ES software).
M12 sealing caps } 3RK1901-1KA00 100 10 units
For sealing unused M12 input or output sockets and
M12 sockets for PROFIBUS and PROFINET
communication modules
3RK1901-1KA00 (one set contains ten sealing caps)
RONIS SB30 keys } 3SU1950-0FB80-0AA0 1 1 unit
Replacement key for M200D
for "manual local control" ordering option

3SU1950-0FB80-0AA0

For more
For more connection
connectiontechnology
technology products,
products, seesee
https://support.industry.siemens.com/cs/ww/en/view/65355810.
https://support.industry.siemens.com/cs/ww/en/view/65355810..

Smart Infrastructure, Industrial Control Catalog 2021 6/61

* You can order this quantity or a multiple thereof.

 Motor
Hybrid Starters
Motor Startersfor
Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
SIRIUS M200D Motor Starters
Accessories
Accessories for M200D motor starters for AS-Interface
For M200D motor starters for AS-Interface

Selection and ordering data

Version SD Article No. Price PU (UNIT, PS*

per PU SET, M)
d
Motor control with AS-i communication
 Control cables, assembled at one end
M12 plug, angular, screw fixing, 4-pole, 4 x 0.34 mm2,
A-coded, black PUR sheath, max. 4 A
3RK1902-4GB50-4AA0 • Cable length 5 m 5 3RK1902-4GB50-4AA0 1 1 unit
 M12 sockets, angled 5 3RK1902-4CA00-4AA0 1 1 unit
For screw fixing, 4-pole screw terminals,
max. 0.75 mm2,
A-coded, max. 4 A

3RK1902-4CA00-4AA0
 AS-Interface M12 feeders
For flat cable For Cable length Cable end in
feeder
AS-i/Uaux M12 socket -- not available 2 3RK1901-2NR20 1 1 unit
M12 1m not available 2 3RK1901-2NR21 1 1 unit
cable box 2m not available 2 3RK1901-2NR22 1 1 unit

3RK1901-2NR21
Cable terminating pieces } 3RK1901-1MN00 1 10 units
For sealing of open cable ends (shaped AS-Interface
cable) in IP67

3RK1901-1MN00
6

AS-Interface shaped cable, see also page 2/82

Material Color Quantity
HYBRID MOTOR
STARTERS

Rubber Yellow (AS- 100 m roll 2 3RX9010-0AA00 1 1 unit

Interface)
9

1 km drum 5 3RX9012-0AA00 1 1 unit

Black 100 m roll 2 3RX9020-0AA00 1 1 unit
(24 V DC) 1 km drum 5 3RX9022-0AA00 1 1 unit
3RX90..-0AA00
TPE Yellow (AS- 100 m roll 2 3RX9013-0AA00 1 1 unit
Interface) 1 km drum 5 3RX9014-0AA00 1 1 unit
Black 100 m roll 2 3RX9023-0AA00 1 1 unit
(24 V DC) 1 km drum 5 3RX9024-0AA00 1 1 unit
TPE special Yellow (AS- 100 m roll 5 3RX9017-0AA00 1 1 unit
version Interface)
according to Black 100 m roll 5 3RX9027-0AA00 1 1 unit
UL Class 2 (24 V DC)
PUR Yellow (AS- 100 m roll 2 3RX9015-0AA00 1 1 unit
Interface) 1 km drum 5 3RX9016-0AA00 1 1 unit
Black 100 m roll 2 3RX9025-0AA00 1 1 unit
(24 V DC) 1 km drum 5 3RX9026-0AA00 1 1 unit

6/62 Smart Infrastructure, Industrial Control Catalog 2021

* You can order this quantity or a multiple thereof.

Hybrid Motor Starters Motor Starters for Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
SIRIUS M200D Motor Starters Accessories
Accessories for M200D motor starters for AS-Interface
For M200D motor starters for AS-Interface

Version SD Article No. Price PU (UNIT, PS*

per PU SET, M)
d
Further accessories
AS-Interface addressing unit V3.0 2 3RK1904-2AB02 1 1 unit
• For AS-Interface modules and sensors and actuators
with integrated AS-Interface according to
AS-i Specification V3.0
• For setting the AS-i address of standard slaves, and
slaves with extended addressing mode (A/B slaves)
• With input/output test function and many other
commissioning functions
• Battery operation with four type AA batteries
(IEC LR6, NEDA 15)
• Scope of supply:
- Addressing unit with four batteries
- Addressing cable, with M12 plug to addressing plug
(hollow plug), length 1.5 m
3RK1904-2AB02
M12 addressing cables to M12 5 3RK1902-4PB15-3AA0 1 1 unit
• Standard M12 cable for addressing slaves with M12
connection, e.g. K60R modules
3RK1902-4PB15-3AA0 • When using the current version of the 3RK1904-2AB01
addressing unit
• 1.5 m
"SIRIUS M200D Motor Starter" manuals
Manual --
Equipment Manual
SIRIUS M200D
M200D AS-Interface
AS-InterfaceBasic
BasicMotor Starter,see
MotorStarter, see
https://support.industry.siemens.com/cs/ww/en/view/35016496
https://support.industry.siemens.com/cs/ww/en/view/35016496
Equipment Manual
Manual --
SIRIUS M200D
M200D AS-Interface
AS-InterfaceStandard Motor
Basic Motor seesee
Starter,
Starter,
https://support.industry.siemens.com/cs/ww/en/view/38722160
https://support.industry.siemens.com/cs/ww/en/view/38722160

