Scribd
Upload
23 views1 page

1

The inspection report details the results of various tests and checks conducted on assembled motors, confirming that all inspected points were found to be satisfactory. It includes witness and review points, along with a disclaimer regarding the verification of technical content. The manufacturing process is completed, and the report is intended for the client with restrictions on reproduction.

Uploaded by

rockingrc007
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
23 views1 page

1

The inspection report details the results of various tests and checks conducted on assembled motors, confirming that all inspected points were found to be satisfactory. It includes witness and review points, along with a disclaimer regarding the verification of technical content. The manufacturing process is completed, and the report is intended for the client with restrictions on reproduction.

Uploaded by

rockingrc007
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Industry & Facilities Division

Procurement Services Page 3 of 7


Inspection Report

3. Cl No. 4.0 IP 55, PESO YES


4. In Process Inspection CL No. 2.2 Assembled Motor YES

E1 – Details of Witness (W) & Hold (H) Inspection Points

MQP POINT INSPECTION POINT


ACTIVITY DESCRIPTION
No. (Hold / Witness / Review)
Cl No.3.1.A.a Resistance of Stator Winding, Check and found OK Witness
Space Heater Resistance, IR (Before & After) & HV Tests, Check
Cl No.3.1.A.b
and found OK
Not Applicable
Cl No.3.1.A.c RTB(N/A), BTD(N/A), Thermister resistance Check and found OK Not Applicable
Cl No.3.1.A.d Insulation Resistance Before & After HV, Check and found OK Witness
Cl No.3.1.A.e HV Test, Check and found OK Witness
Cl No.3.1.A.f No Load Tests at Rated Voltage, Check and found OK Witness
Cl No.3.1.A.g Reduced voltage running at No load, Check and found OK Witness
Cl No.3.1.A.h Vibration Measurement on No Load, Check and found OK Witness
Cl No.3.1.A.i Locked Rotor Tests at reduced Voltage, Check and found OK Witness
Cl No.3.1.A.j Noise Level Measurement on No Load, Check and found OK Witness
Cl No.3.1.B.1 Name Plate Verification, Check and found OK Witness
Cl No.3.1.B.2 Dimension Check (Mounting Dimensions), Check and found OK Witness
Cl No.3.2.j Dimension Check (Shaft), Check and found OK Witness
Cl No.3.2.k Dimension Check (Centre height), Check and found OK Witness
Cl No.2.3.a Painting: Paint Shade, Check and found OK Review
Cl No.2.3.b Painting: Paint Thickness, Check and found OK Review
Cl No.3.2 Type Test Report. Review
Cl No.4.0.a Test for Degree of Protection of encloser (IP 55). Review

E2 – Details of Monitoring and Surveillance Patrols Tick if conducted during the visit
N/A

E3 – Details of Certificates Review Tick if conducted during the visit

The following documents reviewed are listed below.


1. IP 55 Report
2. Calibration Status.
3. PESO Certificate.
DISCLAIMER
BVIL has only verified the technical content during the certificate review of bought out item(s) and is not
accountable for any compliance with lab traceability to ISO/IEC 17025 or NABL Accredited laboratory.
E4 – Problem Pending / Area of Concern
N/A
E5 – Manufacturing Process Status
Manufacturing process completed, offered lot shown in final condition.

INSP PROC 002-En Rev.3.2 C – MAY 2021 Inspection Report No. SPIPL/DEL/KSB/4936/IR/01

This inspection report is relevant to inspection services performed by Bureau Veritas for and on behalf of the Client.
Inspection or verification report shall not be reproduced except in full without the approval of the inspection body and the client.

You might also like