USBasp v2.0 DS18X20 temperature probe

CLI interface for USBasp v2.0 DS18X20 temperature probe

C/C++ language program for specified device (based on the Atmega328P microprocessor) that takes basic care of plants. [PL]

Buttons and blinkenlights on a usbasp

This is the modified version of USBasp firmware with automatic clock (SCK) speed detection.

A Hardware to program any kind of AVR µController.

AVR cheat sheet for the ATmega328p

Automatic Software Controlled Clock, Jumper-Free, USBasp

Convert zhifengsoft (03eb:c8b4) USB ISP ASP AVR programmer to an USBasb programmer (USBasp from http://www.fischl.de/usbasp/).

Reemplazo de la ruleta del juego twister con un ATMegar328p y unos leds

Notes for using the ATtiny10 with the open source AVR toolchain

DIY Simple Arduino In-System-Programmer (Perf board USBasp clone)

An AVR Programmer based on USBasp which uses a ZIF-Socket for Programming.

Merge of USBASP-PDI (from nieldk) and usbasp-uart (from akrasuski1) and some ISP code added

USBasp DIY AVR Programmer

USBASP programming board

Testing temperature and humidity sensors DS18B20 and DHT11 (DHT22) with ATmega8 and tiny display monitor SSD1306. Non-blocking codes, custom soldered board.

VusbPro is the enhanced V-USB, a software-based USB device using an AVR MCU

USBasp - USB programmer for Atmel AVR controllers with WinUSB support

USBasp firmware working with a clone "USB ISP Version 2.0" (marked "MX-USBISP-Vx.00 on the PCB)