6
STARTERS
HYBRID MOTOR

Smart Infrastructure, Industrial Control Catalog 2021 6/63

* You can order this quantity or a multiple thereof.

 Motor
Hybrid Starters
Motor Startersfor
Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
SIRIUS M200D Motor Starters
Accessories
Accessories for M200D motor starters for PROFIBUS
For M200D motor starters for PROFIBUS

Selection and ordering data

Version SD Article No. Price PU (UNIT, PS*

per PU SET, M)
d
Motor control with PROFIBUS
M12 plugs, angular
For screw fixing, 5-pole screw terminal,
max. 0.75 mm2, B-coded, no terminating resistor
•  5 female contacts 5 3RK1902-1DA00 1 1 unit

3RK1902-1DA00
•  5 male contacts 5 3RK1902-1BA00 1 1 unit

3RK1902-1BA00
Control cables, assembled at one end
M12, screw fixing, angular, B-coded, no terminating
resistor
3RK1902-1G. •  5 female contacts, 3 m 15 3RK1902-1GB30 1 1 unit
•  5 female contacts, 5 m 15 3RK1902-1GB50 1 1 unit
•  5 female contacts, 10 m 15 3RK1902-1GC10 1 1 unit
  Control cables, assembled at both ends
M12, screw fixing, angular, pin/socket
5-pole, B-coded, no terminating resistor
• 3.0 m 15 3RK1902-1NB30 1 1 unit
3RK1902-1N.
• 5.0 m 15 3RK1902-1NB50 1 1 unit
• 10.0 m 15 3RK1902-1NC10 1 1 unit
Further accessories
6

PROFIBUS trailing cables 1 6XV1830-3EH10 1 1M

Max. acceleration 4 m/s2, at least 3 000 000 bending
cycles, bending radius at least 60 mm, 2-core, shielded,
HYBRID MOTOR
STARTERS

sold by the meter, minimum order quantity 20 m,

maximum order quantity 1 000 m
9

PROFIBUS FC Food bus cables 1 6XV1830-0GH10 1 1M

with PE outer sheath for operation in the food and
beverage industry, 2-core, shielded, sold by the meter,
minimum order quantity 20 m, maximum order quantity
1 000 m
PROFIBUS FC Robust bus cables 1 6XV1830-0JH10 1 1M
with PUR outer sheath for operation in environments
exposed to chemicals and mechanical loads, 2-core,
shielded, sold by the meter, minimum order quantity 20 m,
maximum order quantity 1 000 m
Power cables 1 6XV1830-8AH10 1 1M
5-core, 5 x 1.5 mm2, trailing, sold by the meter,
minimum order quantity 20 m, maximum order quantity
1 000 m
Connection for 24 V power supply of the M200D PROFIBUS/PROFINET
See page 6/65
9/45
Equipment Manual "SIRIUS M200D PROFIBUS/PROFINET Motor Starters"
See
https://support.industry.siemens.com/cs/ww/en/view/38823402
https://support.industry.siemens.com/cs/ww/en/view/38823402

6/64 Smart Infrastructure, Industrial Control Catalog 2021

* You can order this quantity or a multiple thereof.

Hybrid Motor Starters Motor Starters for Use in the Field, High Degree of Protection
SIRIUS M200D Motor Starters
SIRIUS M200D Motor Starters Accessories
Accessories for M200D motor starters for PROFINET
For M200D motor starters for PROFINET

