Bluetooth gesture-controlled remote using ESP32 and BNO055 sensor.

Unified sensor driver for the Adafruit BNO055 orientation sensor breakout

This project is designed to harness the capabilities of Arduino, an electronic compass, and an inertial measuring unit (IMU) BNO055 to control an SG90 servo motor using the HW-170 PCA9685 driver, all communicating over the I2C Bus

Arduino Code for robot automation using BNO055 magnetometer and MKR GPS

DIY autopilot for sailing boat. Goto to wiki to get informations

Repository for Endgame - An experiment in alt controllers for video games built using Unreal Engine and Arduino

Arduino library for the 7Semi BNO055 9-axis IMU sensor. Supports I2C, Euler angles, quaternions, and calibration tools.

Unified sensor driver for the Adafruit BNO055 orientation sensor breakout

A tool for quantifying Cerebral Palsy severity and treatment effect.

STM32 library for the Bosch BNO055 IMU with integrated sensor fusion

The start of a VERY rudimentary flight controller for UAV's.

Bosch BNO055 Driver

Source code and circuit diagram for using heading information from a sensor for direction control of Free flight model FAI-Categorie F1E

Using a ESP32-S3 to emulate a GS-232 satellite rotator controller for gpredict

F1E electronic magnetic steering device / direction control by magnetic sensor BNO055

Small RGB LED Pendant using 1010 (1.0x1.0mm) WS2812B LEDs powered by an ESP32-C3 Mini with a BNO055 IMU

bno055 library for platformio

Example how to interface the accelerometer sensor on the Octopus IoT badge and display on a LED matrix.