usbasp

Program allow you to program flash memory on the protocols spi, I2C, MicroWire. Supports CH341a, CH347, UsbAsp, AVRISP(LUFA), Arduino, FT232H.

AsProgrammer dregmod allow you to program flash memory on the protocols spi, I2C, MicroWire. Supports Buzzpirat, Bus Pirate, CH341a, CH347, UsbAsp, AVRISP(LUFA), Arduino & FT232H

AVR cheat sheet for the ATmega328p

USBasp firmware working with a clone "USB ISP Version 2.0" (marked "MX-USBISP-Vx.00 on the PCB)

usbasp improved firmware

USBasp - USB programmer for Atmel AVR controllers with WinUSB support

Notes for using the ATtiny10 with the open source AVR toolchain

An Object Pascal UART Terminal for USBasp UART firmwares.

An AVR Programmer based on USBasp which uses a ZIF-Socket for Programming.

USB programmer for Atmel AVR controllers (based on USBasp) with extra features

A variant of the programmer USBAsp with the ability to program in parallel high-voltage mode.

Digispark ATtiny85 setup with command line interface. Simple LED blinking example to test frequency and timing.

Development-focused V-USB optimization for AVR-GCC, emphasizing easier firmware and host integration, clearer code, and measured USBasp Mod performance.

CLI interface for USBasp v2.0 DS18X20 temperature probe

A compact digital dice roller with a 7-LED face powered by ATtiny13. Includes PlatformIO firmware, KiCad schematics, and PCB design for a DIY electronic dice game.

Convert zhifengsoft (03eb:c8b4) USB ISP ASP AVR programmer to an USBasb programmer (USBasp from http://www.fischl.de/usbasp/).

USBasp DIY AVR Programmer

USBasp v2.0 DS18X20 temperature probe

Testing temperature and humidity sensors DS18B20 and DHT11 (DHT22) with ATmega8 and tiny display monitor SSD1306. Non-blocking codes, custom soldered board.

This is the modified version of USBasp firmware with automatic clock (SCK) speed detection.