Selection and ordering data

Version SD Article No. Price PU (UNIT, PS*

per PU SET, M)
d
Motor control with PROFINET
 M12 plugs, angular
For screw fixing, 4-pole screw terminal,
max. 0.75 mm2, angular, D-coded
• 4 male contacts 5 3RK1902-2DA00 1 1 unit
 Control cables, assembled at one end
M12 for screw fixing, angular, 4-pole, D-coded,
• 4 male contacts, 3 m 15 3RK1902-2HB30 1 1 unit
3RK1902-2H. • 4 male contacts, 5 m 15 3RK1902-2HB50 1 1 unit
• 4 male contacts, 10 m 15 3RK1902-2HC10 1 1 unit
 Control cables, assembled at both ends
M12 for screw fixing, angular at both ends,
4-pole, D-coded, male contacts at both ends
3RK1902-2N. •3m 15 3RK1902-2NB30 1 1 unit
•5m 15 3RK1902-2NB50 1 1 unit
• 10 m 15 3RK1902-2NC10 1 1 unit
Further accessories
PROFINET IE FC TP standard cable GP 2 x 2 1 6XV1840-2AH10 1 1M
Sold by the meter
PROFINET IE FC TP trailing cable 2 x 2 1 6XV1840-3AH10 1 1M
Sold by the meter
PROFINET IE FC TP trailing cable GP 2 x 2 1 6XV1870-2D 1 1M
Sold by the meter
PROFINET IE FC TP torsion cable 2 x 2 1 6XV1870-2F 1 1M
Sold by the meter
PROFINET IE FC TP marine cable, 4-core 1 6XV1840-4AH10 1 1M
Sold by the meter
Power cables 1 6XV1830-8AH10 1 1M
5-core, 5 x 1.5 mm2, trailing, sold by the meter, minimum

6
order quantity 20 m, maximum order quantity 1 000 m

Connection for 24 V power supply of the M200D PROFIBUS/PROFINET

STARTERS
HYBRID MOTOR
Plugs
On M200D, 7/8" for screw fixing, angular,

9
screw terminal, 1.5 mm2
•  5 female contacts 5 3RK1902-3DA00 1 1 unit

3RK1902-3DA00
•  5 male contacts 5 3RK1902-3BA00 1 1 unit

3RK1902-3BA00
 Supply lines, assembled at one end
7/8" for screw fixing, angular, 1.5 mm2
• 5 female contacts, 3 m 15 3RK1902-3GB30 1 1 unit
• 5 female contacts, 5 m 15 3RK1902-3GB50 1 1 unit
• 5 female contacts, 10 m 15 3RK1902-3GC10 1 1 unit
3RK1902-3G.
  Supply lines, assembled at both ends
7/8", for screw fixing, angular at both ends,
5-pole pin/socket, 1.5 mm2
•3m 15 3RK1902-3NB30 1 1 unit
3RK1902-3N. •5m 15 3RK1902-3NB50 1 1 unit
• 10 m 15 3RK1902-3NC10 1 1 unit
7/8" sealing caps 1 6ES7194-3JA00-0AA0 1 10 units
1 pack = 10 units

6ES7194-3JA00-0AA0
Equipment Manual "SIRIUS M200D PROFIBUS/PROFINET Motor Starters"
See
https://support.industry.siemens.com/cs/ww/en/view/38823402
https://support.industry.siemens.com/cs/ww/en/view/38823402

Smart Infrastructure, Industrial Control Catalog 2021 6/65

* You can order this quantity or a multiple thereof.

 Hybrid Motor Starters
Motor Starters for Use in the Field, High Degree of Protection
Hybrid fieldbus connections
General data
Hybrid fieldbus connections

Overview
Auxiliary power infeed
HanBrid plug-in connection technology offers the option of
feeding in or looping through two separate auxiliary voltages of
24 V DC (switched/unswitched) into the field in addition to the
PROFIBUS signal. The terminal block with spring-loaded
terminals on the rear (cabinet side) of the hybrid fieldbus
connection provides a variety of interconnecting options for
these auxiliary voltages.
Passive hybrid fieldbus connections
• Bushing from the control cabinet (IP20) into the field (IP65)
• HanBrid plug-in design socket/socket or pin/socket
• Direct connection or FastConnect connection for PROFIBUS at
Hybrid fieldbus connection with two HanBrid sockets the rear
• Terminal block with spring-loaded terminals (0.25 to 2.5 mm2)
for infeeding or forwarding the auxiliary voltages
IP20

IP65

Control cabinet bushing with two M12 sockets

Pin or socket Socket
6

Hybrid fieldbus connections with HanBrid sockets designed as Hybrid fieldbus connection as passive cabinet bushing
cabinet bushings transmit data and energy from the control
Active hybrid fieldbus connections with refresher function
HYBRID MOTOR
STARTERS

cabinet (IP20) to the field (IP65). They are the interface for jointly
routing PROFIBUS DP and the auxiliary voltages into the hybrid • Bushing from the control cabinet (IP20) into the field (IP65)
9

