bmp388

BMP388 full-featured driver library for general-purpose MCU and Linux.

Driver for BMP388 that uses STM32_HAL libraries

Arduino library for interfacing with the BMP388 barometric pressure sensor which can be used for inferring altitude information.

Bosch Integrated Environmental Unit (bmp280 / bme280 / bme680 / bmp388/ bmp390)

A platform independent CPP library for BMP390 barometric sensor.

BoatSensor for temperatur, pressure and winddata. Windata input NMEA0183 over WLAN. All data output to NMEA2000.

Bosch BMP3XX sensors series library wrapper for Arduino

Python module to use the BMP388 pressure and temperature sensor

This is one of my projects comparing a digital UV sensor and an analog on for the Cubes in Space Program!

Build a Smart Home using ESP32

Air quality monitoring on Raspberry Pi Pico, sent to Victoria Metrics, shown on Grafana: CO2, Humidity, Temperature, Volatile Organic Compounds, ..., you name it!

ESP32 flight computer with MAVLink telemetry, QGroundControl integration, GPS, BMP388 altimetry, INA219 power monitoring and fault-tolerant SD logging

Nearly minimal Arduino code to read raw sensor measurements and calibration data for BMP280 and BMP388 and separate decoder.

BMP388 altimeter sensor driver for the Raspberry Pi Pico