🔍 A Hex Editor for Reverse Engineers, Programmers and people who value their retinas when working at 3 AM.

📚 Modern C++ Tutorial: C++11/14/17/20 On the Fly | https://changkun.de/modern-cpp/

Marlin is a firmware for RepRap 3D printers optimized for both 8 and 32 bit microcontrollers. Marlin supports all common platforms. Many commercial 3D printers come with Marlin installed. Check wit…

The official firmware for Meshtastic, an open-source, off-grid mesh communication system.

MQTT gateway for ESP8266 or ESP32 with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ the…

Wifi & BLE driven passenger flow metering with cheap ESP32 boards

Multiprotocol TX Module (or MULTI-Module) is a 2.4GHz transmitter module which controls many different receivers and models.

Brushless servo and quadrupedal robot

This is the fully-functional GNU Radio software-defined radio (SDR) implementation of a LoRa transceiver with all the necessary receiver components to operate correctly even at very low SNRs. This …

Arduino LoRa EBYTE E32 device library complete and tested with Arduino, esp8266, esp32, STM32 and Raspberry Pi Pico (rp2040 boards). sx1278/sx1276

An open source 3GPP LTE implementation.

Simple balancing hoverboard robot