fieldbus cable. • Three independent, electrically separated PROFIBUS

On the cabinet bushings with two M12 sockets for the segments
PROFIBUS M12 connecting cables, the 24 V supply of the motor • Signal refresher function from and to all segments
starters is implemented via separate 7/8" connecting cables. • Automatic continuous baud rate detection
Passive and active hybrid fieldbus connections • Status/diagnostics displays with LEDs
The hybrid fieldbus connections are available in two versions • Cascading depth of a maximum nine hybrid fieldbus
which differ in their functionality: connections
• Passive version • HanBrid plug-in design socket/socket and pin/socket
• Active version with signal refresher function to considerably • M12 plug-in design socket/socket
increase the maximum PROFIBUS cable length • 9-pole Sub D socket connection for PROFIBUS at the rear
Connection methods • Terminal block with spring-loaded terminals (0.25 to 2.5 mm2)
for infeeding or forwarding the auxiliary voltages
The field side is connected using HanBrid or M12 plug-in
connections.
IP20
In the case of HanBrid, the following versions are available:
• Socket/socket for feeding into the field
• Pin/socket for looping through in the field
The M12 version is generally configured with socket/socket.
Refresher
Following connections are available at the rear (cabinet side) in
the case of the passive bushings:
• Direct connection
• FastConnect connection IP65

The active bushing with refresher function has 9-pole Sub D

sockets for the rear connection. Pin or socket Socket

Hybrid fieldbus connection as active control cabinet bushing with

refresher function

6/66 Smart Infrastructure, Industrial Control Catalog 2021

Siemens IC 10 · 2020
Hybrid Motor Starters
Motor Starters for Use in the Field, High Degree of Protection
Hybrid fieldbus connections
Selection and ordering
Hybrid fieldbus connections

Technical specifications
Type Passive hybrid fieldbus connections Active hybrid fieldbus connections
Mechanics and environment
Dimensions (W x H x D) mm 93 x 103 x 65
Cutout (W x H) mm 80 x 90
Temperature range °C -25 ... +60
Degree of protection IP20 internal/IP65 on field side
Material/enclosure mm Plastic (black PC), flame retardant
Electrical specifications
Rated operational voltage
• 24 V DC not switched (NS) V DC 24, ± 25%
• 24 V DC switched (S) V DC 24, ± 25%
Max. rated current A 10
Power supply -- From 24 V DC not switched (NS)
Max. power consumption mA -- 130
Mains buffering ms -- > 20
Baud rate detection -- Automatic
Maximum cascading depth -- 9 hybrid fieldbus connections
Baud rates kbps 9.6/19.2/45.45/93.75/187.5/500/1 500/3 000/6 000 /12 000
Electrical separation V DC 500

Selection and ordering data

Hybrid fieldbus connection With pin/socket Control cabinet bushing

on the field side: (HanBrid) on the field side
With socket/socket (HanBrid) With socket/socket (M12)

6
Link type / function Connection IP65 Connection IP20 SD Article No. Price PU (UNIT, PS*

STARTERS
HYBRID MOTOR
(PROFIBUS) per PU SET, M)

9
d
Hybrid fieldbus connections
Passive
• Cu/Cu, for feeding into the field Socket/socket Direct connection 5 3RK1911-1AA22 1 1 unit
(2 x HanBrid)
• Cu/Cu, for looping through in the Pin/socket Direct connection 5 3RK1911-1AA32 1 1 unit
field (2 x HanBrid)
• Cu/Cu, for feeding into the field Socket/socket PROFIBUS FastConnect 5 3RK1911-1AF22 1 1 unit
(2 x HanBrid) bus connector
• Cu/Cu, for looping through in the Pin/socket PROFIBUS FastConnect 5 3RK1911-1AF32 1 1 unit
field (2 x HanBrid) bus connector
Active (refresher)
• Cu/Cu, for feeding into the field Socket/socket 9-pole Sub D socket 5 3RK1911-1AJ22 1 1 unit
(2 x HanBrid)
• Cu/Cu, for looping through in the Pin/socket 9-pole Sub D socket 5 3RK1911-1AJ32 1 1 unit
field (2 x HanBrid)
• Cu/Cu, for feeding into the field Socket/socket 9-pole Sub D socket 5 3RK1911-1AK22 1 1 unit
(2 x M12)

Version SD Article No. Price PU (UNIT, PS*

per PU SET, M)
d
Accessories
Sealing caps for HanBrid 1 6ES7194-1JB10-0XA0 1 10 units
Protective cover for bus and power supply connection
(pack of 10)

6ES7194-1JB10-0XA0
PROFIBUS ECOFASThybrid
PROFIBUS ECOFAST hybridcables,
cables,see
seeCatalog
CatalogSTST
7070
or or
Industry Mall.

Smart Infrastructure, Industrial Control Catalog 2021 6/67

* You can order this quantity or a multiple thereof.

Siemens IC 10 · 2020
 Hybrid Motor Starters

Notes
6 STARTERS
HYBRID MOTOR

6/68 Smart Infrastructure, Industrial Control Catalog 2021