Autonomous RC car using Raspberry Pi and ANN

Ros package for basic autonomous lane tracking and object detection

1ZLab在准备挑选合适的小车来研发计算机视觉的教程时候 , 发现习惯了Python语法的我们, 在市面上找不到合适小车, 后来我们选了ESP32作为小车的控制主板, 可以使用Python对其进行交互式编程, 极大的提升了开发效率.

ROS package to control an autonomous RC vehicle based on Raspberry Pi3

Platform for small-scale self-driving vehicles.

Self driving RC-car pays for car barrier on its own. This repository contains code for some autonomous car techniques applied to an RC-Car.

Self-driving RC Car ROS Software

Autonomous RC-Car racing competition in HKUST

Autonomous RC car using Raspberry Pi. Uses picamera data, OpenCV for processing, along with ultrasonic sensor data to drive autonomously.

A ROS2 project for autonomous car racing RC CAR. Code can run both in the physical car, as well as in simulation.

remote control car. used wifi esp8266 board and micropython

This project is an RC Car that can be controlled through facial movements picked up by an OpenBCI EEG device.

Python-based 3D-Printed Electric Rover

This project is full functional implementation of wltoys v202 protocol,specified for rc cars A959, A969, A979 in micropython or esp32 idf with nrf24l01 module

Python software for a remote control car consisting of a 2-motors-3-wheel-platform, raspberry pi 3, motor control L293D, bluetooth xbox controller as remote control and an ultrasonic distance sensor

Capturing video and sensor data with a Teensy and Raspberry Pi, then composing it

A fully 3D-printed remote controller that uses Long Range (LoRa) radio communications to control an RC car.

🎮 Python firmware for rc controlled car 🏎️💨

This is a simple Raspberry pi zero based wifi car base thing (Atleast in its current form). This is a simple python script based on python curses library that allows the keyboard input to control the car.

Operating System for Self Driving Small Vehicles