TECHNICAL DATASHEET

ADP Series Power Adapters

12V 25W/36W/66W

ADP 12V
Highlights & Features
– Energy Star Compliance (Level VI)
– IT safety approvals
– 100k Hours MTBF
– Over-Voltage/Load/Temperature & Short Circuit protections

Model Information
ADP Series Power Adapters

Model Number Input Voltage Range Output Voltage Output Current

ADP-25FW BB 90-264Vac 12Vdc 2.1A
ADP-36PH BH 90-264Vac 12Vdc 3A
ADP-66CR BE 90-264Vac 12Vdc 5.5A
 

Specifications
Input Ratings / Characteristics

25W   36W   66W  

Nominal Input Voltage 115/230Vac 100-240Vac 115/230Vac
Input Voltage Range 90-264 Vac
Nominal Input Frequency 50-60Hz
Input Frequency Range 47-63Hz
1A Max @ 100Vac 1A Max at 100Vac input 2A Max at 100Vac input
Input Current
600mA @ 240Vac voltage voltage
Inrush Current(Cold Start) <50A at 120VAC No Damage at 240Vac <90A at 230Vac

84% min, max load and

Efficiency at nominal input voltage 86% @ 115Vac measured at the end of DC 83%
cable.

Active Mode Efficiency @ 115Vac 86.38% >87.4% 88%

Active Mode Efficiency @ 230Vac N/A >84.78 88%

<0.1W @ 115Vac/60Hz and
No Load Power Consumption <0.1W @115Vac 0.21w
230Vac/50Hz
>16.7milliseconds@115Vac 10milliseconds minimum at
Hold Up Time at maximum load 5milliseconds@100Vac
>20 milliseconds@230Vac 100Vac/50Hz.
  

TECHNICAL DATASHEET

ADP Series Power Adapters

12V 25W/36W/66W
Output Ratings / Characteristics

25W   36W   66W  

Rated Voltage 12V
Voltage Range(All Models) 11.4 ~ 12.6V
Current 0-2.1A 0-3A 0-5.5A
Output Ripple and Noise @20MHz.
BW, with 0.1uF ceramic and 47uF
<120mVp-p 450mV pk-pk 120mV pk-pk
Electrolytic Caps connected parallel
to load.
3 seconds @ 90Vac/60Hz
Turn On delay time 2 seconds @ 120Vac 5 seconds @ 100-240Vac and -0°C to +45°C; OR
10 seconds at -20°C to 0°C.
Rise Time <20ms 30mS 30ms
Max Load Capacitance (microfarads) 1000 470 1000
0%-50%-0% and 50%-100%-
0.1~1.5A & 1.5A~3A load at
50% of full nominal load. 25 % step load change at 1
2.5A/us slew rate , 50% Duty
Load Transient Response frequency is 60Hz, 50% duty A/s.at frequency 500Hz with
cycle , Frequency be
cycle and the slew rate shall 50% duty.
operated 100Hz ~ 10KHz
be at 0.02A/us.

Environment, EMI and Immunity

    25W   36W   66W  
Operating Temperature 0 °C to +40 °C -20 °C to +45 °C
Shipping/Storage Temperature -20 °C to +75 °C -30 °C to +80 °C -40 °C to +85 °C
8% to 90% RH (Non- 10% to 95% RH (Non-
Operating Humidity Up to 95%
Condensing) Condensing)
Shipping/Storage Humidity 5% to 95% RH (Non-Condensing) 10-95% RH (Non-Condensing)
Maximum of 3700 meters -150 to 3000 meters
Operating Altitude Maximum of 5000 meters
(12000 feet) (-500 to 10000 feet)
L-N, L-G, N-G, IEEE
C62.41.2, 0.5 µs – 100 kHz L-N, L-G, N-G
Lightning Surge Immunity Line –Neutral 1KV/1.2 *
Ring Wave, 1.2/50 µs - 8/20 Combination Wave
Per IEC-1000-4-5 50us Level 3 Criteria A
µs Combination Wave 6KV, Criterion B
6KV, Criterion B
I EC-1000-4-4/1995 (EN
EN61000-4-4 +/-1kV on EN61000-4-4 +/-1kV on
Electric Fast Transients (EFT) 61000-4-4) Level 3
input power lines; Criterion B input power lines; Criterion B
requirements
Electrostatic Discharge (ESD) Contact discharge：±8KV +/-8kV air discharge; +/-6kV contact
Per IEC-61000-4-2 Air discharge：±15KV discharge;
Dielectric Withstand Voltage (HI-
3KV AC RMS from AC Input to Output
POT)
Leakage Current <250uA at 264 Vac <100uA at 240Vac/50Hz <250uA at 264 Vac

The insulation resistance The insulation resistance The insulation resistance

shall be not less than 4M shall be not less than 30M shall be not less than 10M
Insulation Resistance
ohms after application of ohms after application of ohms after application of
500Vdc/10mA for 1 minute. 500Vdc/10mA for 1 minute. 500Vdc/10mA for 1 minute.
(a) FCC Class B CISPR 22 :
CISPR 22/EN55022 Class
Electromagnetic Interference (EMI) (b) CISPR 22 Class B 1997/EN55022(1998) Class
B.
(c) VCCI Class B B.
200,000 hours of continuous 80,000 hours of continuous 150,000 hours of operation at
MTBF 90% confidence level at
operation at 25℃ operation at 25℃ 25degC
3 years at 115 Vac and 230 5 years at 115 Vac and 230
7 years at 115VAC, 40C and
Electrolytic Capacitor Operating Life Vac, and 25degC 100% Vac, and 25degC 100%
100% rated load
rated load rated load
  

TECHNICAL DATASHEET

ADP Series Power Adapters

12V 25W/36W/66W
Protections
25W   36W   66W  
<150% of nominal output
Overvoltage Latch Mode Latch Mode
voltage (Recovery mode)
<150% maximum load
Overload / Overcurrent Auto-Recovery Auto-Recovery
current (Recovery mode)
Over Temperature Recovery mode Latch Mode Auto-Recovery
Short Circuit Recovery mode Auto-Recovery Auto-Recovery
 

Mechanical
25W   36W   66W  
Color Black
Outline Dimensions (L x W x D) 102 * 36.8 * 49 mm 89.5.0 * 37.0 * 26.5 mm 132 * 62 * 34.1 mm
AC Inlet Type Fixed 2 pin AC Blades Socket C6 type Socket C14 Type
DC Cable Type UL2468 #AWG20 UL1571 #AWG17 UL1571 #AWG14
DC Cable Length 1500 mm 1800 mm 1500 mm
DC Connector - OD 2.1 mm 4.75 mm 2.5 mm
DC Connector - ID 5.5 mm 1.7 mm 5.5 mm
DC Connector - Length 10.5 mm 12.5 mm 9.5 mm

Mechanical
ADP-25FW BB
  
 
TECHNICAL DATASHEET

ADP Series Power Adapters

12V 25W/36W/66W

ADP-36PH BH

ADP-66CR BE

 www.DeltaPSU.com (January 2016, Rev. 1.0)    

4