A GPS setup to log your track lap times, based on ESP32, with the ability to interface with several mobile phone apps that log your speed and position via Bluetooth Low Energy, Bluetooth or WiFi

GPS module to nerve_pcb

Python library for parsing SPARTN protocol messages.

A driver for ublox gps

ROS2 package for Ublox GNSS Receiver.

Software, electronics (input devices) and mechanical accessories for using a phone as karting logger and display

node.js driver for ublox gps

Software for a Raspberry Pi based muon detector system of the MuonPi project.

Naima is a autonomous vehicle developed using ROS 2, featuring the Nav2 stack, Map Server, Ublox GPS, and the ZED2 stereo camera. All components are integrated into a complete real-world autonomous driving system focused on perception, localization, and navigation.

u-blox GPS ROS2 Driver A lightweight and efficient ROS 2 Humble driver for interfacing with u-blox GPS modules over serial communication. Tested on Ubuntu 22.04 with the u-blox M8030 chipset.

An Orange Pi Zero GPS disciplined NTP server, with an SPI TFT display.

How to enable raw GNSS data in u-blox NEO-M8N receivers (Firmware 2.01)

A basic NMEA GPS parser designed and tested with the u-Blox MAX-8 series of GPS receiver connected to a Raspberry Pi.

Realtime Base / Rover RTK GPS Positioning With CM Level Accuracy

This repository contains a simple C# application that reads GPS data from a uBlox GPS module via a serial port. It processes the GPS NMEA sentences, particularly $GPGGA and $GPRMC, and converts the raw latitude and longitude values into decimal degrees.

Driver for the GNSS EVK-M101-00-02 Module for the STM32 platform

Time interval counter based on TI TDC7200 chip with GPS modules for precise time standard comparison.

ROS2 drivers for U-blox ZED F9P

Arduino library for the fastest and simplest communication with u-blox GPS modules