Reemplazo de la ruleta del juego twister con un ATMegar328p y unos leds

USBasp DIY AVR Programmer

C/C++ language program for specified device (based on the Atmega328P microprocessor) that takes basic care of plants. [PL]

A Hardware to program any kind of AVR µController.

USBASP programming board

Merge of USBASP-PDI (from nieldk) and usbasp-uart (from akrasuski1) and some ISP code added

Buttons and blinkenlights on a usbasp

DIY Simple Arduino In-System-Programmer (Perf board USBasp clone)

Automatic Software Controlled Clock, Jumper-Free, USBasp

USBasp-WinUSB-WINDOWS 11

Testing temperature and humidity sensors DS18B20 and DHT11 (DHT22) with ATmega8 and tiny display monitor SSD1306. Non-blocking codes, custom soldered board.

USBasp v2.0 DS18X20 temperature probe

This is the modified version of USBasp firmware with automatic clock (SCK) speed detection.

CLI interface for USBasp v2.0 DS18X20 temperature probe

Convert zhifengsoft (03eb:c8b4) USB ISP ASP AVR programmer to an USBasb programmer (USBasp from http://www.fischl.de/usbasp/).

VusbPro is the enhanced V-USB, a software-based USB device using an AVR MCU

A variant of the programmer USBAsp with the ability to program in parallel high-voltage mode.

Digispark ATtiny85 setup with command line interface. Simple LED blinking example to test frequency and timing.

USB programmer for Atmel AVR controllers (based on USBasp) with extra features

An Object Pascal UART Terminal for USBasp UART firmwares.